Question about Refrigerators

1 Answer

My dometic 2553 3 way fridge wont get below 10 degrees celcius

The fridge has been off for 6 months and when I turned it back on it took a long time to get down to 10 degrees. The freezer seems to be working allright but not the fridge compartment. The unit is in a caravan and I was told that it could be ventilation or cooling problems as we are in a caravan park in north qld where it is very hot and humid. I have tried taking away the outside vents and using a fan to cool down the unit but doesnt seem to work.Can anyone help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My 3-way fridge won't work on anything, coils in back get hot but nothing to worry about, hoot.

Posted on Sep 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The freexer in my RM2652 is at 20 degreesand fridge at 60 after 6 hours of dc power and 2 hours of electric power at a campsight.What can I do?


Can anyone help with this? My freezer is at 20 and my fridge at 50 degrees.... My unit is only 4 months old... Please respond to: ldgunkel@pacbell.net... We are 3 months in to a one year trip... Thanks for any help...

Jul 20, 2014 | Dometic RM2652 Refrigerator

1 Answer

Fridge freezing food


6 degrees Farenheit = -14.44 degrees Celcius
Water freezes at 32 degrees Farenheit or 0 degrees Celcius
Most food contains water, so what's the question?

Mar 09, 2014 | Refrigerators

1 Answer

Danby DWC2727BLS temperature does not go lower than 60 degrees


am having the same problem, and same circumstance. Did you find a solution?

Jun 11, 2012 | Danby Silhouette® DWC276BLS Wine Cooler

1 Answer

My Samsung Cooltech plus fridge's temperature keeps on skipping back to 9 degrees celcius. Freezer is working fine, what can the problem be?


Every time I select my fridge and freezer temperature from -16 and 3 degrees C respectively it keeps on going back to 20 and 18 degree C. Please assist.

Mar 11, 2011 | Samsung CoolTech Plus / Basic Bottom Mount...

1 Answer

I have a dometic rm 4605 aes fridge in my motorhome priblem is wont work on gas can not hear auto ignition spark when turned to gas works ok on 12v & 240v


G'day I have a Dometic RM4605,184LT FRIDGE, AES what setting on gas would you have the fridge set. Settings are between 1 to 5 for max cold in the fridge I did run the fridge for two hours on number 4 setting but it was still 10 degrees in the fridge and -0 in the freezer.
Thanks

Jan 23, 2011 | Dometic Refrigerators

1 Answer

Hi samsung fridge runs fine gets to desired temp then wont kick in again until it warms up.


the fridge will run until it reaches the temp. there should be a differential of 2 degrees so when the temp rises by 2 degrees the fridge should restart so you will need to make sure the differential is set to 2 degrees celcius on controller

May 21, 2010 | Refrigerators

1 Answer

Dometic 2600 rv fridge


UNPLUG AND TURN IT UPSIDE DOWN FOR A DAY OR TWO. YOU MIGHT HAVE AMONIA CRISTALS BUILT UP IN YOUR PIPES. TURN IT BACK AND SWITCH ON YOU GAS BURNER AGAIN. THIS WILL SOLVE YOUR PROBLEM. IF NOT, GET A TECHNICIAN TO CHECK IT OUT.

Sep 07, 2009 | Dometic WA3210 Compact Refrigerator

1 Answer

DOMETIC RM 7651l HAVE POWER AND GAS TO THE FRIDGE BUT WONT START (TWO MONTHS OLD)


Igniting a Dometic gas fridge
    Electronic Ignition
    1. Open gas cylinder or pressure regulating valve
    2. Turn on Electronic ignitor switch
    3. Turn gas control knob to the MAX position, press and hold down
    4. After ignition, hold down knob for a further 15 seconds before releasing. The neon light will stop flashing
    Piezo Ignition
    1. Open gas cylinder or pressure regulating valve
    2. Turn gas control knob to the MAX position, press and hold down
    3. After approximately 10-15 seconds
      press Piezo knob several times until pilot light a lit
    4. After ignition, hold down knob for a further 15 seconds before releasing
  1. Check the Pilot light is alight
  2. The flame can be controlled by aperture ©
    Should no ignition occur, repeat the ignition process after 1 minute
    (This could take longer than 10 seconds if the unit has been out of operation for a prolonged period or after replacing the gas cylinder. (Cause: air in the lines)
  3. Once sufficient refrigeration has been obtained in the cooling tank at the MAX position, the control knob should be turned to the MIN position by low outside temperatures or when the refrigerator is only lightly loaded respectively the ambient temperature is below +18c in order to avoid over freezing the contents.
I hope this helps you...

Regards

Wouter...

Sep 30, 2008 | Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

549 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4636 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...