Question about RCA B27TF680 27 in. TV/VCR/DVD Combo

1 Answer

DVD went in...and won't come out

I put a DVD in and it played for a few minutes, then the screen went blank. I tried the open/close button and the DVD won't come out. I turned off the unit, unplugged it, pushed all the buttons -- to no avail. Is there a secret manual button to eject the DVD tray to retrieve the DVD? If so, where would I find it -- left, right or center of DVD bay? Your detailed solution would be greatly appreciated.

Posted by on

  • karl3443 Mar 29, 2009

    Had a DVD in, just started to play it, decided to switch to regular tv. Fine and dandy. Later, when I went back to the DVD I could not get it to play, go forward, go backward, and I can't eject it. It is like "frozen". What suggestions?

×

Ad

1 Answer

Whatever you do, DON'T try ejecting it manually. it can ruin the dvd mechanism. The problem is in the dvd power supply. If you have some soldering skills and are good with a soldering iron(temperature controlled is best) you can resolder all the three-legged regulators on the dvd power supply board(small board to the right front of chassis). Good success, Meder's Tv

Posted on Feb 14, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bush 24 inch tv/dvd combi screen went blank as if it's on standby. won't respond to remote control. one week old. is it seroius?


try switching on tv point remote at the tv pressing the menu/exit button and holding for 10/20 seconds hope this works for you

Oct 07, 2012 | Bush Industries IDLCD26TV16HD LCD TV

1 Answer

Question


You might need to clean the lens. They have CDs that will help clean this.

Aug 28, 2012 | Memorex MVD2016 DVD Player

1 Answer

My dvd playeer was playing fine until I pressed the setup button, from there I went into the screen with 480P, 780P, 1080P Etc.. I pressed 1080P and the screen went blank and I cant even get back into the...


Try pressing the HDMI button on the remote control to toggle the display output to something that your television will recognize. You can also try The progressive button and see if that helps. I am assuming you model is the XD-E500 model.

Jan 13, 2010 | Toshiba XD-E500 DVD Player

1 Answer

Blockbuster dvd movie put in Bose player and pressed Play and showed NO DVD (it was in slot)and now will not eject. took front panel off dvd player hoping an emergency button but no. HELP


Completely power down the sound system, and unplug it from the wall socket. Wait a minute, and plug it in again. Power the system on.As soon as the power is on, press the OPEN/CLOSE button on the console. After a few seconds to a minute, the disk drawer will open.

Nov 21, 2009 | Bose Lifestyle 38 DVD Home Entertainment...

1 Answer

My Hp 1040i dvd writer won't play homemade videos I insert the dvd it detects the dvd but when I go to click the drive it just opens it like if it was a blank dvd you know like when you go to exlpore the...


installed POWERDVD program into your system unit and put the homemade video again and click on the powerdvd icon and click play button on it and it would start playing.

Nov 11, 2009 | HP DVD1040i 20x Super Multiformat Dvd...

1 Answer

Pioneer Dv 285 powers down after 15sec


Hi There, I've got the same problems with my DV 285. My power started going off approximately 5 to 10 minutes into the DVD. The only button that seems to work is the OPEN/CLOSE button. Once the tray closes, the unit shuts off. I can't even use the on/standby button to turn it on.

Feb 22, 2009 | Pioneer DV-285-S DVD Player

1 Answer

DVD Stuck in Player


While the above problem is not in the manual, I would try pushing and holding down the Open/Close buttton for an extended period to see if the unit will 'unlock' itself.

Mar 16, 2008 | Sanyo DWM-390 DVD Player

1 Answer

Not recognizing DVD player


i would say for some reason your dvd player is not compatible from now on with that brand of blank dvd!


get the firmware update from the brand website all you do is download the file burnit on a cd and put it in the dvd player should fix most and eventual problems

Jan 14, 2008 | Panasonic DMR-EH75VS DVD Recorder/VCR/HDD...

1 Answer

DVD player froze, now only turns off


Sounds like the power supply in the dvd player has failed. It works just well enough to turn on the led infront but as soon as you go to do anything it shuts off. This is common in cheaper dvd players. Unless you can troubleshoot electronics. Or know someone that can. Your best bet is to unplug the unit and disassemly and retrieve your dvd.

Jan 13, 2007 | Philips DVP642 DVD Player

Not finding what you are looking for?
RCA B27TF680 27 in. TV/VCR/DVD Combo Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75304 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1216 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...