Question about Samsung HCM653W 65" Rear Projection Television

1 Answer

Screen Size Lagrer than frame in Component 1080I

How do I adjust the width and height in component settings

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Accessed Service options and correct wrong data

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Overscan


Yes, if you have the original remote and get into the adjustment menu which is hidden you can adjust width, height, and centering if you want.

Dec 09, 2012 | Mitsubishi VS-50111 50" Rear Projection...

1 Answer

When using PS3 on RCA D52W19 TV, the screen does not fit ( it is zoomed and off-center) in 1080i resolution.


hello!
Have you tried to toggle "format" or "screen size"? On those sets non HD and HD settings could be adjusted separately. Try that, first. If no luck, try similar settings on PS3. I bet, you will be able to match screen format there, as well. To me it looks, like picture formats are mismatched. Also: try to use "component" cables, instead of DVI adapter cable, if nothing works.
good luck,
Alex.

Feb 16, 2012 | RCA D52W19 52" Rear Projection Television

1 Answer

How do i hook my XBOX-360 up to this tv and get 1080i resolution? Thanks, Mike


You should be able to get 1080i with the Input/DVI port or the component video in ports of the TV. I believe the easiest option will be to set the XBox A/V switch to HDTV and use a component video cable (red, green, blue) from the XBox component out to the TV Component In. (with the audio out going to your TV or speaker system). Turn on the X-box and the My Xbox > System Settings. Then Console Settings > Display and chose the 1080i.

Set the TV Net Command (remote) and the Device settings for the input jack in use (component 1/2). Adjust the A/V menu for the Display before playing long.

Wen you change inputs, you will see a status screen for the settings for the TV input.

I hope this helps.

Cindy Wells

Sep 14, 2010 | Mitsubishi WS-48513 48" Rear Projection...

1 Answer

Picture too big for screen.


go to menu and adjust screen size(picture size)

Jul 29, 2009 | Hitachi FDX Series 43FDX10B 43" Rear...

1 Answer

PC via DVI to D52W20


I'm using a component dongle from an ATI x800. Never have had a problem. My resolution is 1664x936. I noticed that this RCA auto formats the screen size with the DVI-D or component, so you'll have to make the adjustments via your video card. Windows display properties might not let you select that resolution, so hopfully your video card software will allow you to pick a resolution. It would not let me use any kind of 720p resolution only 1080i settings would work.

Nov 25, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

I have a T5054 TV and the picture has zoomed in and is way too big, however in the picture settings menu the zoom option is not highlighted in Component mode.


There could be a problem, but verify the settings as listed in the owner's manual as follows:

1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
2 Press the ▲ or ▼ button to select Size, then press the ENTER button.
3 Press the ▲ or ▼ button to select the screen format you want.
Press the ENTER button.
Press the EXIT button to exit.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1 : Magnifies the size of the picture on the screen.
Zoom2 : Expands the Zoom1 format picture.
Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
4:3 : Sets the picture to 4:3 normal mode.
Just Scan : Use this function to see the full image without any cutoff when DTV
or HDMI 720p/1080i signals are input.
Press the P.SIZE button on the remote control to change the picture size.


And realize the restrictions as listed:

• In TV, VIDEO, S-VIDEO, and COMPONENT(480i, 480p) modes, all screen
modes can be selected. (16:9 ➞ Zoom1 ➞ Zoom2 ➞ 4:3)
• In COMPONENT(720p, 1080i) or HDMI(720p, 1080i) mode, 16:9, 4:3 and
Wide Fit can be selected.
• In Zoom1, Zoom2 and Wide Fit modes, you can move the picture on the
screen by pressing the ▲ or ▼ button.
•You can not change the picture size when PIP is set to Double.
•When Double ( , ) mode has been set in PIP, the Picture Size cannot
be set.
•Wide Fit can be used when watching a Digital HD (High Definition) signal.
Wide Fit sets the optimum picture format by expanding it both horizontally and
vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit
does not support all external devices (DVD, VCR etc.).


Keep us posted.
Dan

May 29, 2008 | Samsung Projection Televisions

2 Answers

Are there internal picture controls for the WS-55315?


Good Day; OPTION MENU "MENU 0370" SERVICE MENU. CAUTION document settings before any adjustments are made. V = vertical, H = Horizontal. Good Luck, big IRISH.

May 11, 2008 | Mitsubishi WS-55315 55" Rear Projection...

1 Answer

Green Tint in HDTV for the first few minutes.


Possibly adjustments to the service menu could rectify this. Also, adjustments must be made to customer settings in menu for each input. In the past I have improved or solved this by making service adjustments, however, if you attempt this, please make sure you know what you are changing and make sure you are in 1080i mode. Service code (mute,1,8,2,power on)vol+ and vol- to select an item. Use mute and the menu to adjust. Use add to save the settings. Take your time. Hope this helps.

Mar 11, 2008 | Samsung HCL5515W 55" Rear Projection...

2 Answers

Using the component 2 outlets


please read your owners manual for the samsung ptv to determine the best input to use and possible proper settings to adjust in your menu's.

Nov 15, 2007 | Samsung HCL4715W 47" Rear Projection...

2 Answers

Apple tv


The component 1 and component 2 inputs only go to 480i and 480p. The Apple TV must be plugged into the DTV input which will accept a 1080i signal.

Aug 18, 2007 | Mitsubishi WS-65807 65" Rear Projection...

Not finding what you are looking for?
Samsung HCM653W 65" Rear Projection Television Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...