Question about Dishwashers

1 Answer

Dial Timer sticks between wash or rinse modes

Bosch dishwasher model # SHU3035UC/U12
Timer is sticking between the wash and rinse cycles and must be
moved manually to complete the cycle.

Is there a diagram available that would assist me with replacement?

What is the cost of the timer and is it available online?

Thank you.

Posted by on

  • alison_tregl May 14, 2009

    i have the same problem with my hotpoint the dial stick but thermostat is fine

  • Anonymous Mar 22, 2014

    SHU3035uc/u12

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Hello. Is the water getting hot? Usually the timer won't advance because it isn't getting a signal from the thermostat that is on the bottom of the tub, so it thinks that the water isn't hot enough to go through the rest of the cycle. That is if the water is hot. If it isn't hot then you may need a new heater. You may or may not need a new timer. Try the thermostat first because that is usually the thing that goes out and it is less expensive than the timer. You can order it from www.coastparts.com or www.marcone.com .
Let me know if you need anymore help.

Posted on Dec 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix the heater in my Bosch shu5306uc / u12?


SHU5306UC-12 BOSCH DISHWASHER Manual - Sears ...

www.searspartsdirect.com > Kitchen Appliance Parts > Bosch Parts
Download Manual for Model SHU5306UC-12 BOSCH DISHWASHER.Sears PartsDirect has parts, manuals & part diagrams for all types of repair projects.

Aug 01, 2015 | Bosch Dishwashers

1 Answer

Timing cycle not working. Washer continues to run in 1 cycle. Will remain stuck in wash cycle and contiunue to run. If moved on to rinse cycle it will again stick and not advance.


Hello,

Welcome to FixYa.

Based on your description " Will remain stuck in wash cycle and continue to run. If moved on to rinse cycle it will again stick and not advance.
"

I suspect the thermostat isn't satisfied when heating the water, hence it get`s hung up trying to heat in the part`s of the cycle it`s called for.

It very well could be caused by a faulty flow switch, NTC or heater as well but not very likely.

I'm basing this on the most common issues and it is a generalization, but if you provide a model number I can speak directly about your machine.


Model and serial are attached to the right hand side of the door,

i.e.

macmarkus_310.jpg


The dishwashers made by Bosch with a rotary dial timer have very few if any, issues with the actual timer or element but they do with the thermostat within the door panel.

If it ( the thermostat ) is not satisfied the water may heat but not be indicated via the thermostat, hence timer will not advance.

Here`s what you can try. If you have any hesitation or reluctance to service this yourself please call in an authorized B/S/H/ ( Bosch/Thermador/Gaggenau ) appliance technician.

**Turn off the breaker at the service panel before attempting any service suggested **


  1. You will require a #20 torx screwdriver to remove the door panel by taking out the screws around the panel, except the ones along the top ( watch the edges they are very sharp )

  2. Once the panel is removed you should see the thermostat over by the detergent dispenser clipped to the inner door, remove it and test it. You`ll need a ohm meter/multi-meter plus a lighter or match to heat it up to see if it open`s & closes.
Example...

5e74230.jpg
**NOTE** it can occur the thermostat can become loose and detach from the bracket which holds it in place, this too can manifest in the sysmptom of the timer not advancing.

Let me know how you make out and what you find.

Thank you for choosing FixYa and Good luck.

Regards,

Macmarkus :)

Feb 16, 2011 | Bosch Dishwashers

1 Answer

Bosch SMU7052UC gets stuck in wash cycle. Pressing alot of buttons, on/off, I can move it to rinse where it sticks again. No drying either. Any suggestions?


I have a 10 year old Bosch SMU 7000 and the drying function has ceased. Dishes are wet after all cycles. From what Ive read this isn't worth fixing because Bosch are so difficult to get into.

Jan 23, 2010 | Bosch 24 in. SMU70 Built-in Dishwasher

1 Answer

Timer (cycle knob) gets stuck on occaision and


possible that its the timer more likely an internal blockage main wash water level not being reached and activating heater if the water does not reach temp selected for any reason the appliance will stick at the heating phase also if your dishwasher is getting old over 10 years wiring loom in door may be breaking down, will need service to sort out

Nov 04, 2009 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

STICKS on cycle, wash, etc. If manually moved


Do you mean the timer or control dial sticks. If so then it may be the timer mechanism itself.

Make sure that when you are skipping a turn on the timer that the machine is actually performing that particular task of the cycle. For example if the timer gets stuck before the drain cycle, and you manually skip forward to it, that it actually drains the water out.

If so then it is most likely a worn timer mechanism which sticks.

Ash

Oct 23, 2009 | Frigidaire Dishwashers

1 Answer

Dishwasher stalls


If the cycle doesn't complete, check these:

Water-heating cycle
Timer
Water-heating cycle Many dishwashers heat the wash and/or rinse water to a higher temperature, as the cycle calls for it. In these cycles, the dishwasher pauses after it has filled with water, waiting for the water to reach the pre-set temperature. What happens next, depends, as follows:

  • On some units, the pause is timed and the unit continues after the allotted time.

  • On others, the cycle can't continue until the water reaches the higher temperature. If you have this type of dishwasher and the water isn't being heated (say, because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues. When you repair the heating-system problem, the "cycle problem" is fixed too.

Timer Timers don't often fail. But if every other part of the dishwasher seems to be working properly and the timer knob seems to be stuck in one place--doing one function continuously--the timer may be at fault. Dishwasher timers can't be repaired. If yours is defective, replace it.


May 31, 2009 | Bosch SHU4006 Dishwasher

1 Answer

Bosch dishwasher timer sticking


I have been told to replace the timer which I am looking to do the same to my machine!

Mar 24, 2009 | Bosch Dishwashers

1 Answer

Bosch dishwasher timer freezing


There is a recall on the control board of many of these models, butyour problem is likely not related. It sounds like a plugged drain system or a possible bad drain pump. That's why you are hearing the pump running constantly. I have written a guide to help. It is here. Thanks!

Mar 24, 2009 | Bosch Nexxt 300 Series WFMC2201UC

1 Answer

Bosch SHU3322uc/u12


Hi Russellpaola


it sounds like to me that the water valve is sticking open. you should have it replaced

plz let me know if this helped
brent

Sep 08, 2008 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

Won't complete the cycle


Try using a quick cycle and see what happens. Don't use sanitize or any extra heat cycle. Sometimes during sanitize high temp rinse or other cycles the timer motor is stopped until the water heats up. The sensor could be defective. Not all machines do this and I'm not real familiar with your particular one.

Jul 03, 2008 | Bosch 24 in. SHU43 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Brad Brown

Level 3 Expert

15133 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...