Question about Canon PIXMA MP600 all-In-One InkJet Printer

1 Answer

Canon mp600r paper jams every time a second page is printed

This printer worked fine for a while, but now cannot print more than one page at a time without the second sheet jamming a quarter of the way out of the machine. once you clear the paper it is still difficult to clear the error on the screen and continue, it thinks the paper is still there...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

Jo48,

You have a faulty sensor in your print mechinism. This could be the print mechinism itself or the sensor. Either way it wil require the unit to be stripped down and repaired by a qualified canon service tech due to the need to re align certian rollers and gears in the unit. Only a canon service tech can do this properly. Sorry dude, but them is the facts.

If the unit is under warranty, canon will repair it for nothing, however if it isn't, you might consider the difference between the cost of the repair and the cost of a replacement unit.

Gremlin11

Posted on Dec 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Canon MP600R. It has stopped printing and shows error code 6000 and started off flashing orange, now it's flashing alternate orange and green and the print cartridges have no lights.


I had this same problem. I called cannon and they advised me that the machine was not fixable and offered me a new one for a cheaper price than most stores. Hope this helps.

Dec 09, 2014 | Canon PIXMA MP600R All-In-One InkJet...

2 Answers

Canon pixma mp287


Canon pixma keeps jamming

Dec 20, 2013 | Office Equipment & Supplies

1 Answer

Constant Paper Jam


check the wheels that pick it from the tray.
If they feel smooth, try to put some tape on them and rip it back off.
This cleans the wheels. Also try a new pack of paper and check if it\'s set to plain paper and not to heavier or coated paper

May 30, 2013 | Brother MFC-7840W Multifunction Laser...

1 Answer

Canon mx410 paper jam error


For me on my Cannon MX410 with a "paper Jam" light displayed this WORKED!! The absolute BIZZARE thing was after I went and through the described procedure above and rebooted and tried to print the 1st page that came out had a "crushed" ****-roach on the 1st page! So I didn't have a paper jam,...but a
ROACH Jam. :) I told my wife, Humm pest service not workin I guess! It errored out again, but simply unpluggingUSB and power cord (not the steps described for the Print Spooler) it prints fine. SO saved me buying a new printer which was just 6 mos. OLD and FINE by me! So THX, Vikram Kumar Thumu!

Jan 28, 2012 | Canon Pixma MX410 All-In-One Printer

1 Answer

Error code 6A00 on Canon MP600R printer


OK here is the codes
Error 6A00
The 6A00 is a Canon generic code for paper path jam.

Solution 1:
Move the printhead carriage back and forth a few times.

Solution 2:
Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.

Solution 3:
Press the ink pads down in the purge unit.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Oct 20, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Paper Jam


I would get a can of compressed air and completely spray out the printer. Most likely there is a bit of torn paper somewhere that needs to be pulled out. Or unplug the printer completely and let the power completely dissipate and then plug it back in. Let me know if you have any further problems.

Jun 09, 2009 | Canon PIXMA MP600R All-In-One InkJet...

1 Answer

Paper Jam


try a test page..and see if that flows..




Aug 20, 2008 | HP LaserJet 2100 Printer

Not finding what you are looking for?
Canon PIXMA MP600 all-In-One InkJet Printer Logo

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1814 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...