Question about Maytag Neptune MDE5500AY Electric Dryer

3 Answers

Model MDE5500AYW Maytag Neptune Dryer showing code 8.8 and won's start

Where can I get a new control panel or console board. I'm not sure what the difference is between the two, but I do have the computer circuit board removed from the dryer and was wondering how I can order a new one and what the cost would be?

Posted by on

  • nappiecleo Jan 02, 2009

    I thought I already reported my problem as fixed. I ended up purchasing a new control panel from Marcone in St. Louis, MO for about $125.00 and it has a lifetime warranty on it. My dryer is working great and even on the extremely cold days we have had like 7 degrees.

    It would have been interesting to try the heating pad idea, but I already replace the part. I did try a blow dryer on hot for 5 min without getting any success.

    Thanks for the ideas anyway :)




  • Anonymous Mar 17, 2014

    The rows of lights are flashing row by row and then they start over again, Not sure what is going on. Dryer won't start either. Is there a way to reset the computer?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found one under repairclinic.com I think it was around 169.00

Posted on Dec 11, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 324 Answers

The circuit in the control. you can get it at
http://www.apwagner.com/index.php?main_page=part_finder
I hope this helps.

Posted on Dec 08, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Look at this link... it worked for me!!! Basically,
1) Use a heating pad and warm the display.
2) Open the dryer door as well to let the warm air in.

It took about 15 min for me and saved me a over $100 in repair costs.

http://mikemerrittmotors.yuku.com/topic/796/t/Maytag-Neptune-Dryer-Lights-up-8-8-Wont-work.html

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MDE5500AYW Maytag Neptune not heating. Heating Element, both high limit thermostats and thermal fuse have been replaced. What could be the problem?


Firstly, you have not mentioned that you have verified the presence of a power source of 240 volts, so make certain of that issue. If you have proper voltage, then the motor centrifugal switch could be at fault
Below is a link for trouble shooting your model.
http://www.repairclinic.com/RepairHelp/How-To-Fix-A-Dryer/8-4-563862-/Maytag-Dryer-not-heating-MDE5500AYW?r=%2fShop-For-Parts%2fa8b4d563862%2fModel-MDE5500AYW-Maytag-Dryer-Parts

Sep 28, 2016 | Maytag Dryers

1 Answer

Maytag dyer problems


it sounds like the control board is going bad but i wouldn't buy any parts for this dryer,soon you won't be able to get parts for it,put the money into a new dryer not to mention that the neptune products is what took maytag out and now whirlpool owns maytag.you could also have a problem with one of the connections or a bad wire in one of the connections and when you move the wires it's working again and this could be from the heat,after years the wires get brittle,you could buy the new board,put it in and if it's a wire you're back to square one,but from what you say it's either a wire in one of the connections or the board.good luck with your dryer.

Nov 12, 2013 | Maytag MDE5500AYW Electric Dryer

1 Answer

Magtag Neptune Dryer - when I press start it say Pause and stops instantaneously. Anyone have this problem and know the solution?


sounds like a bad control board it seems like you have a letter missing in your model number ...I looked up the part ouch ..http://www.repairclinic.com/vwo1/Maytag-Dryer-Model-MDE5500AYW-ID-563862-Circuit-Board-Timer-Parts?s=t-mde550ay-%3d%3dd563862b4a8c13

Aug 14, 2013 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

We installed a new control board on a maytag neptune dryer MDE5500ayw. everything is installed correctly but the dryer will not start. The lights are on and there is no fault showing. How do we reset the...


are you positive it was the board and not something else wrong?check to see if you have power to the motor with a meter,if you do you have a bad motor,also check the thermal fuse.you need to get in there with a meter and check things out

Aug 20, 2010 | Maytag Neptune MDG5500AW Gas Dryer

1 Answer

Maytag Neptune MDE5500AYW panel lights work but not dryer


inside the control panel is a tech sheet that has some diagnostics on it . there is a membrane button test or something to that effect. I suspect that the start/pause button is the problem and you would need to replace the console w/touchpad.about $130-140 new. there are some used ones on ebay.

May 20, 2010 | Maytag Neptune MDE5500AY Electric Dryer

2 Answers

My Maytag dryer model number MDE5500AYW has lights on, but won't switch settings. It is stuck in time dry at 18 minutes. Yesterday it was on sensor dry 47 minutes. Do I need a new control board inside...


OK, your control board and LED are integrated, so you will need to just replace the control board. I would try a hard reset before replacing the board. Pull the plug or, shut down the appropriate breaker switch for 5 minutes. Re apply power after the 5 minutes are up. if you continue to experience this fault, replace the control board asap.

CONTROL PANEL(CLICK HERE TO ORDER)

Aug 28, 2009 | Maytag Neptune MDG5500AW Gas Dryer

2 Answers

My maytag will not run


My neptune dryer electric mde5500ayw will not start the button seemed too be struck, and how can i take the side panel off to check the fuses inside

Nov 20, 2008 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

Maytag Neptune Gas Dryer "do" code


sonds as if you have abad door switch assy, uint not reconozing the door closed

Oct 29, 2008 | Maytag Neptune MDE5500AY Electric Dryer

Not finding what you are looking for?
Maytag Neptune MDE5500AY Electric Dryer Logo

Related Topics:

920 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3072 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...