Tv and dvd remote controls interfere with each other

Some brand name of the DVD player.Some brand name DVD player,u must used it own DVD player remote to turn on the volume higer or lower to get it up or lower on the movie DVD discs or any kind of DVD discs are playing.The tv dosen't control the output volume of the movie,if the function require the DVD player remote to do it.Check ur DVD player remote see if u have a volume control buttons + - used those buttons on the DVD remote control u will control the volume of the movie DVD disc it is playing on the DVD player.

if you find it hard to obtain similar remote control, try using a universal remote control that able to control tv, dvd, set up cable box.

U can't not tune tv and DVD player together.Each have own signal frequencies.Try website like Remotes.com to buy an original or very close to the original remote.

check to make sure it is proper format,. if it is burnt disc, dvd player may not recognize format. if all regular dvds do not play, it is problem with player, use head cleaner for lense, if that does not work, purchase new player. without more info, all i can suggest is basics

.avi format it supports

Try placing the dvd-player as far as you can away from the TV. It may be creating EMI (electro-magnetic interference). Ensure that the wires from the DVD-to-TV are not positioned close to other electronic devices -try moving them.

You say the TV works fine on its own, so that is good; there is probably no big magnet or speaker near the TV.

If it is not anything external causing interference, then yes, your DVD player is probably malfunctioning. Try borrowing a friends..

http://www.findremotes.com/remote-controls-1/goodmans-remote-controls-gce67w5dvdk-28665.htm
Hope this helps, if so please rate accordingly David

You need to bypass your A/V tuner for your video connections (if possible). Plug your video directly into the TV and audio into the tuner. This will also give you a cleaner signal/picture as it does not have to processed by your tuner BEFORE it goes to your tv. Think of it as cutting out the middle man. Your tuner is best left for powering your speaker and not controlling your video despite all of the available connections in the back of it.

I would also get rid of your VHS and cassette players as they are dead technology. Clean up your system and remove the clutter. This will lessen your chance of getting interference. Good luck!!

Usually with DVD players, picture & no sound, or sound & no picture is caused by the scart lead not being plugged in properly.


Sound pins are at one end of the connector and audio pins at the other.

If you are using scart make sure that the plugs at both ends are pushed in all the way. The plastic part of the plug should just touch the socket.

If you are using S-Video (Round connector with 4 pins) you also need to connect a twin phono-phono (Red & Black or White) lead to carry the audio, as S-Video only carries video.

Once you have connected your dvd player to your tv and the tv is turned on. Turn on the machine and press "disc" on the remote control. Open/Eject the disc tray. Press STOP on the remote control. Enter the following numbers slowly on the remote control " 7,3,4,4,6,6,0". Configuration will appear on the bottom left hand side of the TV for three seconds. Press "PLAY" to close the tray. The DVD player eill return to normal operation. This SHOULD make the player Region free.