Question about Whirlpool GR465LXLS Electric Kitchen Range

3 Answers

Whirlpool gold range E1 F5 now says LOC in display

I unplugged the oven and plugged it back in. I now have loc in the display instead of E1 F5
I can use the stove top but it will not let me punch in an oven button.. this display is just locked up on loc. I feel like it is something to do with the oven lock and cleaning. What do I do. I can't afford a repairman at this time. Can someone tell me what to do. I can follow instructions.

Posted by on

  • Anonymous Mar 16, 2014

    Loc and padlock display won't go off after oven has been cleaned


3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

Try sething the oven for cleaning for about 3 hours.

Posted on Dec 08, 2008


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hold the lock button for 5 seonds. if that doesn't help then i dont know the problem. hope this helps.

Posted on Dec 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cannot get my oven to self clean, I get the E1 F5 code on the
range. I would like to have instructions on how to clean my

Posted on Dec 30, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Whirlpool Gold Accubake Range

try holding down the start button for 3 seconds

Jul 31, 2009 | Whirlpool GR460 Electric Kitchen Range

1 Answer

The display shows "Loc" and the oven will not work. It earlier displayed E1 F5 and the door would not unlock. I unplugged the stove and plugged it back in, and the door openned. Now it displays "Loc" and...

sounds like the control panel may be locked, look for an icon that looks like a small padlock, push and hold it until the loc goes away, it says 3 seconds but 5-8 is more realistic. I hope this hepls

Apr 12, 2009 | Whirlpool Accubake SF362LXTS Kitchen Range

1 Answer

E1 F5 displays cannot use the oven whirlpool gold range When I triy to bake it doesnt let me it beeps twice an didsplay E1 F5, I pushed all cancel button on the range to no avail

The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.!!!

Feb 25, 2009 | Whirlpool GR773LXSS - Stainless Steel...

1 Answer

Display reads "Loc" and a lock icon is lit-up.

Ok unplug for an hour then plug back in and it shoul be reset !

Jan 25, 2009 | Whirlpool GR399LXHS Electric Kitchen Range

3 Answers

Whirlpool stove Super Capacity 465 problem

Hi dcisco,
Happy to help you!

I would advise you on this occasion to call service.

These guys are good!
A&E factory service does most brands warranty services.
They are open 7days/24hours nation wide.
call tonight! 1-800-905-9505

I am happy to assist you!
PS. Before you leave this site please leave a "Problem Solved" rating for me on

Aug 23, 2008 | Whirlpool GS460 Gas Kitchen Range

1 Answer


F1 E1 N/A EEPROM checksum error Replace control no code posted for e2 f2

Mar 04, 2008 | Kitchen Ranges

1 Answer

Display says LOC,

I have a whirlpool range and I'm trying to get my display off of lock. I reset timer wrong and now nothing works.

Feb 03, 2008 | Kitchen Ranges

2 Answers

Whirlpool Electric range model RF386

cant nfind euf5 code can find eo f5 its a door loc code saing the door and latch switches do not agree try pushing stop/cancel and try again also does the oven light go off and on when you open and close the door

Dec 31, 2007 | Whirlpool RF364 Electric Kitchen Range

Not finding what you are looking for?
Whirlpool GR465LXLS Electric Kitchen Range Logo

1,379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

4801 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides