Question about Logitech QuickCam for Notebooks Pro Personal Web Camera

1 Answer

I have a logitech quick cam go, it was working properly but when i detached it and kept it in a box for a day and next again i took it out the image was blurred

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Hi my name is Hussainy

There could be two reasons for the blurr ness

1)when you were handling the webcam you might have touched the lense of the cam so clean the lense of the cam.

2)The focus of the cam needs adjustment.....There will be something to adjust the focus....

If you find this post helpfull please vote

Regards

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to get the software or drivers I need to run my Quick web cam. When I changed over to my Linux Ubuntu 10.04 updated again the free software wasn't offered again that I was using the other day....


1st You download Webcam Driver.
software or drivers
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Aug 08, 2010 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

I downloaded my Logitech Quick Cam after switching


Disconnect the camera, start in Safe Mode and go to Device Manager. In there disable the camera and try to uninstall its driver. Next delete manually all files and folders relating to it. Reboot again in Safe Mode and run a registry cleaner like Eusing.
Finally uninstall it in Programs.

Mar 04, 2010 | Logitech Webcam

1 Answer

I need a solution to let my cam work under vista premium


hi there go to www.logitech.com and go to support, you can click on an image of your cam or the type ie quick cam, you can download the drivers from there, remember not to plug in your cam until the programs have been installed on your computer, good luck

Aug 24, 2009 | Logitech Webcam

1 Answer

"error 2178 logitech quick cam pro 9000 installation"..cant insta


Normal 0 Double click on this site
http://www.logitech.com/index.cfm/support_downloads/&cl=us,en
Then
Search by Image (Match what yours looks like)
or
Search by Name
and
Product Name.
This will then take you to the next window where you need to select your
Operating System
. Then you will get your download driver.
Then do this:
Disconnect the Camera from the USB port and reinstall the CD or Downloaded softwareprogram. When the program asks you to connect the camera to theUSB port, do so and it should work.Then to use it on the Web, do this.
Web Camera’s have to besetup on the program they are to be used with. Just installing the cameraon your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order forthe Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Yourfriends and Family will now be able to see and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hopethis helps. Bud

Hope this helps. Bud

Mar 31, 2009 | Logitech QuickCam Pro 9000 Web Cam

2 Answers

Hi.. i have a quick cam express.. .. but on box there is no model no mention


Go to this site and you can look at the IMAGES and identify your camera and then download the right drivers.
Normal 0 Go to this site
http://www.logitech.com/index.cfm/support_downloads/&cl=us,en
Then
Search by Image
or
Search by Name
and
Product Name.
This will then take you to the next window where you need to select your
Operating System. Then you will get your download driver.
Hope this helps. Bud

Dec 29, 2008 | Logitech QuickCam Express 5-Pack Personal...

1 Answer

Blurred image


After you get your camera installed properly, DO NOT unplug it from the USB port as it will cause
the drivers to be corrupt and render the camera unusable till reinstalled it properly.

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.


A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger

1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Dec 09, 2008 | Logitech QuickCam for Notebooks Pro...

1 Answer

Logitech quick cam pro 9000


Hello!

Logitech does not support Quick Cam Pro 9000 on MAC OS. The only two supported operating systems are Windows XP and Windows Vista.

You might go with a bit more expensive Quick Cam Vision Pro that is supported on Mac.

For more info on Quick Cam Vision Pro visit: http://tinyurl.com/5fa4f6

For more infor on Quick Cam Pro 9000 visit: http://tinyurl.com/6ouwlm


Dec 08, 2008 | Logitech Webcam

1 Answer

LOGITECH QUICK CAM CHAT


Normal 0 Go to this site
http://www.logitech.com/index.cfm/support_downloads/&cl=us,en
Then
Search by Image
or
Search by Name
and
Product Name.
This will then take you to the next window where you need to select your
Operating System. Then you will get your download driver.
Hope this helps. Bud

Jun 29, 2008 | Logitech QuickCam Messenger Web Camera

3 Answers

Web cam


hello,
i have solution for this question but only for msn.........i dont use skype messenger.........so first u install software of logitech properly in u r comp then open windows live messenger........click the tools>audio and video setup..then press next n then select ur cam logitech quick cam pro 9000.....n then u see ur pic on that box..then finish it.......now try use it it will work......

Feb 17, 2008 | Webcams

Not finding what you are looking for?
Logitech QuickCam for Notebooks Pro Personal Web Camera Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Webcams Experts

gaucherre

Level 2 Expert

180 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

Are you a Logitech Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...