Question about Washing Machines

Open Question

Need a dayco blue label belt serial no m-22 - Washing Machines

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need the serial number to kenmore model number 363.9532783


There is no way to identify the S/N from the model number only. The model number only indicates what features were included in that model. Hundreds or thousands of that model may have been made. Unless you have the purchase receipt that MAY have the s/n on it, you will either need to work harder to enhance and read the faded label or live with the fact that the serial number is unattainable.

Sep 25, 2015 | Kenmore Washing Machines

1 Answer

Serial number on washing machine does not match what can I do


Usually serial numbers are found on doors which can sometimes be swapped out and replaced by similar make from another machine.chances are you just need the model and make as belts are quite universal within the makers model range.

Nov 27, 2014 | Kenmore Washing Machines

1 Answer

Where is serial number


Hello Martin;

My name is Peter. I am a retired field service appliance technician.

The serial number only tells how old the unit is and where it was manufactured.

The most important number is the model number.

Anyway, when you open the washing machine door there will be a label, not on the door but on the machine with both the model and serial number

Nov 24, 2014 | Washing Machines

1 Answer

Cannot locate the serial num ber on my Ciabro washing machine


Typically the model and serial number both are ona label on the rim of the tub inside the door usually on the upper left corner AND on the back as well

Aug 31, 2011 | Whirlpool Washing Machines

1 Answer

We just purchased a Whirlpool Cabrio Top Loading Wash Machine and I am needing to know where to find the serial number! The Model Number is WTW5500X... Thanks!


The exact model&serial number can be on a label on the rim around the door usually in the upper left corner. In many cases a second label is on the rear of the washer

Aug 05, 2011 | Washing Machines

1 Answer

Where/how do I find the age of my washer


It is usually printed at the serial tag. Just open the dryer's door and look for the label. If there is no label, then look on the back of the appliance (If machine is older than 10 years old, look on the back)

If there is only model and serial number but no manufacture date, provide the numbers on the label so we can find that information.

Jan 02, 2010 | Whirlpool Washing Machines

2 Answers

Maytag model SAV365ZAWW, Serial No. 10075532EC; I replaced the belt on my waher but it's rubbing on the pump and is slightly shaving the belt. Need diagram/picture for proper placement of belt. HELP!...


You have now found the problem that caused your old belt to fail. you will need to replace your idler lever assembly. go to www.partselect.com and enter your model number. This is your part number you will need. PS2027756 The site will give you a parts blowup so that you can see the part you need. You can also order the part from them. The Idler lever is worn and causing your belt to be misaligned.
Please rate solution

Sep 03, 2009 | Maytag SAV365ZAWW 22 CYC 4SP 3.3 CF BRAND...

1 Answer

How do I replace the belt on a whirlpool washer? I have the belt. Oh, You charge for this. I thought it was free. Silly me. Never mind.


if it,s a belt drive whirpool it's at least 22 yrs old ..if you never done one it can be tricky..1st remove back ..remove brace on rear and the other 2 from bottom remove the 1 bolt in transmission that has a spacer lossen the other 2 but DO NOT REMOVE.belt will need to be worked up throyugh where the spacer was removed and between where clutch spring is ..woops!! remove springpush up clutch bracket work belt over pin ..ck parts bag there are usually instructions and picture if the part is a whirpool 95405 belt hope this helps some

May 20, 2008 | Whirlpool Washing Machines

1 Answer

Installing washing machine motor P/N 35-5022, need wiring schematic to hook up to machine internals


Is there a white or black connector that clips on the motor switch? it should be an easy unplug and plug the new motor in.

I dont of any Manufacturer that uses single wire connectors any more.

Are you sure you got the correct motor?

Apr 22, 2008 | Maytag Legacy Series Top Load Washer

2 Answers

Installing washing machine motor P/N 35-5022, need wiring schematic to hook up to machine internals


The black or brown connection block on the motor should be color coded to match the harness. If not you will need to remove the control panel and find the service guide sheet. This will give you the wiring diagram for the whole machine.

Jan 10, 2008 | Maytag Performa PAV2200

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...