Question about Apple iBook G4 (Z0AZW13397068) PC Notebook

1 Answer

SCREEN NOT COMING ON

When I turn on the computer, the screen never comes on. The only thing I did was close the computer with the screen still on for a couple of hours. I have already tried resetting it twice.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 461 Answers

Remove the battery and hold the power button for 4-6 seconds, then insert the battery and try to power on.

Posted on Dec 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Computer powers up but only a grey screen appears


Use Recovery Disc to repair. You may lose everything.

Aug 26, 2013 | Apple MacBook Pro Laptop Computer with...

1 Answer

Lines screen


screen needs to be replaced. lines will start coming out over and over.

May 07, 2013 | Apple MacBook Pro Laptop Computer with...

1 Answer

Computer Turning on Incorrectly...


Sounds like a memory problem to me. Have you opened the back to make sure your RAM is seated properly? Take it out and reseat it..or maybe have a bad stick..try replacing it.

Jul 25, 2012 | Apple MacBook Pro with 17" Display

1 Answer

My other computer, G4 Macbook Pro, has a screen issue. When it is turned on and in process of coming up, the screen shows large sections of odd colors such as light pink or light green or light blue. Then...


Connect an external display to the computer. If the lines and distortion shows up on the external display its the video card, which is attached to the logic board. So, the whole logic board will need to be replaced.
If the lines and distortion don't show up on the external display the issue is the LCD module, which will need to be replaced.

Jan 30, 2011 | Apple PowerBook G4 Mac Notebook

1 Answer

Macbook screen goes black after I log in.


Since the screen does turn on at the login page, I would say that it doesn't seem as though anything is physically wrong with your computer. It sounds to me like it's a software issue. Either get someone to try and reinstall your video drivers or to back-up your documents, files, etc., format the hard drive, and reinstall a fresh copy of Mac OS.

Dec 01, 2009 | Apple MacBook Pro PC Notebook

2 Answers

Cant log in.


http://www.macobserver.com/tip/2003/06/16.1.shtml

Oct 27, 2009 | Apple iBook G4 (Z0AZW13397068) PC Notebook

2 Answers

Black screen says pres any key to boot rom CD disk error press any key to restart. Cant do a thing turn it on or off get the disc out. I have tried to load windows xp through boot campon my macbook and...


You have probably formatted the hard drive when trying to install XP, XP is not compatible with Mac hardware. You will need to purchase a copy of the Mac OS or try and locate the restore disks that should have come with your computer.

Jul 15, 2009 | Apple 13-inch MacBook - Intel 2.0GHz Intel...

1 Answer

Stuck on the restart your computer screen.


You may have installed something in the startup items folder that your mac isn't liking. 
When you turn the iBook on, press the shift key as soon as you hear the startup tone. hold it down until you see the gray apple screen. This will get you into safe mode, hopefully then you'll be able to fix whatever you did from there. If you are still at a loss, get in touch. 

Dec 11, 2008 | Apple iBook G4 Mac Notebook

1 Answer

Hi sir/ Mm


look closely at the screen. You might have to change the lighting or shine a powerful light from the back of the screen, through the Apple logo. If you see a dim image, your problem is either with a bad "inverter" board, a bad "CCFL" light (the bulb that lights the screen), or with the logicboard itself. check back for more info if this is happening.

Jul 08, 2008 | Apple 15" PowerBook G4 Aluminum 1.67 GHz...

