Question about Phones

3 Answers

VTECH 5.8 DIGITAL CORDLESS PHONE W/ANSWERING MACHINE

CANT CALL OUT,STAYS ON DIAL TONE.WE KNOW PEOPLE CAN CALL INTHEY'VE TOLD US VIA CELL PHONE,BUT IT DOESNY RING,JUSTLITES UP AND WE CANT ANSWER

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 60 Answers

I would try to see if another phone works with your service to see if its your service or your phone first!! Then i would check to see if there is someone else close to your home with the same kinda phone in the area!! there might be a cross over on frequency!!

Posted on Dec 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Unploug all power cables and the phone cable to reset the phone. Connect back after ten minutes.

If there is a broadband filter remove it, try a different phone cable, and test the phone on a different phone line socket (elsewere).

If that does not work the phone is defective.

Posted on Dec 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

First, what is the exact model of the telephone. How long have you owned the phone? How long have you been having this problem? Once I have more information I will be able to assist you further. Please don't request more assistance until I have assisted you completely.
Thank you,
Lee

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to switch from pulse to tone dialing


Well, cannot find ia5862...but from ia5863 which must be similar; Manual at http://www.scribd.com/doc/64707312/Vtech-Phone-Ia5863-Manual-r2, it says... Set the dial mode
If you have touch tone service, the phone is ready to use as soon as the battery is charged. If you have pulse (rotary) service, you'll need to change the dial modee• Press
PROG.
• Press o runtil the screen displays
DIAL MODE:
and the current settings• Press
SELECT.
The current setting blinks • Press or to select
TONE
or
PULSE.
• Press
SELECT
to save

Hope it helps, sounds like the phone should ALREADY be on tone dial out of the box.

Jul 31, 2014 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

When I dial out on my Vtech phone, it goes back to a dial tone or a busy signal


Are you sure that the phone is even trying to dial? Push 1 digit and make sure dial tone is going away. Could be bad dial pad.

Apr 05, 2014 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

My Vtech cs5121 cordless phone has no dial tone


Vtech phones are junk! I have had many trouble calls for no dial tone,only to find out the Vtech phone is the only one they have,and it is defective.(It really DOES pain me to bill someone 91 dollars to tell them their 21 dollar phone is broken-always try another(preferably hard-wired) phone before calling the phone company!

Dec 30, 2012 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

If I enter the phone number and then press "talk", the numbers dial extremely quickly, a dial tone comes on, and I have to enter the numbers again. How do I fix this? It is a Vtech 6.0 DECT.


Usually there are two modes provided to all fixed line telephones. Tone mode and pulse mode. Pulse mode will dial the call slowly and Tone mode will dial calls quickly. Your phone is in Tone mode i guess. You need not dial the numbers again. Wait for few seconds and the call will get accomplished!

Aug 01, 2010 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

No dial tone. Base will ring. Handset has no


Check the Battery on the Handset. remove the pwr frm the base unit n connect aft 30 sec. aft this if it still says the same msg, then the handset needs to be replaced.


Mar 03, 2010 | Vtech DECT 6.0 Cordless Phone with Digital...

3 Answers

Answer machine


Sometimes there is a switch, sometimes it's a key combination. What's the model number and I can look it up?

Mar 24, 2009 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

Dialing


Use the following steps:

1. Press the program button on the handset.
2. Use the up/down arrow keys until you see dial mode.
3. Press the select button and use the up/down arrow keys to change it to pulse.
4. Press the select button. You will hear the phone beep which indicates it has been changed.

Dec 26, 2008 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

Dialing sounds like rotary and will not allow extension choices


Since you neglected to specify the model of your VTech 5.8GHz phone I can only suggest you enter it into the search box here to download a copy of the manual to see how to switch from pulse to tone dialing.

Oct 11, 2008 | Vtech 5.8GHz Cordless Phone with Digital...

Not finding what you are looking for?
Phones Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...