Question about Belkin Computers & Internet

2 Answers

I have another laptop which i want to use with my belkin wireless router,but when prompted to enter password and connect i can remember the code as my works it people set it up are they a way of resolving this issue as we have changed it providers

Posted by on

  • 2 more comments 
  • gordon675 Dec 09, 2008

    All I want to do is connect to my existing network provider,but when prompted to connect it's asking for Wireless Security Password (encryption key)



    Driving me nuts can you help

  • gordon675 Dec 10, 2008

    Got it fixed I managed to get the password, I then entered the settings and set it to a family member name and birth date yeeeehaaaa

  • Jay Glendenning
    Jay Glendenning May 11, 2010

    Do you have access to logging in to the router?

    What model router is it?


  • Jay Glendenning
    Jay Glendenning May 11, 2010

    So are you trying to get into the router or just use the wireless of the router.

    I want to be sure of what "password" you need?




×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 124 Answers

The security password is the encryption password for the wireless network. You are still getting to your ISP, but via the Wireless network that's set up on the Router. If you can't get the wireless password, connect a Cat5e cable to the router itself and work that way.

Posted on Dec 09, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 236 Answers

If I understand this correctly, Your work's IT people setup your router and you need the Security Password to access?

You should ask your work's IT people for the password.
If you are asking how to break that security key, I'm am not sure you will find that info here.

Posted on Dec 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WHERE DO I FIND THE WPA CODE FOR BELKIN N WIRELESS ROUTER. I DONT HAVE THE MANUAL AND IM TRYING TO CONNECT TO MY PS3


Hi,
goto Google and put in name (Belkin N Wireless Router) and model number (_________), manual. Push enter. Down load the manual; it is a PDF file. WPA is a security code made up of hexadecimal numbers. zero thru nine and A thru F. 0123456789ABCDEF SIXTEEN SYMBOLS O-15

Nov 27, 2010 | Computers & Internet

1 Answer

How do I install a wireless router


Connect it to your modem. Locate the IP address for the router. It should either be on the bottom of the router or in your manual

Open your browser and enter that IP address into the address bar. You will also need to locate the default user-name and password, should be with the IP address. Enter that information when prompted.

Locate the wireless settings in your router admin area, enable wireless output, set security settings (remember to write them down) and connect your computer to your wireless network.

Sep 21, 2010 | Computers & Internet

1 Answer

I need a key code for my belkin wireless router


From any computer that connects properly open a command prompt window and type ipconfig /all and write down the default gateway address. Open up your browser and enter the ip address that you wrote down in the address bar. Enter the userid and password for your router and you should get the first screen for your router. look around for wireless setup, wireless security, wireless encryption or similar. When you find the right screen, you should be able to find the wep or wpa key code originally entered.

Jan 09, 2009 | Computers & Internet

1 Answer

I wish to connect to my wireless network via my new dell laptop but the password i have entered is incorrect. the laptop is now connected to the internet/network but with limited accesss, when i try to...


Do you know now the password for your wireless??

If no then on the PC/laptop that it was orginally installed-click on start and run and type cmd which will open up command prompt.

Type in the black box -ipconfig...

Whatever the IP address is for your default gateway type it in Internet explorer which will open up your wireless router settings and you should be able to open up wireless security and find out what your password is..

When this is done disconnect from your wireless on the dell laptop and after disconnecting connect to your wireless again and enter your password and see if that fixes things.

Thanks

Sophia

Jan 06, 2009 | Computers & Internet

1 Answer

Wish to change my password on the Belkin G Plus Nimo router and cannot remember where to go to get in and do it


1. Access the router's setup page by going to 192.168.2.1.
2. By default, there is no username and no password. Otherwise if you have created a password to access the router's page already then use that password.
3. If you want to change the administrative password of the router, go to "System Settings".
4. If you want to change the wireless security for your wireless connection, then go to wireless settings tab of the router.

Nov 07, 2008 | Belkin Computers & Internet

1 Answer

Hello, I have a RCA digital broadband model #DHG535-2 modem from comcast, i recently purchased a Linksys wireless-g broadband router model #WRT54G2V1 The problem I am having is connecting from my laptop...


If your trying to connect wirelessly with your laptop make sure that you have the following information of the router;
1. Wireless network name or SSID
2. Wireless security settings; WEP 64/128 bit ot WPA

If your not familiar with the settings then you may need to access the setup page of your wireless router. Hardwire the laptop to the router or if you have a main computer that is already connected with an ethernet cable, open Internet Explorer or Mozilla Firefox or any web browser you are currently using. On the address bar type http://192.168.1.1 (router's default IP), then you will receive a pop up asking for a username and a password, there is no username and for the password type "admin" then click the Wireless tab on the router and check the basic wireless settings, if your not comportable with the settings then change the following; SSID - use a name that is easy to remember, Channel - 1,6, 11 is ideal, then for the Wireless Security choose WPA Personal and enter a 8 digit WPA Passphrase(pasword), remember to click save settings every tab that yuo go to or else the settings will na take effect. Then check if the laptop will detect the signal of the router and when it prompts you for a password or network key, just enter the 8 digit code that you have configured earlier.

If you have further questions regarding the setup of the router just post a reply and I'll to give you a response if my sched will allow me.

Hope this will atleast provide you with some idea in setting the router properly for your laptop.

Regards,



Sep 02, 2008 | Computers & Internet

1 Answer

I have just connected a wireless router belkin 125 G. My son has just got a laptop so I wanted to go wireless. There is a signal on his laptop but it is saying the signal is unsecured how do we make this...


you need to get into the router settings (refer to your installation cd for instructions) and choose either WEP, or WPA-PSK, this will be in the security menu, it will then generate a mixture of numbers and letters, these then have to be entered in all the pcs to connect to the router, you will be prompted by windows for the keys when you try to connect

Aug 18, 2008 | Belkin Computers & Internet

1 Answer

Need to hookup router for laptop to access inter-net. I already have a Belkin Wireless G Router -2.4hz-802.11g. It needs to be re-configured after being shutdown.


connect your pc to router using a lan (RJ45 cable), then open up internet explorer and type 192.168.0.1 or 192.168.2.1 in the web address, you can then enter the default password and username and then set up your router

Aug 16, 2008 | Belkin Computers & Internet

1 Answer

We have purchased a new notebook{higrade brand vista OS} to replace a packard bell using XP the XP laptop connected no problem the newone finds the belkin router but won't connect to the internet are...


Do you have a wireless security protocol enabled, and if so, what? Install a wired connection to the router (use an ehternet cable to connect your laptop's RJ-45--looks like a wide phone plug--into one of the Belkin router's network jacks). Go to the router's management page using your web browser (probably http://192.168.2.1). If you have not previously set the password in your router, simply leave the password field blank and CLICK "Submit". If you have previously password protected your Belkin router, use the known password. If you have forgotten your password... you'll need to reset your router.
 
Reest Router: there is usually a small hole into whiuch a pin or paper clip can be inserted for this purpose or a small button to press. Most Belkins--IIRC--have the button. 

Once you are on the Belkin router's management page, look for the wireless link and set your security protocol to match what your wireless card is capable of, set the password, save and exit. Use the sasme password in configuring wireless networking in Windows.

Jul 17, 2008 | Belkin Computers & Internet

2 Answers

Setting up a Wireless Connection


you might want to check the www.belkin.com site to see if that can support Mac Powerbook.

Mar 09, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...