3 Answers

Computer turn-on problem


dot.gif

dot.gif POST troubleshooting steps. Question: Post troubleshooting steps.
Additional information: This document is intended to help users who are experiencing issues with the POST and may have any of the below symptoms.
  1. Computer beeps irregularly when the computer is turned on.
  2. Computer turns on but does not boot.
Note: Not all computers have beep codes, some of the newer computers have LED's that light up that indicate the error or have a sound file to indicate the error.
Cause: This issue can be caused by any of the below situations.
  1. New hardware conflicting with old hardware.
  2. Bad or failing hardware device.
  3. Connections not connected or connected properly.
  4. Recent electrical storm that caused a surge that damaged computer.
  5. Other hardware issue.
Answer: Warning: Some of the below steps recommend removing physical parts within the computer. While in the computer it is highly recommend that you be aware of ESD and its potential hazards. Information about ESD and proper grounding techniques are found on our ESD help page. Note: Make sure your computer is turning on, if you press the power button and nothing happens (no lights, no sound, no fans, etc.) then this issue is not a NO POST but is an power related issue see document CH000312. Remove new hardware If any new hardware has been recently added to the computer, remove that hardware to make sure it is not the cause of your issue. If after removing the new hardware your computer works it's likely the computer is either not compatible with the new hardware or a system setting needs to be changed to work with the new hardware device.
Disconnect external devices Remove everything from the back of the computer except the power cable. Turn on the computer and see if it beeps normally. If the computer has never beeped keep the monitor or display connected to see if any change occurs.
Identify beep code If you are receiving a sequence of beeps see our beep code page for a listing of different beep codes and their explanation and/or your motherboard or computer documentation. These beep codes are meant as a method of quickly identifying what computer component is failing or bad.
Check all fans Make sure all fans are running in the computer. If a fan has failed (especially the heat sink fan for the CPU) your computer could be overheating and/or detecting the fan failure causing the computer not to boot.
Check all cables Verify that all the cables are properly connected at that there are no loose cables by firmly pressing in each cable.
  • All disk drives should have a data cable and power cable connected to them.
  • Your power supply should have at least one cable going to the motherboard. Many motherboards may also have additional cables connected to them to supply power to the fans.
Disconnect all expansion cards If the above recommendations still have not resolved the irregular POST attempt to disconnect the Riser board (if applicable) and/or each of the expansion cards. If this resolves the issue or allows the computer to post connect one card at a time until you determine which card is causing the issue.
Disconnect all drives If you were unable to determine by the beep code what is failing or do not have a beep code disconnect the IDE, SATA, SCSI, or other data cables from the CD-ROM, hard drive, and floppy drive from the Motherboard.
If this resolves your irregular post or you now get an error message attempt to re-connect each device one at a time to determine which device and or cable is causing the issue. In some situations it can also be simply a loose cable connection that causes the issue.
Remove the RAM If you continue to to receive the same problem with all the above hardware removed attempt to disconnect the RAM from the Motherboard and turn on the computer. If the computer has a different beep code or if your computer was not beeping and is now beeping turn off your computer and try the below suggestions. Making sure to turn off the computer each time you're adding and removing the memory and then turning the computer back on to see if the suggestion resolves the issue.
  1. Re-insert the memory into the same slot.
  2. If you have more than one stick of memory remove all but one stick of memory, try rotating through each stick.
  3. Try one stick of memory in each slot.
If you're able to get the computer to boot with one or more of the sticks of memory it's likely you're dealing with some bad memory. Try to identify which stick of memory is bad and replace it.
If you're able to get memory to work in one slot but not another slot. You're motherboard is defective you can either workaround the issue by running the memory in a different slot or replace the motherboard.
Power cycle the computer In some situations a computer may have power related issues often caused by either the power supply and/or the motherboard. To help determine if this is the cause of your issue try turning the computer on, off, and back on as fast as possible, making sure the computer power light goes on and off each time. In some situations you may be able to temporarily get the computer to boot.
This should only be used as a temporary workaround if you're able to get this to work. Often this is good for users who may have not done a backup and need to get the computer up one more time to copy files before starting to replace hardware.
Disconnect and reconnect the CPU For users who are more comfortable working with the inside of their computer or who have built their computer one last recommendation before assuming hardware is bad is to reseat the CPU by removing it and putting it back into the computer.
Bad motherboard, CPU, RAM, and/or power supply If after doing all of the above recommendations you continue to have the same issue unfortunately it is likely that you have bad Motherboard, CPU, and or RAM. The next step would be either to replace these components and/or have the computer serviced. If you plan on doing the repairs yourself or you are a repair shop it is suggested that you replace the Motherboard first, RAM, CPU, and then power supply in that order and/or try swappable parts from other computers.

Dec 06, 2007 | Apple MacBook Pro Laptop Computer with...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Sean Cole
Sean Cole

Level 2 Expert

250 Answers

Are you an Apple Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...