Question about Sis Xabre 400 Ultra, (128 MB) Graphic Card

1 Answer

I need sis330 for my PC - Sis Xabre 400 Ultra, (128 MB) Graphic Card

Posted by on

  • Anonymous Dec 10, 2008



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 38 Answers


try this, you will need to register on driver guide but it is free to do and this might be a match, if not then a quick search on the site will get it for you, it is a sis330? or is it the xabre 400?

Posted on Dec 11, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

PC screen problem: do I need a new graphics card (where to find?) or is it a driver or other problem?

I had that once but so long ago I can't exactly remember the cause.

I think I replaced the graphics card.
If my memory is correct I was sure it was the graphics card because my pc had on-board graphics that had been disabled because a graphics card had been fitted so I removed the card, transferred the video lead and restarted and it worked ok, just not as well. I replaced the graphics card and it was fine.

If your pc has on-board graphics that is currently being used, it probably means the motherboard is defunct, though fitting a graphics card in an expansion slot could render it usable once more.

Jul 25, 2016 | Graphics Graphics Cards

1 Answer

I am doing animation so maya is 3d its need graphic card.and i have 2gb ram intel core2 duo cpu,e7200 @2.53GHz. and i have 160 gb hard disk.ok.and when i am playing high graphic games then my...

There are several reasons for hardware hangup.
But, if there is a problem with nVIDIA PCI express card, then the problem could be with the GPU.

It can be overcome by doing reflow technique.
You need to do following.
1. Uncover ur PC casing
2. Locate the nVIDIA PCI-E Card.
3. On the card, locate the power supply pin of GPU fan.
4. Remove the pin.
5. Switch on ur PC.
6. Still u may get scrambled display/wavy screen, but wait for 5 minutes.
7. Press reset button on ur PC.
8. Ur PC might work.
9. Switch it off.
10. Connect the power supply pin back as it is.
11. Power on ur PC.
thats all.

Removal of fan power, makes the GPU to get high heat, it a reflow technique.
Remember, not to touch the GPU portion (heat sink), as it may be in higher temperature.
Try this, it works most.


Feb 21, 2010 | ASUS NVIDIA GeForce 9400 GT,, PCI Express...

1 Answer

Connect PC to TV using S Video

Here is the list from Newegg, all these cards will work with your motherboard and all have a S Video socket. You can base your choice on price,review or what you need to go by.

Jul 12, 2009 | Graphics Cards

1 Answer

Ati readon 2400

For this operation, you will need to power off the PC and connect your monitor to the ONBOARD graphics connector on the motherboard. While you have the PC powered off, unplug the PC and remove the newly installed card and reboot.
Download and install DriverSweeper, save it to your desktop.
Reboot into SafeMode and run DriverSweeper selecting ONLY the drivers that are ATI related but NOT your chipset drivers. If you had an Nvidia card previously installed, you need to select those drivers as well.
After that is complete, restart the PC into normal mode and THEN power the PC off completely. Reinstall the ATI 2400 and hook up the VGA cable to it.
Reboot the PC but within seconds after you press the power button, start tapping the F2(or applicable key) key to access the BIOS. In the BIOS ensure that the Video is set to the proper interface AGP or PCI-express but NOT onboard.
Then go here to download Omega Drivers.
Just follow the prompts and good luck.

Jul 07, 2009 | ATI RADEON HD 2400 PRO Graphic Card

1 Answer

Self Test Check Your PC & Signal Cable Monitor Is Working''

ok the only 2 ways to verify is first hook up your monitor up to another pc and verify that the monitor works and the 2nd method is to get a video card and try it and order for the other card to work the onboard video card must be disabled in the bios by hittinf f1,del,f10 or if you are uncomfortable with this take your pc to a repair shop and let them check it out
Pls take time to rate this solution

Feb 17, 2009 | Graphics Cards

1 Answer

How to download sis330 xabre

This might help

its the standard xabre driver

Dec 09, 2008 | Sis Xabre 400 Ultra, (128 MB) Graphic Card

1 Answer

Network card

hi im wesley. ok well is your computer newish or older model if its a newer model you can just get a standard network card but if its old you mite not be able to get one its very rare to find olderones not mant pc shops sell them anymore otherwise you mite need to upgrade you pc

Jul 08, 2008 | Graphics Cards

1 Answer

Getting my Matsui TV to play sound out of the PC VGA source

you need a cable to connect the sounds from your PC to TV. you need a baby plug to RCA plug.then you have to connect the baby plug to your pc soundcard audio output to your TV sound input.

Mar 13, 2008 | Graphics Cards

Not finding what you are looking for?
Graphics Cards Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sis Graphics Cards Experts


Level 3 Expert

96683 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

phoenix chi
phoenix chi

Level 2 Expert

389 Answers

Are you a Sis Graphics Card Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides