Question about Phones

Open Question

My phone keeps ringing when no one is calling

It was only bought 3 weeks ago and worked well although it never seems to hold a charge but lately it keeps ringing with a one ring then some times two rings when no one is calling, the fact it was bought new surley couldn't mean the re charagable batteries are cause the problem but I can't understand what is going wrong

Audioline AL 3001 digital telepone

Posted by on

6 Suggested Answers

  • 5603 Answers

SOURCE: phone will only do a 1/2 ring although it rings 3 times on caller

The number of rings BEFORE going to record is probably set too low.

If there is a kessage recorded and it is in "Toll Saver" mode that will also do it. This is a way for one to not have to pay LD charges if reading out the phone remotely. Clear ALL stored messages as well as upping the rings before answering machine.

Posted on Sep 12, 2009

  • 65 Answers

SOURCE: rings only 3 times then message

I did not see what model uniden phone you have. check here for a manual http://www.uniden.com/index/manuals_results.cfm?cat=1

Posted on Feb 17, 2008

Vit Avaya BP
  • 211 Answers

SOURCE: PHONE RINGS ONLY 3 TIMES BEFORE VOICE MAIL PICKS UP, NEED 5 RINGS

This is done on ext 10 or 11
Feature 00
Left intercom, left intercom
(for main aa)#506
Mode 1 for day, 2 for night
enter line number ex 01, 02 etc
input number of rings
Feature 00

Posted on Jun 17, 2009

cnavarro
  • 2460 Answers

SOURCE: I bought your digital cordless phones two weeks

They're not mine or FixYa's phones, they are yours.

Are you hearing dial tone before you ring out? When a phone doesn't dial or ring, it's the first sign that it's not connected to a working phone line. Try a regular phone in the same jack first.

Carl

Posted on Dec 13, 2009

issikiki
  • 563 Answers

SOURCE: Norstar M7310 phone doesn't ring and doesn't pick up calls

You can look at the manual here:
http://www.fixya.com/support/p98000-norstar_m7310_corded_phone_nt8b21ac03/manual-34096/page-3

Posted on Jan 26, 2010

consultel1
  • 856 Answers

SOURCE: Nortel T3716E send calls to voicemail HELP!

Sounds like the call forward no answer isn;t set up on your extension. The first thing to do is to find out what the voice mail pilot number is. That's done by pressing feature 982. The display should say "set:xxx". The set number provided is the voicemail pilot number. Next you'll need to enter system programming. Programming is done on 7310, 7324 and 7316 type sets. Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change call forward no answer on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the show key (top right arrow) .
The display say foward no answer.
press theshow key (top right arrow)..
The display should say none. Press the chng key and enter in the voice mail pilot number. press the show key again (top right arrow) To review the rings til forward. Press the chng key if you wish to change the ammount of rings til answered. Press the release key when finished

Posted on Jun 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Started waiting to 13, 15 or more rings before answering machine activated.


try a different machine, maybe that was why you found a used base could be defective to.
press the helpful button

Jan 26, 2016 | Phones

1 Answer

I bought your digital cordless phones two weeks ago and now we recieve no incoming calls because they do not ring although we know that they are ringing also we cannot ring out we hear the number being...


They're not mine or FixYa's phones, they are yours.

Are you hearing dial tone before you ring out? When a phone doesn't dial or ring, it's the first sign that it's not connected to a working phone line. Try a regular phone in the same jack first.

Carl

Dec 13, 2009 | Philips Phones

2 Answers

The phones worked great for about a week and then they stopped working altogether. There isn't a dial tone but the phone does ring when there is a call. We press talk and nothing happens.What went wrong...


it sounds to me like you just got a hold of some faulty units. if you have the reciept i subjest you return them or have the store you bought them from replace them. your units should work longer than a week.
the problem your speaking of is a manafacture fault.
return or have them replaced.

Nov 12, 2009 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Phone will only do a 1/2 ring although it rings 3 times on caller


The number of rings BEFORE going to record is probably set too low.

If there is a kessage recorded and it is in "Toll Saver" mode that will also do it. This is a way for one to not have to pay LD charges if reading out the phone remotely. Clear ALL stored messages as well as upping the rings before answering machine.

Sep 12, 2009 | Panasonic DECT 517 Cordless Phone

1 Answer

Battery holds a charge for a short time only


These phones are known for the contacts not transferring adequate voltage to fully charge the phone.

Oct 23, 2008 | GE 26928GE1 Cordless Phone

1 Answer

Phone rings once then makes a sound like a fax machine pick up we do not have a fax hooked up????? unable to get calls becuse phone only rings once and cuts off we bought thid uniden only 2 weeks ago...


I fixed it we are cancer patients and just bought this phone I do not feel that we should have to PAY to find out the problem Uniden I thought was a great company maybe I we wrong.We are unable to hire you for this thanks Barbara

Oct 11, 2008 | Phones

1 Answer

GE TC25951EE3 Brand new


need manual foe model tc25951ee3-a search and search and got nothing. i;m not impressed.

Jul 20, 2008 | Uniden Cordless Phone

6 Answers

2 uniden cordless phones aren't working


I always tell people NOT to buy new batteries to try and fix their cordless phone. It seems to rarely solve the problem and you are usually better off just spending the money on a new phone. Unfortunately 5 years is a long time for cordless phones these days. There are so many brands, and so many thousands of models, it's impossible to keep track of them all.

Jul 04, 2007 | Uniden Cordless Phone

3 Answers

Phone not working


You may need to re-register the phones. Below is a link to the owners manual in case you don't have one. Good luck. http://157.254.235.130/public/IB27996DOME0.pdf

Jun 13, 2007 | GE 27996 Twin Cordless Phone

1 Answer

Problem when dialing phone


Yes, I have had nothing but trouble with my V-Tech ia5823.
Slow to dial, dropping out going calls and now the base light is flashing at a rapid pace and will not charge the handset.
I want to return it to Wal-Mart but have misplaced the recepit.
I will never buy another V-Tech..Uniden is the way to go!

Jun 02, 2007 | Vtech ia5823 Cordless Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96683 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...