Question about Vtech 5.8GHz Cordless Phone with Digital Answering System

1 Answer

Set-up 4 v-tech answering machine

I need to know how to set up my answering machine.so when some one call they can hear you have reach .please leave a message

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Vtech Master
  • 96,612 Answers

Since you neglected to specify the model of your VTech 5.8GHz cordless system I can only suggest you enter it into the search box here to download the manual.

Posted on Dec 02, 2012

  • kakima Dec 02, 2012

    Since you neglected to specify the model of your VTech 5.8GHz cordless system I can only suggest you enter it into the search box here to download the manual.

×

3 Suggested Answers

  • 1 Answer

SOURCE: answering machine

Please tell me how to program my answering machine so a message can be left on our machine.

Posted on Jul 12, 2008

  • 1 Answer

SOURCE: answering machine is scrambled

I had the same problem, even took one phone and base set back for new trade. I had the same problem with the second one until I installed a DSL internet Filter in my telephone input line. That cured the problem.

Posted on Mar 12, 2009

  • 508 Answers

SOURCE: Retrieve a deleted message from my V Tech answering machine

to late!!! :(

Posted on Jul 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vtech answering machine will not pick up properly


could be outgoing message is set to announce only without an anounce only message being recorded. see http://pdfstream.manualsonline.com/8/8c8ae66b-b461-40cb-b213-039e3c56ab64.pdf page 28

May 02, 2014 | Vtech ia5874 Cordless Phone

1 Answer

Vtech phones


is memory full on answering machine

May 02, 2014 | Vtech ia5874 Cordless Phone

1 Answer

How to set ringer from 2 rings to 4 or more on v-tech vtcs6114


The CS6114 isn't an answering machine. It will continue to ring until someone or something picks up or the caller hangs up.

If you have an answering machine connected to your phone, consult its documentation. If you need further assistance, please repost your question and identify the answering machine.

Feb 26, 2013 | New Vtech Vtcs6114 Dect 6.0 Single Handset...

1 Answer

I have lost my manual and do not know how to set up my answering machine part of my v-tech cordless phone/answering machine. I have successfully made a personal recording on it and I hear it come on when...


Since you didn't specify the model of your VTech phone, please enter the model number into the search box at
http://www.vtechphones.com/vtechphones/index.cfm/support/general/manuals/
to get the manual.

Sep 06, 2011 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

HOW DO I SET THE DATE & TIME ON THE ANSWERING MACHINE DS6221-1


Hi there, I found my manual that states:
Press MENU/SELECT to display menu when in idle mode.
Press the up or down triangles to reach DATE/TIME. Press MENU/SELECT.
Use the keypad to set the year. Press MENU/SELECT.
Use the keypad to set the date. Press MENU/SELECT,
Use the keypad to set the time. Press the up or down triangles to select a.m. or p.m. Press MENU/SELECT
The screen displays STORED and you'll hear a confirmation beep.

George Rocks

Apr 18, 2010 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

How to change the numbr or rings before...


1) With the phone in standby mode, press the menu/clock key three times.
You hear “Ring time” and the current ring time ([2 ], [ 4], [6 ], [T ] Toll
saver), and it is displayed on the main base. Then you hear the guidance for setting
the ring time.

2) Press the volume/select/ or up or down arrow key until the desired ring time appears.

3) Press the set key to select the new ring time. You hear a confirmation tone, then
the announcement “Ring time” followed by the new ring time. After a few
seconds, the system announces “To set record time, press menu again.”

Need the manual for your phone? You can download/print it here:

http://www.uniden.com/pdf/DXAI5588-2om.pdf

Bill B

Mar 04, 2010 | Uniden DXA15588-2 Twin Cordless Phone

1 Answer

Code to retrieve messages


Here are the instructions you need to follow:

If you want to be able to play your messages from a remote location, you need to enter a two-digit Personal Identification Number (PIN) code (01-99).
To select a PIN, perform the following steps:
1) With the phone in standby, press [menu/clock] twice.
The system announces "Security code," and the current PIN code is announced as it is displayed on the base.
Then the system announces the instructions for setting the PIN code.
2) Press [volume/select/ ] or [volume/select/ ] until the desired number appears.
3) Press [set] to select the PIN code. You hear a confirmation tone, then the announcement "Security code" followed by the new PIN code is announced. After a few seconds, the system announces "To set ring time, press menu again."
Note: The PIN code is set to "80" at the factory.

Remote Operation
When you are away from home, you can operate your answering machine with any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even record a new greeting message.
1) Call your telephone number.
2) During the greeting message, press [0] and enter your PIN code
3) The answering machine announces the current time and the number of messages stored in memory. Then you hear "To play incoming message, press zero two. For help, press one zero."
4) You may continue to listen to the voice prompts, or you may select a command from the following chart:
Command Function Command Function
[0] then [1] Repeat a Message [0] then [6] Answering Machine On
[0] then [2] Play Incoming Messages [0] then [7] Memo Record/Stop*
[0] then [3] Skip a Message [0] then [8] Greeting Message Record/Stop*
[0] then [4] Delete a Message [0] then [9] Answering Machine Off
[0] then [5] Stop Operation [1] then [0] Voice Prompts
* For Memo Record and Greeting Message Record functions, the first time you enter the corresponding command, it
starts the Recording function. If you want to stop the recording, enter the command again.
Note: Once you enter the remote access menu, you must enter a command within 15 seconds, or the
answering machine automatically hangs up and returns to standby.
5) After all of the voice prompts have been played, you hear intermittent beeps indicating that the system is in the
command waiting mode. You may enter another command at this time from the chart.
6) When you are finished, hang up to exit the system. The answering machine automatically returns to standby.

Turn on the Answering Machine Remotely
If you have forgotten to turn on your answering machine, you can turn it on remotely from any touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear intermittent beeps.
3) Press [0] and then enter your PIN code. The answering machine announces the number of messages stored in memory. You hear "To play incoming message, press zero two. For help, press one zero."
4) Press [0] then [6] to turn the answering machine On. You hear the outgoing message and a confirmation tone.
5) Hang up the phone; subsequent calls will be answered by the system.

Feb 28, 2010 | Uniden EXAI5680 Cordless Phone

1 Answer

Answering machine


Recording the Outgoing Announcement

For best results when recording, you should be about nine inches from the microphone, and eliminate as much background noise as possible.

1. Make sure the answering system is ON.

2. Press and hold the announce button on the base.

3. Begin speaking after you hear the beep.

4. Release the button when you finish your announcement.

5. Press and release the announce button to review your outgoing announcement.

Dec 01, 2007 | GE 25951EE2 Phone

2 Answers

V-tech cordless phone 5.8


How do I program a 5.8 Vtech phone?

Nov 06, 2007 | Vtech i5871 Cordless Phone

Not finding what you are looking for?
Vtech 5.8GHz Cordless Phone with Digital Answering System Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Phones Experts

kakima

Level 3 Expert

96576 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you a Vtech Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...