Question about Office Equipment & Supplies

Open Question

Hp color laserjet 2500n. I turned the printer on yesterday, first time in 8 months.  The documents came out poorly full stripe on left of each page missing. I looked on line and determined that i needed a new print drum. Ran to Re-cycle store this am. Got a re-cycled Drum Cartridge. Now nothing works.  No print jobs accepted?

Posted by on

  • Anonymous Jan 14, 2009

    Any lights flashing? in particular the drum error light (amber in color)?

×

5 Suggested Answers

  • 30 Answers

SOURCE: HP LaserJet 1020 Prints a Black Line when at the right side when using Ms Word 2007

First, you need to try update the latest microsoft office patch file from microsoft or you can open the MS Word, go to "HELP" menu select the update MS Word or related. Try the latest patch file first. You also can try windows update and select custom update, see their list have this problem solution or not. Second, you need to go to HP website download latest driver for LJ1020 and suitable use on Vista. Lastly, if still not solve the problem, you need this problem/issue to microsoft, ask their solutions. Kent

Posted on Aug 23, 2007

SOURCE: Drum is near end

some packaging is still on drum probally.
check that out and to clear message u need to open all the front covers then hit the clear/back button and then hit number 1 and your set

Posted on Apr 09, 2008

  • 1 Answer

SOURCE: HP Laserjet 1020 - prints blank documents

in my printer the resistor R348 on the motherboard printer was broken. The value that must have is 10 ohms. I have changed and the printer has resumed work.

9153e48.jpg

Posted on Dec 07, 2008

57 varieties
  • 1653 Answers

SOURCE: HP Laserjet P1006 prints with blank white stripe down left side

Clean the Corona Wire carefully to remove any residue. As the charge on the wire is effectivley masked it cannot deposit any toner to the page and will result in a consistent white vertical stripe.

Posted on Aug 29, 2009

komguy
  • 2306 Answers

SOURCE: HP Color LaserJet 2840 keeps showing 50.2 Fuser

The fuser is the heating unit near the paper exit, and that error means the lamp is burned out, the overtemp sensor is out, or the thermistor in the fuser is bad. About all you can do is replace the fuser. www.precisionroller.com will have a new fuser for you.

Posted on Jan 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the 2550n printer not printing fully in the left column


Is the print quality poor on left side for all colors? You may have one bad cartridge. Create a paint document with Yellow, Magenta and Cyan squares on the left side and see if one color prints better than the others. You can also gently shake the cartridges to redistribute toner.

Sep 08, 2014 | HP Color LaserJet 2550n printer + HP Color...

1 Answer

Black stripe when printing from hp laserjet 2840


Cartridge faulty...
Two ways you can find out the faulty cartridge.
1. Remove each cartridge, just flip the drum shutter & chk for any toner bands appears on drum surface.. if found replace that cartridge..
2. Go to the paint. create four colored page as shown, print & verify which colored print mixed with bads.. replace that cartrdige.. ">

Mar 01, 2014 | HP LaserJet 2840 All-In-One Printer

2 Answers

Do the reset chips really work on the cartridges of HP 2500N laserjet printer


Yes, reset chips really work on laser printer cartridges, if you have a know good source for the chips and if you know what your doing, you can't put a new chip on an old cartridge, the chip is what registeres how may prints you will get out of the cartridge if you put a new chip on an old or 1/2 empty cartridge of course it will say it's full but then try and print.It will register as a full cartridge but it can only print with the amount of toner that is actually left in the cartridge, be careful there are alot of remanufactures out there that don't put new chips on or that do but don't fill the cartridge full, or replace all the wipers and drums, they just dump some toner in and say here you go, Only buy your remanufactured cartridges from a reputable company, do your research on them first or you'll be sorry

Aug 14, 2010 | HP LaserJet 2500N Printer

1 Answer

How do i clean the print heads on my HP Laserjet 2500 on my Mac 10.5?


There should be a print utility tab when you bring up your printer to print a document. Click on it and then there should be a nozzle check option.

Dec 31, 2009 | HP LaserJet 2500N Printer

1 Answer

HP Laserjet P1006 prints with blank white stripe down left side


Clean the Corona Wire carefully to remove any residue. As the charge on the wire is effectivley masked it cannot deposit any toner to the page and will result in a consistent white vertical stripe.

Aug 29, 2009 | HP LaserJet 1022 Printer

1 Answer

Jet direct card setting


Use the HPJetDirect software to configure printer. I uploaded it here:

http://wikisend.com/download/458082/HPJetDirectDiscoveryTool inpw_enww.exe

Click the BIG GREEN DOWNLOAD button. If the software cannot find the printer, try connecting printer network cable directly to computer.

Jun 17, 2009 | HP LaserJet 2500N Printer

8 Answers

HP Color Laserjet 2600n Color Alignment


I own a HP 2600n and I had the same problem the way I fixed it was hold both arrow buttons in the turned off the power for 10 seconds while holding the buttons in then turned it back on then released after 3seconds the reset my defaults this cured my problems

Oct 07, 2007 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...