Question about HP LaserJet 4L Printer

Open Question

When I print using the laserjet 4lI get the following message emqrstux@pjl'comment'hp'laserjet'tlj@pjl'set'pageprotect}off@pjl The green ready and data light stay green and I have to hit the front panel to get the error message across the top of page. the rest of the page is blank

Posted by on

2 Suggested Answers

frcs68
  • 1605 Answers

SOURCE: LaerJet 5p Extra page prints with code

check all your application.(word, Excel) by going into print preview, you might have a single black page at the begining. ( this happens when you save the templete with a blank page.)

if that is not, let me know. got to go one step at atime.

Posted on Oct 28, 2008

  • 4 Answers

SOURCE: HP LaserJet 3330 prints a configuration page after each print job

If you scroll through the menu functions to service, you can restore factory defaults. If you use the fax function you'll need to run the AiO assistant again. It may take care of it. I didn't see anything on the config page or the menu structure page that would indicate an option to require a print report after each document.

Posted on Mar 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp p3005x - how to replace formatter board


This is a known issue that cannot be addressed through menus. What you need is a PJL (print job language) file that programs the formatter activate the duplex function. Does your configuration page show the correct serial number and page counts? If not then likely the formatter you purchased was used. If you provide serial number, page count I can provide you with the correct PJL file that will restore your duplex function.

Sep 16, 2014 | HP LaserJet P3005x Printer

2 Answers

I replaced a hp laserjet p2015 printer with another hp laserjet p2015 printer but it can't print.what's the problem,pls help me



This HP printer is comes with the USB cable. To install the printer software, you need to install the USB driver compatible to your printer and then it will ready to print.

Dec 08, 2010 | HP LaserJet P2015 Printer

1 Answer

No printing, printer says ready, will test print from menu button


Go to my computer, click on control panel, click on printer/fax and see what is set for default. What ever printer icon that says ready, right click and set as default.

Mar 11, 2010 | HP LaserJet 4 plus Printer

1 Answer

How to change the serial number in hp laserjet 3055n after replace the foprmatter board.


I dont have the answer; however the closest I could find in teh 3055 service guide was the following statement:
"Printer job language (PJL) software commands Many PJL scripts are available for restoring parameters such as paper size and page counts after the formatter has been replaced. For comprehensive instructions, see the Printer Job Language Technical Manual and the Printer Job Language Technical Manual Addendum"
I do not have those two manuals but it would seem that is the direction you need to head in order to solve this issue. Many of the HP laserjet's have an easier method than using PJL commands, however this model does not provide such ease of use.
Good luck!

Aug 29, 2009 | HP LaserJet 3055 All-In-One Printer

1 Answer

HP LaserJet 3330 prints a configuration page after each print job


If you scroll through the menu functions to service, you can restore factory defaults. If you use the fax function you'll need to run the AiO assistant again. It may take care of it. I didn't see anything on the config page or the menu structure page that would indicate an option to require a print report after each document.

Mar 23, 2009 | HP LaserJet 3330 All-In-One Printer

1 Answer

LaerJet 5p Extra page prints with code


check all your application.(word, Excel) by going into print preview, you might have a single black page at the begining. ( this happens when you save the templete with a blank page.)

if that is not, let me know. got to go one step at atime.

Oct 28, 2008 | HP LaserJet 5p Printer

1 Answer

LaserJet 5p extra page prints first with code


When you get that kind of information those are instructions to the printer. It has been my experience that the drivers loaded for the printer are not the correct ones. Check to make sure that you have the drivers for a HP 5P printer and verify that is what kind a printer you have.

Oct 28, 2008 | HP LaserJet 5p Printer

1 Answer

Pgm to staple with a Canon ImageRunner 5000


Canon handles it as PJL comments.

Google the string "PJL COMMENT CANPJL"

Aug 25, 2008 | Canon imageRUNNER 5570 Copier

Not finding what you are looking for?
HP LaserJet 4L Printer Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...