Question about Phones

1 Answer

Samsung DS 24D Phone System WHILE ATTAENDING INCOMING CALL NO BEEPING IS HEARD FROM INTERCOM CALL

Posted by on

  • Anonymous Apr 01, 2009

    While on a call, when a new call comes in the ring volume is three times the volume of normal. How to turn off the ringer (permanent solution - not every time i pick up the phone) when I am on another call.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

This is an option to ring or not to ring while on a call. Your local phone man should be able to help you with that basic programming

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung ds 24d - how to set the hold time before it rings again


hi, this is a feature which is in engineering programming, if you have access to this the MMC required is 501 the codes are 'Sys Hold' and 'Trans Hold', If you don't have access, you will need to contact your Telecoms maintainer. Alternatively you could use the exclusive hold, check out this site for more information - http://www.abbeytelecom.com

Aug 02, 2011 | Samsung Prostar DCS-24B-LCD Corded Phone

1 Answer

How do i program a new intercom button on the samsung lcd 24b pho


There are called DS keys on Samsung telephone systems and this clip demonstrates how to set one up. There's more at www.AbbeyTelecom.com

Jun 15, 2009 | Samsung Prostar DCS Phone

1 Answer

Cant get ITCM light to stop flashing - no ring tone for incoming


If you're really lucky, you only put the system in night mode. From extension 10 press ITCM and #. Days :-)


Carl

Jun 03, 2009 | Comdial Impression 2022S-PT Corded Phone

1 Answer

I have a NEC ETW 16DC-2 phone that does not ring with calls


The telephone instrument you have can be used on the NEC Electra Professional Level I, and the Level II systems (and under some conditions the NEAX 2000 series). Codes for features are somewhat different based on the system. It is possible that your phone is in "Do-Not-Disturb" if other phones on your system actually ring when they are called via the intercom (on the Level I and Level II systems, initial intercom ring is a system wide setting). The cancel DND code is: Level I system: with telephone idle, press <FNC>, dial 60, press <FNC>. Level II system: with telephone idle, press <FNC>, dial 69, press <FNC>.
It is also possible that your ring volume is very low. To adjust, press <SPKR>, dial 601, then adjust volume using the up/down keys at the bottom of the phone (press <SPKR> when finished. If your system is programmed to access an outside line when you press <SPKR>, you will need to press the <INTERCOM> button first.)
If your system is set for voice intercom, people calling your phone can make it ring by dialing a "1" after your intercom number.
If you do all this and your phone still won't ring on incoming calls, let me know and we'll have to go into system programming to correct it.

Jan 06, 2009 | NEC Electra Professional ETW-16DC-2

1 Answer

Incoming calls to office cause all phones to ring in classrooms


Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.


Press feature "00" to logout
Hope that helps

Dec 02, 2008 | Lucent PARTNER18 Corded Phone

1 Answer

Samsung DS 24D Phone System


You need to lengthen the "next port" Timing in MMC 601. 15-17 second should do it. I don't want to go into program access here as anyone could reprogram your system and possibly mess it up.. If you wanted to call me I could walk you thru it in under a minute. 909-496-5887

Aug 28, 2008 | Phones

1 Answer

How do i reset the time on my Samsung DS 24d


I've posted a really easy to follow Video for you on how to change the date and time on the Samsung Prostar ( up to 70 more like this are available from abbeytel on youtube, all relating to issues on the Samsung Prostar) or go to http://www.abbeytelecom.com

Jul 11, 2008 | Samsung Prostar DCS-24B-STD Corded Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...