Question about Panasonic CW-C101MU Air Conditioner

1 Answer

Help!!!!!!!! could die if u dont!!!!!!!!

Ok i have a t.v but its not a panasonic!!i just made up all that!!!!! i really need helpp!! my tv has color on the top but messed up color everywhere else!!!!! if u can fix PLEASE SEND ME A E_MAIL @!!!!!! plz!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 198 Answers
Re: help!!!!!!!! could die if u dont!!!!!!!!

Hello. Maybe you have a magnetized display. To get rid of that, plug your tv out from the mains and find a soldering gun (those used by electronics guys). Place the lateral of the gun near on the front of the display (touching the glass) press the button and slowly move the soldering gun around all the surface of the display. Carefull not to touch anything or yourself with the tip of the gun, it get's hot. Do this for about 2 minutes. Then power back the tv and check if something is different.

Posted on Feb 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I replace the transformer?

#1turn high voltage off to the unit service disconnect or at your panel box.there will be two wires comeing out one side of transformer. And could have four out other side .I dont know what t-from. You have .take notes and pic with your phone if you can there should only be two wires for your low voltage wireing and two for your high side.on high voltage side it will show you one wire as common usealy its white than pick other color for what voltage you have going to unit 110 or 240 volt s.the old t-from should have wireing diagram on it .cut wires by old transformer just cut wire at wire nuts leavening color of wire and wire nut so it stays with wireing to old transformer at this point hopefully you should be able to follow what wire goes to wire on transformer. If you have any extra high voltage wires just wire nut them separately only useing two.I hope this helps without seeing t-from its hard to be exact but just be very aware of what wire goes to t-from and you will be ok .note dont go by color sometimes color s will be different on each t-from

Apr 03, 2015 | Air Conditioners

1 Answer

Every thing is working, but dont cool the house down. i check the pressure and can not get a reading

Seems you have a leak & lost your Freon Coolant! Have someone add some Freon with leak detector & look for a oiley color, usually purple die or red die! If their is any Freion in your system you should show some pressure readings!

Aug 05, 2011 | Carrier 38CKC042 Air Conditioner

1 Answer

Our pellet fire seems to take a long time to ignite and start flaming we are using a sack of pellets from last year can you helpp it is taking aboout 20 minutes to produce a small flame

I suspect that the sack of pellets left over from last year, have absorbed a lot of moisture during that time. Therefore, they are hard to light and slow to get up to a roaring flame. Really, there's not much you can do to correct this. Other than stop using that sack of pellets to get the fire started. Use a new fresh bag to start the fire and add the others to the hopper, after the fire gets really hot.

Hope this helps you.

May 17, 2011 | Air Conditioners

2 Answers

We can get the pilot light on but the logs do not have a flame

If that is a millivolt type heater, the pilot generator is weak. It will hold the pilot but not operate the solenoid. Get a new pilot generator. If it works ok for a minute or 2 but dies then the pilot safety feature is dusty and nees to be blowed out.

May 09, 2011 | Air Conditioners

1 Answer

Our bedroom Samsung AC died last night-really need it

Samsung AC died, really need it.

If the air conditioner blew a fuse or a breaker was tripped in the house, then reset the breaker or replace the fuse.

If the air conditioner fan works, and it's blowing hot air, then the freon level may be low in the air conditioner's piping system.

If the air conditioner is less than 30 days old or within the warranty period, take it back where you bought it for a replacement.

If it needs recharged, contact an a/c repair place that can recharge it.

Actually, new air conditioners cost around $100 which is very reasonable considering how it affects comfort and safety in the room it is used.
These are a few ideas that I would think about if I were in the same shoes as yours.

Good luck fixing it.

Jul 08, 2010 | Samsung Air Conditioners

1 Answer

Transformer died, got a Packard Universal PF42440 for Heil furnac

Look at the tranformer. It should tell you which wires are the primary side and which are the secondary side. It may have more than 2 wires on the primary so it can be used for more than 1 voltage. Now depending on what voltage the a/c uses find the wires in the a/c with that voltage on them (110v or 220v) and connect one of those 2 to the lead for that voltage on the primary and the other to the common on the primary. Next the secondary side should have 2 wires, probably yellow and blue but maybe not. I don't know the color of the wires in your a/c but one leg of the primary usually connects to a red wire and the other to a blue wire that probably come from a ciruit board or thermostat. Make sure you do not connect 110/220 to the wires for the low voltage side. If this doesn't help let me know what color the wires in your unit are and we can go from there.

Jun 03, 2010 | Haier Air Conditioners

3 Answers

How to determine horse power of air conditioner

air conditioning units are measured in btu's stands for
(British thermal units)

6,000 BTUh to 10,000 BTUh will cool 400 sq.ft approximately

10,000 BTUh to 16,000 BTUh. will cool about 800 sq.ft approximately

16,000 to 28,000 BTUh will cool 2,000 sq.ft approximately

the idea is more but's the more cooling power it will have.

Aug 20, 2009 | Panasonic CW-XC203EU Air Conditioner

1 Answer

Air con stuck on cooling mode!

Is this a Mini Split Ductless type Heat pump? Has it worked in the heat mode for you before? Have you tried killing and reapplying power to both the indoor and out door sections? Does it have a wireless remote? Are the batteries new in it?

I have to assume a lot because there is a lot of information missing to really know how to help you.

If these items helped would you please grade me accordingly. Thank you and GOOD LUCK.

Mar 03, 2009 | Panasonic Air Conditioners

2 Answers

Panasonic CW-17700R Air Conditioner

It depend the area of the room and aircon you use try consult near applianes near you.Ask Panasonic on line .

Jan 07, 2008 | Panasonic CW-1406BU Air Conditioner

2 Answers

Split system airconditioner Panasonic model CU-A28CKR.not responding to remote

Try turning of the power to the unit.Wait 60 seconds and try it again.This may reset the unit.

Nov 24, 2007 | Air Conditioners

Not finding what you are looking for?
Panasonic CW-C101MU Air Conditioner Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Air Conditioners Experts

Bill Long

Level 3 Expert

571 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Panasonic Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides