Question about Video Game Consoles & Games

2 Answers

My Super Nintendo has a Coax output. My tv only takes component cables. What can I do so that everything will work?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 11 Answers

You can also hook up your SNES to the coaxial input to a VCR or modulator that you can get at retail stores then run the RCA cables to the TV set. From that point it's a matter of selecting the input with whatever remote, or making sure the modulator is plugged in. I use one similar to a Philips P71153.

Posted on Mar 14, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 275 Answers

Easy!! Im a game collector and i still have a SNES. The solution is simple

If you have a digital box then that means that a cable goes to the box and from the box a cable goes to your Tv. What you should do is unscrew that cable that goes to your Tv and you will screw the SNES coax cable notice that the SNES cable has and input coax cable entrance aswell so you can screw the Tv cable back in to it so you wont miss watching your fav channels after you finish playing awesome classic games on the SNES

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The connection for input from tv aerial to tv is broken


Your Super Nintendo has two outputs, Unless you have the Mini Super Nintendo.

But since the mini is rare lets stick with the regular one, If you are talking about the cable that plugs into your television, The one that plugs in to coax (where the cable box would go) Should look like a black cord with a black or gray box on the end and screws onto the back of the television,
If thats the part thats broken have no fear, There should be another input that looks like (`````#``````) (_______) Im not an artist sorry lol, Anyways this cord has three wires on the end red, white & yellow.
The mini if im not mistaken only has one output, Anyways if you have a Gamecube or Nintendo 64 that cord will also work on the Super Nintendo.
Also make sure when plugged in and turned on that there is a small red light on the front indicating that it's on. If you need a wire you can get one here http://www.amazon.com/Nintendo-AV-Cable-Super/dp/B000035Y6B/ref=sr_1_1?ie=UTF8&qid=1286967890&sr=8-1
Amazon has them for around 5 bucks including shipping.

Oct 13, 2010 | Nintendo Super NES Console

3 Answers

Problem with video signals through AVR-4800


Pic of product.


1243269.jpg
Owners manual

I'll be back after I study it, if problem persisit
Check monitor 1 settings in the on screen display on tv for me
Cheers
S.

Jan 13, 2008 | Denon AVR-4800 Receiver

1 Answer

No colour


Hi, Definitely a TV issue for me. Changed Wii to another input on TV and resolved situation. Need now to check how to get my TV to recognize colour on AV2 & 3 because I prefer to keep DVD input as AV1!

I had to use the (RCA) video inputs and not the component inputs. These are the ones made for video games. If you want to use the component input (Component cables are Red,White Red, Green, Blue). If you don't have any, you should be able to purchase them at your local electronics store like Radio Shack or Best Buy. Hope this helps, read below:

TV (This is your cable connection or TV; coax)
Component 1 (Must use component cables for this input/output; Red and White for audio, Red, Blue, Green for Video)
Component 2 (Must use component cables for this input/output; Red and White for audio, Red, Blue, Green for Video)
HDMI 1 (HDMI Cable)
HDMI 2 (HDMI Cable)
Video 1 (Must Use RCA cables, or RCA jacks; Red and White for Audio, Yellow for Video)
Video 2 (Must Use RCA cables, or RCA jacks; Red and White for Audio, Yellow for Video)

Sample of Component Cables:
http://www.tigerdirect.com/include/AddCartfromGallery.asp?EdpNo=245214&csid=ITD&Sku=C184-27083&imgcart=1

Oct 07, 2010 | Nintendo Wii Console

1 Answer

I have power to my super nintendo but no picture


One of my favorite systems!!! Super Metroid!!! 100%!!!! Wicked awesome!!!

If you have it connected throught the Coax (round screw on cable with a wire in the middle) make sure your connections are tight and your TV input is on the correct one.

If it's through RCA ensure your tv is on the right input.

If you have a coax and no rca, RadioShack sells universal cables for SNES, N64 and Wii all in one. Try purchasing one.

Good luck and please rate my solution accordingly.

V/r,

Coldissickofman

Jan 23, 2010 | Nintendo Super NES Console

1 Answer

I have recently switched to a Dual receiver from Dish network...I have a coax connection to my Sony but cannot find the way to change the input to find the signal from the coax cable. The TV will not take...


We would be happy to help get that fixed right away. Thefirst thing we want to ensure is that all connected equipment is on. Since we know you are using a coax cable to connect the receiver toTV1, check the receiver's back panel for the output name. If your receiver hasa "TV CH 3/4 out":Tune TV to channel 3 or channel 4, if it is labeled "Home Distribution": TuneTV to channel 62 or 75. We also want to ensure that the TV and thereceiver are connected properly, please visit this link to for moreinformation: http://www.dishnetwork.com/SupportSection/setup-receiver-totv.Once we have made sure everything is connected properly, unplug receiver for 10seconds then plug it back in, this will reset the receiver. If we are still notgetting a picture connect another component (VCR, DVD Player, etc.) to the sameTV, using same cable, same input, and same channel to see if it works. If youget a picture with the other component give us a call at 1-800-333-DISH (3474)for some additional troubleshooting. If it doesn't work with the othercomponent then replace the cable that was used.

We hope these steps resolve the issue. We want to thank you for being a valuedDISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jan 18, 2010 | Sony FD Trinitron WEGA KV-36HS500 36" TV

1 Answer

Have an RCA F27636BC TV. Can u hook a DVD player


How to hookup TV

If you have a TV with only a single coax input and you want to hook up components like DVD players and VCRs, here's how to do it.



What you need to connect your DVD player or game players to a TV that only has a VHF/UHF 75-ohm F-connector ("coax antenna input").

1.) RF Modulator with Stereo Audio Inputs.



2.) 6 foot long coaxial cable with male "F" connectors. This cable goes from the modulator to the TV. The modulator also has a coaxial input to plug in your antenna or your VCR.



3.) 6 foot long Video and Audio Cables with "RCA" plugs. The cables connect the yellow, red and white outputs from your DVD or game player to the yellow, red and white inputs of the modulator.





Works with X-Box, PlayStation, Nintendo or other devices that output audio/video via the RCA plugs and you want to connect them to your coaxial only TV.

Nov 24, 2009 | RCA F27636BC 27" TV

2 Answers

Nintendo not working with flat screen tv


The RCA red/white/yellow output of the SNES will plug into any similar input on your TV. If you're missing that cable, do a search on 'super nintendo cable' and you can buy one.

If your TV has only HDMI and no component inputs, then Belkin makes an adapter for that.

You old zapper gun won't work on a LCD screen because the refresh rate of the TV is too fast,so no Duckhunt for you.

Oct 22, 2009 | Televison & Video

1 Answer

No input from audio/video 2 l.being fed from super nintendo coax cable.


You might need to replace you cable for the super nintendo

Jun 30, 2009 | Starlite F1310ATVD 13" TV

1 Answer

Snes screen jumps on certain tv


Okay, what I would try is hooking up the snes using the n64 cable. right next to the rf slot in the back of the super nintendo is a slot thats the same video output as the n64 you can plug in the rca cables from it and see if they work

Feb 27, 2009 | Nintendo Super NES Console

2 Answers

No HDMI video output from AVR-588 receiver to plasma TV ???


the avr-588 apparently cannot carry sound via hdmi - don't know why; just what i found out from the geek squad at best buy; solved the problem by connecting optical cable from cable box to receiver; be sure to change the input on the receiver for opt-2 (system setup >2 inputs) to correlate with tv

Feb 16, 2008 | Denon AVR588 Receiver

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Video Game Consoles & Games Experts

Josh Whitehead
Josh Whitehead

Level 3 Expert

1148 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Brad Brown

Level 3 Expert

15107 Answers

Are you a Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...