Question about Sony XL-2100U Projector Lamp for KF-42WE610, KF-50WE610, KF-60WE610, KDF-60XBR950, KDF-70XBR95

1 Answer

Sony kf-60we610 stand by blinks 5 times

We have a sony kf-60we610. The tv won't come on at all. It makes a buzzy noise, then blinks green a few times and makes the buzzy noise again. Then the stand by light blinks red 5 times.

Posted by on

  • rmonihan Jan 18, 2009

    KF 42WE610 is my model
    5 red blinking lights...it doesn't come on at all
    Light blinks green for about 2 minutes, then goes to red.

    I called the # 888-772-7669 and it's indeed 3 for TV, then 1.

    5 blinking lights - first test is to unplug for 1 min, then plug in again and see if it works.
    Mine did not. Responder says service is required and technician needs to visit.

  • jrkane208 Feb 19, 2009

    My Sony KF-60WE610 was purchased in Nov 2004, It was working fine until I turned it off and about 1 hr turned it back on and nothing happened. Green light blinked then it went to red light blinking. Didn't count how many times it blinked. I am assuming the lamp needs replaced.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hey there,
I've had my Sony KF-50WE610 for approx. 4years now and have just experienced the prob you described (though I didn't think to count the number of red blinks). I called Sony TV technical support (888-772-7669, #3 for TV/digital cameras, #1 for TV, then #1 again I think). They said that if the power/standby light blinks 5x, that means there's something wrong with the lamp driver and service will be required. Needless to say, I better go home and count my red blinks! Good luck, I hope this helps a bit. Have a happy and safe holiday!

Posted on Dec 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

5C00 Error Code as well as yellow and green alternating lights


To fix this error is much easier than it looks. Unplug the printer power. Move the ink cartridge cradle to the left. Over to the right you will see a small pad about 1cm square. This pad and the area around should be covered with ink. Get a cloth and press down on this pad - it's not fixed so should come away with the cloth, otherwise use tweezers gently. Squeeze the pad several times between your thumb and forefinger while inside the microfibre cloth to remove ink build up. Then when not much ink comes out on the cloth, clean the area in the printer around the pad so that looks free from ink too. Then position the pad back in place, move the cradle back into position, plug in and switch on - should work fine now.

Jan 14, 2017 | Office Equipment & Supplies

1 Answer

I have a 324 singer memomatic. Carriage is stuck solid and won't move. It has been stored for a long time. Is it possible to get the carriage off in this instant if so how?


First are you referring to all internal carriage working parts or just bobbin workings ? I just got done last nite with a Kenmore that was sitting who knows how long and was completely froze internally and bobbin area covered with green muck . After cleaning that up still froze ,oiled any and all mechanical points and rocking back and forth about to give up ,found one more location on back of machine ,oiled heavy and began turning very hard over and over and became loose enough for motor to turn . So don't give up . Good Luck .
Regards , Douglas

Jan 13, 2017 | In Office Equipment & Supplies

1 Answer

Sharp ar gives me error number h4 how to let it work again


The error H4 stands for the heater roller H3 (Fuser) temperature is low and probably burnt out. You need to call for service.

Jan 08, 2017 | Sharp Office Equipment & Supplies

1 Answer

Can i print Recipes & Instructions book


Yes you can! Here are a few sites for recipes. Kraftfoods.com, cookiefest.com, foodtv.com cookiesetc.com bonniescookies.com, ETC, If you want more recipe sites. Just type in on pc, what your looking for. Crafts, recipes, or what ever. My wife uses the recipes a lot. If you do not know how to make a certain thing, just type in search bar on pc. Hope this helps! Good-Day!

Aug 29, 2014 | Office Equipment & Supplies

1 Answer

A train leaves Middelburg at 09:00 and arrives in Johannesburg at 11:00 having traveled a distance of 180 km. Find the average speed of the train in m/s.


Journey time 2hrs = 2 x 60 mins = 2 x 60 x 60 seconds
Distance 180 km = 180,000 m
Average speed = 3 x 6 x 10000 / 2 x 6 x 6 x 100 m/s
= 6 x 6 x 100 x 100 / [2 x (2 x 6 x6 x100)] m/s
= 100 / 4 m/s
= 25 m/s

5.May.2014

May 05, 2014 | Office Equipment & Supplies

1 Answer

180/900 in the lowest terms


180/900 is 1/5 in the lowest terms.

Divide both 180 and 900 by 180. 180 divided by 180 is 1, 900 divided by 180 is 5. This gives 1/5.

Mar 10, 2014 | Office Equipment & Supplies

1 Answer

My DeVille 80 typewriter won't unlock and it's been like it for over 3 hours


Try to unplug for 30 min ,if still having problem go to mfg web site for instructions .

Feb 25, 2013 | Office Equipment & Supplies

1 Answer

Laser printer makes light clicking noise when idle


When idle is potentially the fuser unit, after heating and cooling. However the print quality issue associated with the clicking sound could indicate an electrical issue. The HVPS maybe faulty causing the print quality issue (due to dependant parts) and the electrical click. In any case I would recommend calling Brother and finding the nearest authorised service agent.

Oct 20, 2012 | Brother Mfc-9840cdw All-in-one Laser...

3 Answers

HP Laserjet 3330. Scanner bulb warming up doesn't go away. I have done the "solution 1" as discribte but nothing is happening. It goes like: - i put the power on, hewlett packard is flashing, the...


How does the bulb look? Is it bright or kind of dim. The bulb warming error is designed to halt use of the machine until the scanner bulb reaches the correct output level. As these are basically a flourescent tube, they will dim over time and at a certain point they will not generate enough light to enable proper scanning. If the bulb is dim, it will require replacement.

Mar 14, 2011 | Office Equipment & Supplies

Not finding what you are looking for?
Sony XL-2100U Projector Lamp for KF-42WE610, KF-50WE610, KF-60WE610, KDF-60XBR950, KDF-70XBR95 Logo

1,294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Office Equipment & Supplies Experts

shaun taylor

Level 3 Expert

1265 Answers

Jaime Hernandez

Level 3 Expert

2275 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...