Question about Xerox WorkCentre Pro 635 Laser Printer

1 Answer

Xerox Workcentre PRO 635, 645,657 Memory Error

I have Xerox workcentre Pro 635, 645, 657 Model FAX machine. It has an error message which is 'Memory Error' "Press STOP' and Check Phonebook. I was trying to get fax from some one it got this message. I put off the machine still this error never cleared. I tried so many things Still I have the error. I was able to send out FAX's from this machine. But I didn't have the chance to receive any fax info from outside. Could you please answer this question?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Xerox Workcentre PRO 635, 645,657 Memory Error - Xerox WorkCentre Pro 635 Laser Printer Printers & Copiers

Error #22

Posted on Nov 01, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I am using xerox work center pro428 .now it is not working error message showing code U8-3

Hi, I can't find that specific error code in the documentation on that model of machine, however, in general in Xerox machines U8-3 means that your exposure lamp is blown or has a problem

Aug 19, 2011 | Xerox WorkCentre Pro 428 Copier

1 Answer

Error 116-364

Error 116-364 Problem with the Xerox WorkCentre Pro 123/128 Copier Finisher Staple Refills Copier. Dear i am also facing the same problem, It would be very helpful if you share the solution you may had come across. Thank you very much .

May 17, 2010 | Xerox WorkCentre Pro 123/128 Copier...

1 Answer

Xerox workcentre pro 40-communication problem encountered

Some connection is lose. One of the connectors to the main board may be loose. The communication it is taling about is the machine devices are not talking to the main board.
If you just purchased it you can call Xerox and they will send someone free of charge to fix it.
The number is 1-800-821-2797.
Does there happen to be a code coming up with the message? like an 03-888 ot 05-222?

Mar 03, 2010 | Xerox WorkCentre Pro 40 All-In-One Laser...

1 Answer

H2 Blinking on the panel

Error code means that:
H2 Thermistor Open

Part #
Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F, Xerox XC1020, Xerox XC1040, Xerox XC820

Mfr Part #: RDTCT0128FCZZ

Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F

Mfr Part #: CTHM-0019DS52, CTHM-0019FC52

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Feb 21, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

Unimessage pro driver error

try reseting the nvram. if no luck after that try changing the image control board.. with another one if it's avaliable.(maybe you have another machine around. If not then conect your printer to the network reset the printer so you can get an ip address.. usually it's a 192.168.*.* Then type that ip address 192.168.*.* into the top of your web address bar and you should be able to see you printer. If not i would change the image control board because it might be bad.

Feb 10, 2009 | Xerox WorkCentre Pro 416 All-In-One Laser...

1 Answer


Hello sir; The U-9 code means the main control unit/switch board problem, replace it.

Feb 07, 2009 | Xerox WorkCentre Pro 423 Copier

1 Answer

I have Xerox workcentre pro 128 copier machine. can you solve my problem? when i copy before appear this Error code 123-396.

That is a software related error, You most likely need to reload the firmware, or replace the hard drive.
You can try disconnecting all the document feed and scanner cables then reseating them. Other than that, your looking at a software issue.

Jan 28, 2009 | Xerox WorkCentre PRO 128 Copier

1 Answer

J3 error On Xerox WorkCentre Pro - 215

A J3 means the toner cartridge is not compatible. That is the what the J3 message means.
Make sure the correct cartridge has been installed. For example, a Pro16 Toner Cartridge looks very similar and will fit in the machine, but it will display a J3 fault. Install a known correct Toner Cartridge if you suspect the cartridge in the machine is the problem. If the wrong Toner Cartridge has been used, the correct cartridge needs to be ordered and installed in the machine
It is possible the chip on the back of the cartridge is bad. Have you tried reseating the cartridge? Maybe it is just loose.

Dec 19, 2008 | Xerox WorkCentre PRO-215 All-In-One Laser...

2 Answers

Xerox WC Pro 35 - Error 14-563

this code means your scanner has failed to setup correctly. this could be a problem that you would need a qualified tech to service the copier. there is nothing that you can do after you power off and power on (popo) the copier. it could be voltage, pwb board, or a binding scanner assembly.

Sep 21, 2008 | Xerox WorkCentre M118 Black and White...

Not finding what you are looking for?
Xerox WorkCentre Pro 635 Laser Printer Logo

Related Topics:

533 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts


Level 1 Expert

185 Answers


Level 2 Expert

110 Answers

Patrick Carmichael...
Patrick Carmichael...

Level 2 Expert

107 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides