Question about NEC Dterm DTP 16D-1 Corded Phone

1 Answer

NEC Dterm 80 LCD display is defective, where do I get parts? How difficult is it to change?

Posted by on

  • Anonymous Feb 11, 2009

    I have 45 defective LCD's on an Aspire system two years old. NEC says no support. NEVER buy from NEC they won't support their failures.

  • Anonymous Mar 27, 2014

    change language on display from Spanish to English NEC dterm 80

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

The common thing on this style of phone is the silver ribbon cable that connects the display to the main circuit board comes loose after being dropped or knocked around and needs to be reinserted. You will need to open up the phone to do this. If this is not the solution then you will either need to purchase a used phone, send it in for repair or use another phone to take parts from.

Posted on Dec 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nec dterm 80


Sometimes panel stops working when internal ribbon cable comes loose. If you feel lucky, unplug the phone, take off the base, take off the back cover, re-attatch, re-assemble.

Jan 23, 2014 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

How to change name on nec dterm 80


You need to do this from the Admin phones, by default the lowest ext #'s on the system.
This is system programming not the phone itself.
Refer to the Attendant guide for the phone system model your phones run on.

Nov 01, 2012 | NEC Dterm 80 Phone Dth-8d-1 bk Tel 780571...

1 Answer

Need change the time on my nec phone d term 80


To reset time NEC Dterm 80
Press speaker and enter 728 on keypad.
Then enter correct time in 24 hour format...Ex. 2:56 = 1456
Then press speaker again...
Note: On my system this changes time on all phones on the system

Dec 15, 2010 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

Our phone is a NEC DTerm 80, but looks a lot like ...


The Display can be swapped.... if you can find one.
Otherwise no programming is retained in the telephone. Swapping phones will not loose any data programed to that jack/Extension number

May 21, 2010 | NEC DTH-8D-1 Corded Phone

1 Answer

How do you change stations names on a NEC Dterm 80?


ANDD if it's a NEC IPX 2400 or SV8500. PBX administrator will have to change it.

Mar 18, 2010 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

LCD display backlighting


If there are up and down arrows on the phone you should be able to press them when the phone is not picked up to change the LCD.

Jul 31, 2008 | NEC Dterm DTP 16D-1 Corded Phone

4 Answers

NEC Dterm 80 calls won't go to voice mail


for us i just found this out.

1.Fwd B/NA
2.1 - 1:set-0:cancel
4.200
5.speaker
after 4 rings it goes to voicemail
this works for us.
i hope it works for others too.

turn this feature off
1.hit fwd b/na
2.0:cancel
3.exit
4.exit
should see the normal display then.

Jul 17, 2008 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

NEC DTerm 80


Try dialing the numbers 725 and then hang up...to turn it off..same thing. Ours works this way at work.

Apr 02, 2008 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

NEC Dterm 80 / change contrast on display panel


Use the up/down arrows on the bottom right. Though you may think they are volume, it actually is for contrast when the phone is on-hook.

Apr 01, 2008 | NEC Lands Phones

6 Answers

NEC Dterm 80


NEC Dterm 80 phone, 1 ext. is blinking and we can't get it to turn off. It shows a busy signal when you try to call it.
Help it is the owners phone!!!

Sep 29, 2007 | NEC Dterm DTP 16D-1 Corded Phone

Not finding what you are looking for?
NEC Dterm DTP 16D-1 Corded Phone Logo

Related Topics:

2,190 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

Brian LaDuca

Level 2 Expert

149 Answers

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...