Question about HP Color LaserJet 2600n Printer

1 Answer

2600N Printer has an output paper jam

How to release the fuser to clear output jam

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • HP Master
  • 990 Answers

Open the back cover you will see a blue knob , just turn it ,jamming paper will coming out

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Out put jam in the printer 2600n hp


This could be a fuser issue or a paper exit sensor issue. Please take out the fuser and check the pressure roller. Be careful, the fuser is extremely hot.

May 11, 2015 | HP LaserJet Printers & Copiers

1 Answer

Paper Jam errror


Hi,

Jam in output bin - duplex area
Error message
Jam in output bin
alternates with
Open door and clear jam
Description
Paper jam in duplex reversing area
Action
  1. Clear the jam.
  2. Press the (SELECT) button on the control panel.
  3. If the problem continues, contact HP Customer Support Center for technical assistance at http://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information.
Jam in output bin - fuser area
Error message
Jam in output bin
alternates with
Open door and clear jam
Description
A paper jam has occurred in the output bin near the fuser area.
Action
  1. Clear the jam.
  2. Press the (SELECT) button on the control panel.
  3. If the problem continues, contact HP Customer Support Center for technical assistance at http://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information.

Goodluck..

May 14, 2008 | HP Color LaserJet 2600n Printer

1 Answer

Paper jam printer 3524


Clear the jammed paper as follows.

If the jammed paper is removed completely by using the information in the following steps, you can install the paper tray first, and then close the front cover and the printer will resume printing automatically.



If the printer does not start printing automatically, press the Go button. If the printer still does not start printing, please check that all the remaining jammed paper has been removed from the printer. Then try printing again.

Pull the paper tray completely out of the printer.

Pull the jammed paper up and out of the printer.

Press the cover release button and then open the front cover.

Pull out the drum unit assembly. Pull the jammed paper up and out of the printer. If you cannot remove the drum unit assembly easily at this time, do not use extra force. Instead, pull the edge of the jammed paper from the paper tray. If the jammed paper can not be pulled out easily, turn the jam dial towards you as you gently pull the paper out.

Open the face-up output tray. Pull the jammed paper out of the fuser unit. If the paper jam can be cleared, go to Step 7.

Open the jam clear cover. Pull the jammed paper out of the fuser unit.

Close the jam clear cover. Close the face-up output tray. If the paper jam still cannot be cleared, for HL-5130 and HL-5140 users go to Step 10, and for all other users go to the next step.

Pull the Duplex Tray completly out of the printer.

Pull the jammed paper out of the printer or the Duplex tray. Put the Duplex tray back into the printer.

Push the lock lever down and take the toner cartridge out of the drum unit assembly. Take out the jammed paper if there is any inside the drum unit.
Put the toner cartridge into the drum unit until you hear it lock into place. If you put it in properly, the lock lever will lift automatically.

Put the drum unit assembly back in the printer.

Put the paper tray in the printer.

Close the front cover.

Dec 21, 2010 | Printers & Copiers

1 Answer

We have a HP Laserjet 2600N. There is a jam in the fuser delivery section. Someone tried to clear the jam but left torn paper inside. How can I remove the jammed/torn paper? Is there a lever that will...


I'm sorry to inform you I referenced the removal of the fuser as it's simple for most machines. However on the 2600 it's buried inside. If you can pull it out the machine will have to opened up to remove the paper. The process includes 18 steps to get it out.

If you want the instuctions on how to remove I can upload them to scribd and provide you with a link. Other than that it would require a service call to a technician or your IT department.

Oct 20, 2010 | HP Color LaserJet 2600n Printer

1 Answer

How to open drum to remove the jammed paper inside


Hi Good day!! here are the steps how to remove paper jam in brother hope it help's you!!
1. Pull the paper tray completely out of the printer.
2. Pull the jammed paper up and out of the printer.
3. Press the cover release button and then open the front cover.
4. Pull out the drum unit assembly. Pull the jammed paper up and out of the printer. If you cannot remove the drum unit assembly easily at this time, do not use extra force. Instead, pull the edge of the jammed paper from the paper tray. If the jammed paper can not be pulled out easily, turn the jam dial towards you as you gently pull the paper out.
5. Open the face-up output tray. Pull the jammed paper out of the fuser unit. If the paper jam can be cleared.
6. Open the jam clear cover. Pull the jammed paper out of the fuser unit.
7. Close the jam clear cover. Close the face-up output tray. If the paper jam still cannot be cleared, for HL-5130 and HL-5140 users go to Step 10, and for all other users go to the next step.
8. Pull the Duplex Tray completely out of the printer.
9. Pull the jammed paper out of the printer or the Duplex tray. Put the Duplex tray back into the printer.
10. Push the lock lever down and take the toner cartridge out of the drum unit assembly. Take out the jammed paper if there is any inside the drum unit.
11. Put the toner cartridge into the drum unit until you hear it lock into place. If you put it in properly, the lock lever will lift automatically.
12. Put the drum unit assembly back in the printer.
13. Put the paper tray in the printer.
14. Close the front cover.

Oct 19, 2010 | Brother MFC-7440N Laser Printer

4 Answers

My printer says there is a jam in the output bin but there is no visable jam. HP color laserjet 2600n


Hi,
Just try the steps
Jam in output bin - fuser area Error messageJam in output binalternates withOpen door and clear jam DescriptionA paper jam has occurred in the output bin near the fuser area. Action
  1. Clear the jam.
  2. Press the c00381085.jpg (SELECT) button on the control panel.
Jam in output bin - duplex area Error messageJam in output binalternates withOpen door and clear jam DescriptionPaper jam in duplex reversing area Action
  1. Clear the jam.
  2. Press the c00381085.jpg (SELECT) button on the control panel.Please Rate my response!!!Thanks, SF

Jan 28, 2010 | HP Color LaserJet 2600n Printer

2 Answers

Paper Jam


Not easy, thats the fuser, normally it is damaged and beyond it causing paper to jam there, no easy fix, cant pull it out without major screwdriver challange...I think thats this one... some fuser s(hot bit that paper exits), are pop out by green release tabs but if I have my models right these are the cheaper version and they fix them to the machine thus ensuring you upgrade..modern world..

Nov 05, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Jamming on Output bin...


Ok if the paper is half way coming out, Two things could be happening.
1.) Either your paper feed tires are Slipping and haven't reached the outpit bin sensor in time.
2.) second problem could be is that the fuser film is worn and is not fuser correctly and needs to be replaced.

Are you getting an Error Codes ???

Mar 06, 2009 | HP Color LaserJet 2600n Printer

1 Answer

How to clear paper jam in output bin


The printed page comes through the hot fuser at the top of the printer, through the exit rollers an end up in the exit bin.
We cleared a massive paper jam out of the fuser, by removing the grey surround on top of the printer. The plastic hooks that hold it in place get broken in the process, then you will the jammed paper between the fuser rollers, and the exit rollers. A technician can do it for you, but is unessersarly costly.

Dec 21, 2008 | HP Color LaserJet 2600n Printer

1 Answer

Paper jam


That part is the fuser unit and is hot if the printer is on. Here are instructions for you. Good Luck!

http://www.laserpros.com/pdf/HP%202600-2605%20fuser-etb.pdf

Jul 27, 2008 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
HP Color LaserJet 2600n Printer Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...