Question about Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

I HAVE LOST MY INSTRUCTION BOOK FOR THE STEAM VAC SPIN AND SCRUB. I WANT TO USE THE STAIR ATTACHMENT, BUT I CAN'T FIGURE OUT HOW TO HOOK IT UP, OR OPERATE IT. I SEE WHERE THE PLUG IN PART GOES IN THE FRONT OF THE MACHINE, BUT I CAN'T GET THE OTHER PART TO SLIDE INTO PLACE ON THE FRONT OF THE RESOVIOR TANK AFTER I REMOVE THE FRONT PANEL, AS THE DIRECTIONS ON THE FRONT OF THE RECOVERY TANK SAY TO DO. THE FIT IS JUST TOO TIGHT. WHAT AM I DON'T WRONG- OR HOW COULD I GET A REPLACEMENT INSTRUCTION BOOK///??? MRS. VIRGINIA DAY REDMOND, WASH. THANK YOU FOR HELPING ME OUT.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 107 Answers

You can download a PDF version of the manual at the link below. I believe you can contact Hoover as well and they might mail you one.

http://www.hoover.com/CustomerService/Manuals/Default.aspx

Good Luck!

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why will my hoover spin scrub steam vac upholstery attachment not suction?


With this model, check all hose connections and recovery tank lid. if you have good suction before you put on the tool it may be the tool that needs service. inspect the tube under the recovery tank for the round gasket and the filter inside the tank.

Aug 26, 2014 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

I have a Hoover steam vac spin scrub and with the attachment the water sprays out continuously reagardless if I press the button.


Just had this problem. Use a pair of needle nose pliers to tug up on the white nozzle at the end of the attachment. It should slide up about 1/4 of an inch and then you should be good to go. Be careful not to snap the plastic.

Nov 14, 2012 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Help. The brushes on my Steam Vac Spin Scrub


If you don't have the user's manual for the machine, here it is:
www.thinkvacuums.com/pdf/uprights/Hoover_F5914900.pdf

Check your system for any obstructions that could possibly causing the problem. Also, remove the brushes and see if there's a problem between the brushes and the motor.

Aug 25, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Do not know how to use Hoover Steam Vac Spin Scrub


Hoovers website, Hoover.com has them free to print.

Jun 13, 2009 | Hoover SteamVac F5914-900 SpinScrub...

3 Answers

Hoover Steam Vac leaks like a sieve


I have the same problem with my hoover steam vac, different model but same problem. So I have had it for 2 years and never used the attachments because the thing leaked out the bottom when i tried. So today I tried to find a solution online and found nothing. So I started toying with the thing and found a solution for my model and I hope it will work for everyone else. I don't have a stair attachment so this goes for the upholstery cleaning attachment. I noticed right where my upholstery attachment connects to get soap, there is a second hole that is covered by a white rubber seal when the cover for the connection area is closed. I put a plastic bag, or anything to seal it, into this hole to make a tight seal. Tried the machine and worked like a champ. So Would be nice if hoover supplied a plug for that, but oh well worked for me hope it works for others with a hoover steam vac.

Jan 04, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

We are not sure how to hook up the upholstry attachment for our spin and scrub steam vac and we don't have the manual any more. can you help ?


Most manuals can be downloaded from the Hoover Web site. However, if you cannot find your exact model # there should be something close to it. If you can provide your model # and I can check what is available

Dec 20, 2008 | Hoover Steam Vac Dual V w/ SpinScrub...

2 Answers

Hoover steam vac spin scrub


http://geeksquad.fixya.com/ThreadView.aspx?prdid=40488&thid=640907
Hoover steam vac spin scrub
Posted by mid-nite on Jun 02, 2008
My aunt lost the instructions to her steam vac, and she never got the chance to read them. Do you know how to operate it?

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Hoover SteamVac F5914-900 Spin Scrub Upright. The best thing to get an owners manual is to download the owner’s manual from the Hoover website or to call your local vac dealer or to call the Hoover Factory / Manufacturer to have them send you out in the mail a new owner’s manual for the model you have listed above . the phone 3 are listed below:

. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

http://www.a-1vacuum.com/ 1-800-657-1874 Customer Service
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 02, 2008 | Hoover SteamVac F5914-900 SpinScrub...

2 Answers

HOOVER STEAM VAC SPIN SCRUB


Cannot hook the upholstery cleaner into slot..lost manual in fire

Jun 16, 2007 | Hoover SteamVac F5914-900 SpinScrub...

Not finding what you are looking for?
Hoover SteamVac F5914-900 SpinScrub Upright Vacuum Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...