Statistics settings in my calculator

I would like you to help me to set my calculator to process statistical problems considering the only one variable. Please show me the steps I have to follow clearly. Thank you

Posted by on

SOURCE: user's manual

http://www.amazon.com/Sharp-EL-531VB-Calculator/dp/B00005IX7Y

Posted on Mar 18, 2008

SOURCE: statistic calculation

Hello,
Here it is

Posted on Sep 17, 2009

Press [2ndF][MODE][1] to select single variable statistics.

1. Enter a value and press [DATA]
2. or enter value, press [X,Y]key, enter the frequency then press [DATA
When finished you can access the mean (xbar an X with a small horizontal bar like a minus sign on top of it.)

The xbar may be a key accessed directly if xbar symbol is on top of the key, or a [2ndF] key if xbar is written on the body of the calculator.

Posted on Feb 03, 2010

0 characters

×

my-video-file.mp4

×

1 Points

Related Questions:

How to solve r in linear regretion

Find the formula for the correlation coefficient and use the calculator to calculate it.
You can also use the calculator to do statistics. It has some keys to retrieve the statistical values calculated. You will find r among them.

Dec 19, 2012 | Casio FX82ES Scientific Calculator

How can I reset my Casio FX-115 ES calculator to its default settings

There must be an error in what you report. You pressed MODE then 4: Base-N and now your calculator is in base-N calculation mode (the DEC, Hex, BIN, OCT) numeration keys are active.
To do statistics you must put the calculator in STATS mode.
Press MODE: You have 6 computational modes to choose from
1: COMP, the general computational mode
2:CMPLX, for calculation s with complex numbers,
3: STAT for statistics,
4: Base-N, binary, octal, decimal, and hexadecimal numeration
5: Equation, solving mode, etc..
For statistics, choose 3:STAT

Apr 24, 2012 | Casio FX-115ES Scientific Calculator

How do you find the standard deviation using the list function when you place values in two lists? (Casio fx-9750GII)

It depends what the two list mean.
If you are doing 1-var statistics you may want to enter the frequency of a data element (if some are repeated) in the list L2.
In that case when you run the CALC 1-Var , you first press the F6 key to set the lists Data List1, and Frequency List 2.
Once you set the lists, press the F1 key to select 1-var. The calculator will give all the statistics of the distribution.

If you are doing 2-var stats SET the lists and press F2 2-var. The calculator will give you the x-statistics, followed by the y-statistics.

Sep 17, 2011 | Casio FX9750GII Graphic Calculator

I can't seem to get my calculator into statistics mode. could you please explain it very clear. i must be mising something. i have a texas instrument calculator(Ti-30xA).thank you.

The TI-30Xa does not have a statistics mode. That statistics operations are available at all times, just like addition and subtraction. Just enter the data with Sigma-plus and then calculate the desired statistics---mean, standard deviation, and so forth.

Full details are in the "One-Variable Statistics" section of the guidebook (page 9 in my copy). If you need the guidebook, you can download one from

Jun 23, 2011 | Texas Instruments TI-30XA Calculator

Can you please help me on how to calculate mean, median, mode, standard deviation calculation on casio fx-991ms scientific calculator

This will show you how to do statistics (calculate average, standard deviation, regressions etc.) as to the mode and median refer to the definitions.

TO COMPUTE STANDARD DEVIATION AND 2-VAR STATISTICS.

I assume you know the theory. I will show you the key strokes

For 1-Var statistics
Press [MODE][3:STAT] [1:1-VAR]. You are ready to enter values in the X column.
Enter a number and press [=]. Cursor jumps to second number to enter.
Keep entering numbers and pressing [=] till all numbers are in. Press the [=] key after the last one.
Press [AC] key to clear the screen.
Press [SHIFT] [STAT] (above digit 1.) then [5:Var]. Screen displays the statistical variables 1:n ;2: x bar; 3: x sigma n; 4:x sigma n-1.
Press the number corresponding to the statistical value you want, ex 1:n . The variable appears on screen. Press [=] and it will be displayed.
To display another variable press [SHIFT][STAT][5:Var][ 1,2, 3, or 4] .

To access the sum of squares sigma x^2 and the sum of data sigma x press[SHIFT][STAT][4:SUM] then [1: for sigma x^2] or [2: for sigma x]. Press [SHIFT][STAT][6:MinMax] to access minX and maxX.

For 2-var statistics
To perform 2 variable statistics you press [MODE][3:STAT] and any of the other regression options (except 1:1-Var). A two column template opens where you enter the X and Y values. When finished entering data, press [SHIFT][STAT][5:Var]. to access the different statistics. As I assumed above, you should be able to recognize what each variable means.

Apr 19, 2011 | Casio FX-115ES Scientific Calculator

How do I put my calculator in statistics mode?

The TI-30XA does not have to be switched to a statistics mode, the operations are available all the time. The choice of operations are somewhat limited; the calculator offers statistics functions for one dimensional data sets only (no linear interpolation of (x,y) value pairs, for example):
• [2nd] [CSR] - erase statistics data
• [] - add a number to the sample set
• [2nd] [] - remove a number from the sample set
• [2nd] [FRQ] - multiple entry of the same sample value
• [2nd] [n] - sample set size
• [2nd] [] - sum of all sample elements
• [2nd] [] - sum of the squares of all sample elements
• [2nd] [] - average of the sample set
• [2nd] [] - standard deviation (sample set is a complete set)
• [2nd] [] - standard deviation (sample set is a subset of a larger set)
The calculator displays "STAT" if the current sample set is non-empty.

