Question about Projection Televisions
This is a common problem on older RCA projection tvs. There is a small power supply that powers the convergence circuit and that is what usually fails causing this issue. The model # will help you get the correct part. If you open the back of the set, it is the power board mounted above the convergence board (above the board with row after row of heatsinks). There will be a red and black wire that drops down to the convergence amp.
Posted on Dec 07, 2008
Tips for a great answer:
Jul 18, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...
Feb 15, 2009 | RCA P52926 52" Rear Projection Television
May 08, 2008 | Projection Televisions
Sep 24, 2007 | RCA HD52W59 HDTV Projection Television
98 people viewed this question
Usually answered in minutes!