DVD gives split image

It appears they are no longer available, but i found one claiming to be a substitute. It's at this link GO VIDEO Replacement Remote Control for DV102150RM DV2150

Check its loading belt and loading motor.

Govideo DV2150

1. Open the disc tray
2. Press 0, 5, 2, 0
3. Press UP, DOWN, LEFT, RIGHT
4. Press the0 button on the remote
   
5. Close the disc tray

Hi,
Please get the code here : www.videohelp.com/dvdhacks/govideo-dv2150/5210
www.dvddemystifiziert.de/codefree_en/govideo.html
Regards, Jay

U have a tube analog tv that going through a Digital converter box?Vcr signal are analog signal too.That why u getting the picture that bad.

I found a place that had the item. Thank you.

Marie M.

You need to select channel 3 or 4 on your VCR! , or line-in if you connected through the (yellow/ white/ red) cable "better video quiality!" and selct the channel you want to record on your DTV box, not the VCR!

are they burnt disks?

I recently purchased a new flat screen TV a Samsung that has a remote that can be configured for all of your devices the manual for the TV has a list of codes that you have to put in so the remote can work with them. They have a code for a VCR player and some codes for a DVD player separate but not a code for a combo DVD/VCR player. I have hooked up another DVD player that I have and the procedure to set it up works fine and I have contacted Samsung and all the connections are correct do you possibly know if there is a different code for the combo units.

Thanks,

Robert Moore

I had the same problem: I unplugged the power for 10 seconds (literally unplugged it!) and also removed and reconnected the s-video cable. Voila - color picture again!
Good Luck!