Example: calculate the average and standard deviation of the set { 3, 4, 5, 5, 5, 5, 6 }.
1. [2nd] [CSR] - erase stat memory
2. 3 [] 4 [] 5 [2nd] [FRQ] 4 [] 6 [] - enter the data, note the use of [2nd] [FRQ] to enter the four occurrences of "5". Entering 5 [] four times would have done the same.
3. [2nd] [] - display the average of the set, (4.714...)
4. [2nd] [] - display the standard deviation of the set (0.8806...)

Jan 25, 2011 | Texas Instruments TI-30XA Calculator

I don't know anything about physics or statistics or anything like that so I cannot do a test problem. :-( But I am in physics now and the professor said we needed a calculator that can do 1 and 2 variable...

Do not go buy another calculator because this one does 1-var, 2-var, as well as some regression models, and some distributions.
For 1-var and 2-var statistics read on.

TO COMPUTE STANDARD DEVIATION AND 2-VAR STATISTICS.

I assume you know the theory. I will show you the key strokes

For 1-Var statistics
Press [MODE][3:STAT] [1:1-VAR]. You are ready to enter values in the X column.
Enter a number and press [=]. Cursor jumps to second number to enter.
Keep entering numbers and pressing [=] till all numbers are in. Press the [=] key after the last one.
Press [AC] key to clear the screen.
Press [SHIFT] [STAT] (above digit 1.) then [5:Var]. Screen displays the statistical variables 1:n ;2: x bar; 3: x sigma n; 4:x sigma n-1.
Press the number corresponding to the statistical value you want, ex 1:n . The variable appears on screen. Press [=] and it will be displayed.
To display another variable press [SHIFT][STAT][5:Var][ 1,2, 3, or 4] .

To access the sum of squares sigma x^2 and the sum of data sigma x press[SHIFT][STAT][4:SUM] then [1: for sigma x^2] or [2: for sigma x]. Press [SHIFT][STAT][6:MinMax] to access minX and maxX.

For 2-var statistics
To perform 2 variable statistics you press [MODE][3:STAT] and any of the other regression options (except 1:1-Var). A two column template opens where you enter the X and Y values. When finished entering data, press [SHIFT][STAT][5:Var]. to access the different statistics. As I assumed above, you should be able to recognize what each variable means.

Jan 22, 2011 | Casio FX-115ES Scientific Calculator

How to solye statistics problem

I have no clear idea what you mean by solve statistics problem. But if your problems involve finding the standard deviation and other statistical values then this post will help you.

The variance is the square of the standard variation

TO COMPUTE STANDARD DEVIATION AND 2-VAR STATISTICS.

I assume you know the theory. I will show you the key strokes

for 1-Var statistics
Press [MODE][3:STAT] [1:1-VAR]. You are ready to enter values in the X column.
Enter a number and press [=]. Cursor jumps to second number to enter.
Keep entering numbers and pressing [=] till all numbers are in. Press the [=] key after the last one.
Press [AC] key to clear the screen.
Press [SHIFT] [STAT] (above digit 1.) then [5:Var]. Screen displays the statistical variables 1:n ;2: x bar; 3: x sigma n; 4:x sigma n-1.
Press the number corresponding to the statistical value you want, ex 1:n . The variable appears on screen. Press [=] and it will be displayed.
To display another variable press [SHIFT][STAT][5:Var][ 1,2, 3, or 4] .

To access the sum of squares sigma x^2 and the sum of data sigma x press[SHIFT][STAT][4:SUM] then [1: for sigma x^2] or [2: for sigma x]. Press [SHIFT][STAT][6:MinMax] to access minX and maxX.

For 2-var statistics
To perform 2 variable statistics you press [MODE][3:STAT] and any of the other regression options (except 1:1-Var). A two column template opens where you enter the X and Y values. When finished entering data, press [SHIFT][STAT][5:Var]. to access the different statistics. As I assumed above, you should be able to recognize what each variable means.

Dec 22, 2010 | Casio FX-115ES Scientific Calculator

Press 2nd [STAT] then select CLRDATA to clear statistics data. Select 1-VAR or 2-VAR for one-variable or two-variable statistics. Press DATA and enter your data (x for 1-VAR or x and y for 2-VAR). Press 2nd [EXIT-STAT] and select N. Press STAT-VAR to see a menu of statistics variables and their values. Sx (and Sy) will give you the standard deviation, sigma-x (and sigma-y) will give you the population standard deviation.

Dec 14, 2010 | Texas Instruments TI-30 XIIS Calculator

I cant get the stdDev to work, how do you enter teh key strokes

Hello,
Here are some screen captures to illustrate how you set up your statistics. Press [Diamond][HOME][ENTER] . Type in command NewProb and press [ENTER]. It clears old data that may be in lists.
Press [Apps] key then 6 to select Data/Matrix editor. Select New, to create a new data set or current to select the last data set you worked on, or Open if some old data sets exist. Now we select New

Arrow right to unold the data menu and select Data. Leave folder as main or give a different folder name. Name the data set. Here teststd

After [ENTER] data entry sceen is displayed. Enter values

Press [F5:Calc] to access statistical values. Select 1:OneVar statistics

Identify the columns you want to do statistics on. Here we have only one column, namely c1

Press [ENTER] to save. First batc of statistical results are displayed.

Use [Arrow Down] to uncover the rest of the results.

These are the basic steps you follow for most statistical calculations.
Hope it gets you started.

Oct 05, 2009 | Texas Instruments TI-89 Calculator

Related Topics:

18 people viewed this question

Level 3 Expert

Level 3 Expert