Question about Wacom Intuos2 4 x 5 USB (INTOUS)

4 Answers

Wacom Tablet...PEN not WORKING!!!!

The Pen on my tablet moves around and lloks like it's working, but when you push, you can't click on anything. A friend took it to their house and it works fine. Something is up with MY set-up. Working on an I-MAC! HELP!!!

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
Re: Wacom Tablet...PEN not WORKING!!!!

To make the 1st solution even easier, disconnect the tablet from the usb port, lay the pen flat on the tablet surface and plug the tablet back in. Worked like a charm for me.

Posted on Aug 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Wacom Tablet...PEN not WORKING!!!!

I have a classic pen and it is not working, can any one help.

Posted on Feb 13, 2013

Re: Wacom Tablet...PEN not WORKING!!!!

Go into the system preferences. mine shows up under other. click the tablet icon. go in and under tool erase the existing mouse and pen tool. then put each item on the tablet pad so it will recognize them. They should then reload into the tools section and be reset to the original settings.

Posted on Sep 14, 2008

Re: Wacom Tablet...PEN not WORKING!!!!

Try activating mouse keys [where you use the number pad to move the mouse] and then hitting 5 (on the number pad.)

Posted on Apr 24, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Intuos 4 pen clicking while hovering

You may have an issue with the drivers. If you're using the drivers on the CD, try updating to the latest drivers:

If you're using the latest drivers and the issue persists, try rolling back your drivers to the previous release:

Feb 16, 2013 | Wacom Intuos 4 (PTK1240) Graphic Tablet

1 Answer

My bamboo pen wont move my arrow around anymore

I've had this issue; the software drivers that make your tablet work aren't installed. Go to Wacom's site (I've provided a link) to download the software for your tablet.

Jul 13, 2010 | Graphics Tablets

1 Answer

My Wacom Tablet won't recognize the pen.

you have to install the pen on the CD you have from the box you got it in

Apr 21, 2010 | Wacom Intuos3 Graphic Tablet

1 Answer

Graphire4 pen registers without touching pad

It's meant to. So you can move around the page without selcting anything.

Mar 31, 2010 | Wacom Graphire4 4x5

1 Answer

My wacom pen does not work at all, the mouse on the tablet does though

on some older pens, the barrel can spin out of position. If your barrel turns, it can mess up it's function.

Turn the barrel until you hear or feel a clicking into position and try again.

If that doesn't work, move wacom cable to a different usb port. worse case, replace pen.

Mar 14, 2010 | Wacom Intuos3 Graphic Tablet

2 Answers

My Bamboo Fun Tablet pen/stylus is not working. The tablet registers that the pen is there, the light turns orange, but the mouse will not move, for either the pen or eraser side. It will move for my...

That happened to me yesterday. What I did was I went to the wacom site here:, selected my tablet make and operating system, and downloaded the driver update. I installed it and as soon as it was done my pen started working again. Hopefully this works for you too!

Mar 02, 2010 | Wacom Bamboo Fun 8.5" x 5.3" USB Tablet...

2 Answers

Wacom tablet clicking noise!!!!!

ok... so i've just been fiddling around with my wacom settings... and i noticed that while i didn't see any sound options when i go to the wacom tablet settings through the windows control panel, i do have them in the pen office program... i had the sound box ticked, so i just unticked it...

Feb 09, 2009 | Wacom Graphire 4 "Silver" 4x5 (WMM132369)

1 Answer

Wacom tablet won't recognize pen

Hmm. I've had a similar thing happen with my tablet. Have you tried removing the tablet pen from the list of tools in tablet preferences and then adding it to the list again before checking the 'About' section of the tablet pen set-up and clicking the 'diagnose' button there in? As that worked for me when my tablet pen was not working. The pen was recognized by the tablet after that. 

Aug 20, 2008 | Wacom Intuos3 Graphic Tablet

10 Answers

Wacom Tablet overly sensitive

i had the exact same problems with my graphire4 pen.
take a tool to remove the tip of the pen. just blow inside the pen, put the tip back and press it in back but not too hard. works like magic!

Aug 03, 2008 | Wacom (PTZ930AC) Graphic Tablet

11 Answers

Initial Delay of tablet pen

I had a similar problem with Vista which made the pen/cursor freeze just as the tip was placed on the tablet face.
The problem turned out to be a Vista setting.
I went to Start > Control Panel > Pen and Input Devices.
Then in the Pen Options tab highlight the "Press and Hold" pen action and then press the "Settings..." button. In the dialog box that opens uncheck the "Enable press and hold for right-clicking" check box. Hit "OK".
Worked for me.

Feb 02, 2008 | Wacom Intuos3 Graphic Tablet

Not finding what you are looking for?
Graphics Tablets Logo

13,013 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wacom Graphics Tablets Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers


Level 3 Expert

2236 Answers

Barrett Palumbo
Barrett Palumbo

Level 2 Expert

1772 Answers

Are you a Wacom Graphics Tablet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides