Question about Prima C2012 TV

3 Answers

Prima TV mod. HT2778P

The green on/off switch is on all the time. When I push the button it blinks 3 times but I have a black screen and no sound

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,239 Answers

HI
Does the led blink when you press the power button? If so let me know how many blinks its blinking as thats an error code.Here are the error codes, and the corresponding problem:

12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filter cover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cable between FMT and Engine disconnected
 

Posted on Dec 07, 2008

  • ABHISHEK.C
    ABHISHEK.C Dec 07, 2008

    YOURS IS ERROR 12 SO PLEASE CHECKPOWER SUPPLY

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

There are 4 resistorss on the tv one in each corner inside you will need to take it to a shop to have it fixed

Posted on Dec 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Being that this is a very generic brand. These tv's are known as "throw aways" as when they break they are cheaper to throw away and replace.The companies offer little to no support. This tv will require professional service. If you need assistance contacting a professional near you to have it serviced please let me know. Please take a moment to accept and rate my solution.
Thank you,
Lee

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge hdtv mod #d40GW10 will not turn power button flashes 2 times


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience.

Feb 28, 2016 | Televison & Video

1 Answer

Power light comes on along with OCP light. No screen or sound. internal switching noises coming from inside the tv


Sharp TV - Flashing OPC & Power Lights - YouTube

? 0:50
https://www.youtube.com/watch?v=BH1OcQ6dIEE
Jul 1, 2011 - Uploaded by Tweetssun
Sharp Aquos TV flashing a OPC & Power Lights in a pattern of 3 flashes, ... Sharp Aquos LC-32D44 - One blink lamp error - Nopicture or sound - Diagnosis ... Repairing Flat Screen TV - Blacked out with blinking red light ...Missing: 32dv22u

Sharp lcd tv power button flashing - HDTV - Streaming Video & TVs ...

www.tomsguide.com/forum/54708-4-sharp-power-button-flashing

Feb 8, 2012 - 7 posts - ‎3 authors
We have owned a Sharp 32" LCD TV for about two years. ... However a quick Bing search shows that the blinking green light usually means a bad power board, which seems ... No picture, no sound, just a black screen and two blinking green ... a cable surge block on the coax where it comes into the house. Sharp lcd tv power button flashing - Digital TV
19 posts
Oct 14, 2012
Sharp hd tv blinking power no picture - Digital TV
2 posts
Jan 7, 2012
More results from www.tomsguide.com
Missing: 32dv22u

Sharp Aquos LC 42DH77: Inverter, Backlight, Power and ...

www.normsweb.com/tektips/42dh77.shtml

Jan 31, 2016 | Sharp LC-32DV22U Widescreen 32-Inch Class...

1 Answer

Tv turns on green light blinks three times then TV turns off


Ur power supply board is dead.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Apr 07, 2010 | LG 42LC2D 42 in. LCD HDTV

1 Answer

Program prima tv remote


prima lcd tv:lc-27w25s auto search passward

Mar 15, 2010 | Primax Electronics HT2778P TV

2 Answers

Sony kf 50e200a screen goes black and sound turns off for min...


TV has gone into "protect mode" to do just that to protect against the damaging failure that has been detected, you will need a servicer to diagnose the failure. Good luck and Merry Christmas!

Dec 25, 2009 | Televison & Video

2 Answers

Series of 3 blinking lights. manual says lamp door isnt fastened properly. it is. i tried unplugging tv, have opened and closed lamp door 3xl. still blinking.


After I unplug and then plug tv to reset I get a solid standby light,then when I push the power button I get a green light that blinks 6 times then it blinks red 6 times and then red 6 times continuosly with a slight delay between the 6 blinks of red.

Oct 11, 2009 | Sony Grand WEGA KDF-60XBR950 60" Rear...

2 Answers

Power button is green - no blinks / no picture / no sound


Unplug it from the wall, wait 2 minutes and plug it back in. if problem still exists, its probably the main pcb.

Jun 19, 2008 | Dynex 32 in. LCD Flat-Panel HDTV

6 Answers

Kdf-60xbr950 - red light blinks 3 times for a minute and tv turns off


same problem as others 3 blinking green lights then orangey colors then 3 red blinking lights afterwards shuts down fan runs for about 2 mins solution check your door cover for warpage or deformed just a bit under set screw there is a push in switch try and push it in with q tip while holding turn on tv if it works then that door is deformed and defective change it

thanks for solving my issue tv works again very helpfull thanks


Feb 13, 2008 | Sony Grand WEGA KDF-60XBR950 60" Rear...

1 Answer

Returns to standby


Green flashing 3 times = digital DC - DC converter fault
Red flashing 3 times = scan circuit fault

Oct 31, 2007 | Pioneer PureVision PDP-5040HD 50 in....

Not finding what you are looking for?
Prima C2012 TV Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Prima Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Prima Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...