Question about Sony KV-36FS100 36" TV

1 Answer

Video blinking - sound works fine (KV-36FS10)

My TV video will blink at the rate of about 4-5 per minute whenever something is plugged into it. I have a Playstation 2, DVD player and 2 different models of satellite receivers (RCA). The only time the video stops blinking is if there is nothing plugged in and the TV is on one of the 4 video modes or on regular TV mode (static). Changing some of the settings in the menu doesn't help either. I changed the video mode from vivid to high and the it just blinked faster (about once every 5 seconds). Is there an easy way to fix this? Do I need to have a tech fix this and if so, about how much will it cost me? Thanks a bunch for any help.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,284 Answers

Sounds like you have 1999/2000 model Sony with a CRT that is showing its age. This would be a tech fix but, most likely not worth the repair cost. It probably flashes slower when the set is cold and gets more rapid when it warms up.

Posted on Feb 21, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a sony tv model kv-27v42 i have sound but no pictture and stand by light blinks what is the problem


How many times do this standby light blinks at a time of switch on? These blinks are fault indications. From the number of these blinks, you can get an idea about the faulty circuit section inside it. Count it. If you wish to get more details about the blinking codes to Sony TVs, check this link.

Feb 24, 2013 | Televison & Video

1 Answer

Sony kv-27v40 standby/timer blinks 5 times


Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

Apr 23, 2012 | Sony KV-27V40 27" TV

1 Answer

Sony wega trinitron won't turn on


  • Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted. Check IC1509, Q1505
  • Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.
  • and some times the eprom ic is fulty ...
  • try to unplug your tv from the main power for 5 hours then press the power button and keep pressing for 7 seconds then release ,if this do not work ,you should take your tv to a qualified person
  • i hope this helps ..
  • Jan 01, 2009 | Sony FD Trinitron WEGA KV-36HS500 36" TV

    1 Answer

    HD50PLW164 Blue LED blink 10 times fast 1 time slow , TV restarts


    For clarification of code/blinks significance you should check at mfg web site .

    Sep 15, 2017 | RCA HD50LPW164 50" Rear Projection HDTV

    1 Answer

    KV-36FS10 - No picture or sound Stand By Light blinks


    5 Blinks usually means the horozontal circuit has problems and parts need to be replaced. unplug power to reset

    Jun 15, 2008 | Sony KV-36FS100 36" TV

    1 Answer

    Sony KV-36FS17 36" TV


    Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board.
    Hope this helps.

    Jan 22, 2008 | Sony KV-36FS17 36" TV

    1 Answer

    Dopped tv, worked fine, now not picture but has sound


    Most drop damage is in/around the area of the flyback xformer.My Motto==PVAT! With magnifier examine PCB for crack(s).May still be fixable.

    Jul 31, 2007 | Sony KV-36FS100 36" TV

    2 Answers

    No picture on a Sony KV-32V65 TV


    AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the Cboard, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking.

    Jan 18, 2007 | Sony KV-32V65 TV

    Not finding what you are looking for?
    Sony KV-36FS100 36" TV Logo

    Related Topics:

    77 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sony Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    75178 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Jerry Greenberg
    Jerry Greenberg

    Level 3 Expert

    1689 Answers

    Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...