Question about Samsung ML2250 Laser Printer

2 Answers

On Line / Error Red light comes on.

I cut unit off, several times, cut back on. Red light still comes on when trying to print Windows article. This is first time in 25 months this has happened. All connections are tight, I rebooted my PC, problem persists. Many thanks for any help you can give me.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 399 Answers

Just.remove all the connections.then reinsert it properly.then remove the cartridge and reinsert it.then also check out any paper blocking the gears.then reload the printer drivers again and it will work with no problem.

Posted on Dec 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 599 Answers

Recheck connections and shut windows down completely for 5 minutes before rebooting.... then if it still doesnt see it.. go to samsung site and download latest drivers and uninstall/reinstall with new...good luck

Posted on Dec 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2 lights flashing


What is the flash pattern?

If the red paper light and the red ink light are blinking in an alternating pattern, then you may have a foreign object or piece of paper blocking the movement of the print head. Turn off the printer, open the printer and look for anything in the printhead path. Remove anything that doesn't belong. Some printers have a strip that the print head travels across that can sometimes come out of position. This can be repositioned by moving it up and down as well as forward and back to align in a guide on the back of the print head.

After clearing the obstruction, close the printer and turn it back on. If the error persists, then the unit needs service.

If the red paper light and the red ink light are blinking together and the green power light is off, then the printer has an internal error. Turn it off and then back on. If the error persists, the unit needs service.

One internal error could be the waste ink absorber is full. These pads are below the printhead and absorb ink during cleaning cycles. To reach them is messy and takes disassembling the printer from the top. This may include removing the print head. Pull the pads, blot the ink off them and the places where they fit in the printer. Run clean water over the pads until the water remains clear. Dry the pads (use a hair dryer to speed the process). Then reassemble the printer.

Next navigate to http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp and fill in the model and serial number of the printer (as well as the other required information). You will get a link to download a reset utility for Windows. Run this tool to solve the error. Do not run this utility until the pads are replaced or cleaned; waste ink will get everywhere inside the printer and over your documents.

I hope this helps.

Cindy Wells

Nov 19, 2010 | Epson Stylus C86 InkJet Printer

1 Answer

I am trying to print but small window comes up saying -Service Error 51000 cancel printing then turn the printer off and then back on. I do this several times but it is still not printing . Help


5100 is a carriage error, check the timing strip for contamination(plastic strip about 1/4" in width)
The unit is not homing, check for obstructions.

Nov 25, 2008 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Cannot Install it Successfully


Restart you computer. Turn your printer off, wait 20 seconds and turn it back on again. Load up software you use to talk to the printer.

What interface are you using to connect to the printer?

Jul 17, 2008 | Star Micronics TSP400 Label Printer

3 Answers

TLP 2844 won't print barcodes


The printer is in line mode. Do the following to take it out of line mode:
Turn printer power off.
Hold the feed button while turning printer power on.
When the light starts flashing, release the feed button.
When the light starts flashing again, press and hold the feed button.
When the light turns steady amber, release the feed button.
When the light turns steady green, the mode is changed.
Verify the mode by printing and inspecting a status report.

This requires good timing and may take several tries. You'll know it worked if no labels are reeled out after you're done.

Apr 10, 2008 | Zebra LP 2844 Thermal Printer

2 Answers

Error LED blinking after paper jam, won't print


I have a similar but different model B4300. Several others, & I have found that a small piece of paper 1/2 square may lodge under a plastic guide, holding open a switch. This is very difficult to notice if you don't know where to look.
Open top lid
Remove the ink cartridge/roller drum as a single unit.
Look in the printer at the metal roller in front.
A Plastic strip on top & in front of the roller covers 2 square holes which should look dark. On your LEFT, as you face the unit, there is a small magnetic switch, to the LEFT of the LEFT square hole, under the plastic.
In my case, the paper was seen as white in the hole, and extended under the switch. I was able to grasp it with a small medical forceps, next to the switch. By gently twisting, I pulled it out without taking the unit apart.
The printer then worked perfectly after the paper under the switch was removed.

Dec 13, 2007 | OKI B4100 Laser Printer

2 Answers

Print head jam


Iv'e seen these problems a 100000000 times with this printer and I found a little article you may wanna read before going farther with this machine!!!! Go to http://.i18nguy.com

Apr 19, 2006 | Epson Stylus C80 InkJet Printer

Not finding what you are looking for?
Samsung ML2250 Laser Printer Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...