Question about Fujitsu Siemens LifeBook N3511 Notebook

1 Answer

Fujitsu N3511 not reading 2GB SD Card

Hi there,
I bought a Dikom 2GB SD Card for my camera and the first time I put it into the card reader slot on my Fujitsu Lifebook N3511 nothing happened.
Any suggestions on how to get the pics off the card?

Posted by on

  • 2 more comments 
  • johnjudnic Dec 08, 2008

    I have checked with another sd card and the reader works fine. The new card didn't come with a cd rom so I presume it's plug-n-play.. I went to the Dikom website and they don't offer any driver downloads. Any other suggestions?

  • MRMOU812 Apr 08, 2009

    Fujitsu Tablet reads a 1 Gig SD but does not read a 2 Gig card.

  • Lalit Varadpande
    Lalit Varadpande May 11, 2010

    the card driver will part of the computer so look for it in the software CD that came with it..

  • Lalit Varadpande
    Lalit Varadpande May 11, 2010

    is the card reader working?do check if the driver is installed..a good option is to use an external card reader..also check if the card is snugly fit inside the card reader.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,110 Answers

You have install memory card driver first..

Posted on Dec 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Nikon S6000. I recently bought a card for it at a Big Lots store. Here is what is on the front of the card: "PNY Optima SD HC 120 min HD 8GB." The problem is that the card will not come...


"SD" cards larger than about 2GB are actually SDHC cards. SD and SDHC cards fit the same slots, but they are slightly different electrically. Many cameras won't work with SDHC (high capacity) cards. SDHC is not backwards compatible.

It sounds like your camera is able to understand SDHC, but your card reader is not. It won't cost much to buy a new card reader, but make sure the specs mention SDHC.

Jan 18, 2011 | Nikon Coolpix S3000 Digital Camera

1 Answer

I have tried a new sd card for more memory and it reads card error with every new card i try i've tried 3 different cards now and the original still works so i know the reader works but it just doesnt...


You won't be able to use a card larger than about 1GB (maybe 2GB) in this camera. "SD" cards larger than 2GB are actually SDHC cards. SD and SDHC cards fit the same slots, but they are slightly different electrically. Many cameras won't work with SDHC (high capacity) cards. SDHC is not backwards compatible.

Dec 29, 2010 | Panasonic Lumix DMC-FZ7 Digital Camera

1 Answer

My computer does not recognize my SD 2GB SD Flash Card which I insert into my camera and take pictures. I have a slot on my computer for SD cards. Can I just put the card in the slot and access the...


yes you can directly use the SD card slot, make sure you unlock the write protection before inserting it into the slot if you wish to modify or copy the contents from or to the card.

Jun 24, 2009 | SanDisk 2GB microSD Memory Card

1 Answer

Nothing happens when I put in a 2gb SD chip


Check to make sure it isn't an SDHC card. Most older card readers aren't able to read the formatting of the newer cards. You may need to buy a new card reader with SDHC support.

Jun 08, 2009 | Compaq tc4400 Tablet PC

3 Answers

Just bought 4GB SD card that hx4700 does not recognise - help pse


Your slot in the iPAQ is a SD slot, not a SDHC slot - therefore it will not read the card. Your PC card is probably a dual reader. The SD cards look the same but are different. Have a read of this...
http://en.wikipedia.org/wiki/Secure_Digital_card

Dec 10, 2008 | HP iPAQ HX4700 Pocket PC

2 Answers

Card has wrong format?


The first thing you will have to check the card. There is slot on the card that contains a switch. This will lock the card so that it is write-protected. This will cause the unsupported card error.

If the card looks fine, try a card reader just to confirm that the card has not been corrupted.

If the card is functional and you can read its contents from the PC or another SD-slot device, then the issue is your camera. The slot contains thin copper prongs that comes in contact the copper surface on the back of the SD card. If the prongs are bent or damage, then the camera cannot read your card.

Dec 05, 2008 | HP Photosmart M425 Digital Camera

1 Answer

Sd Card reader not recognising SDHC cards


this is from CNET:

"SD and SDHC compliance
If your computer's internal card reader works with 2GB (or lower) SD cards but fails to read a 4GB (or higher) SDHC card, then the computer's internal reader is not SDHC compliant.

This same logic also applies to digital cameras, if the digital camera reads 2GB (or lower) SD cards but fails to read a 4GB (or higher) SDHC card, then the digital camera is not SDHC compliant.

SD and SDHC specifications
The initial SD card specification defined the interface for cards only up to 2GB capacity. The subsequent SDHC specification was developed to provide increased capacity of 4GB - 32GB cards. Computers and other products purchased before 2008 may not be SDHC compatible. Computers and other products purchased before 2007 are not SDHC compatible.

Verifying the card reader slot
If the card reader slot on your computer does not have the SDHC logo, it is most likely not SDHC compatible and will only read cards up to 2GB capacity.


Other options you can use to read files on your SDHC card
If your computer's card reader is not SDHC compatible, you have 3 options available:

1. You can connect your camera (or other device) that works with SDHC to your computer using a USB cable that came with the camera. You should be able to transfer files to the computer this way.

2. You can contact you computer manufacturer to see if they have a free firmware update for your model that will make it SDHC compatible

3. You can buy inexpensive SanDisk SDHC card readers that will connect to your computer's USB port."

source: http://kb.sandisk.com/app/answers/detail/a_id/54/kw/SD%20SDHC/r_id/101834

Mar 03, 2017 | Computers & Internet

4 Answers

Computer is not reading my Micro SD, but phone is reading..


What size is the SD card in GBs? If it is larger than 2GB (4 or 8) do you have a SDHC card reader?
Also try formating the card first in the phone and then using it. Using it straight out of the package, while able to be written, my have difficultly with other devices reading the data.

Jul 23, 2008 | PNY 2GB microSD Memory Card

1 Answer

SD SLOT WONT READ 4GB MINI SD REG SPEED


try the 4gb card in a camera or phone. If the card is formatted in fat, it wont be recognized as the fat has a gb limit under 4 I believe. May want to reformat it in a camera or phone with fat32

Jan 24, 2008 | Compaq Presario X1000 Notebook

Not finding what you are looking for?
Fujitsu Siemens LifeBook N3511 Notebook Logo

730 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Siemens Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Marcin

Level 2 Expert

191 Answers

Are you a Fujitsu Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...