Question about Audio Players & Recorders

1 Answer

Onkyo tx2500 mk2 only works on mono - Audio Players & Recorders

Posted by on

  • Anonymous Feb 28, 2009

    My Onkyo tx2500 mkII has the same problem, but intermittently. In my case, the two tape monitor buttons on the far right are the problem, or more specifically, Tape 2 Monitor. I notice that if I wiggle the button around, the unit will recover its stereo potential. I'm guessing that the accumulated interior dust (which I've blown out after opening the case up) contributed to this. I still have the problem, but it's less frequent after the cleaning.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Onkyo tx2500 mkII has the same problem, but intermittently. In my case, the two tape monitor buttons on the far right are the problem, or more specifically, Tape 2 Monitor. I notice that if I wiggle the button around, the unit will recover its stereo potential. I'm guessing that the accumulated interior dust (which I've blown out after opening the case up) contributed to this. I still have the problem, but it's less frequent after the cleaning.

Posted on Feb 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a new Onkyo TX-SR508 receiver. When listening to FM radio the audio cuts out repeatedly for anything from a few seconds to a minute. Power fluctuation is very unlikely to be the problem. Signal...


Does the display show "tuned" or "FM Stereo"? This would normally indicate a good reception. The tuner has a signal level threshold and if the signal gets to week, the receiver mutes to prevent noise in the speakers. Swithing to mono make reception less intolerant. Does the problem also occur, when you switch to mono?

Jul 14, 2010 | Onkyo Audio Players & Recorders

1 Answer

One speaker only works in Mono mode


I would be checking the set up mode , you might have it set to left or right channel only , but in mono mode both speakers will come on through one channel

May 25, 2009 | Onkyo TX-SR875 Receiver

1 Answer

Onkyo TX-SR701 no Digital output sound!!


befor go to any direction please repeat your system setup as manual told you(for digital output setting)

Apr 09, 2009 | Onkyo TX-SR701 Receiver

1 Answer

Unsure of audio setting using Onkyo TX-SR606 connected to PS3


The PS3 should default to the DOLBY DIGITAL sound output so your ONKYO should be setup to the Digital input, TV logic is a matrix similated multi-channel and I doubt if any PS software is in the DTS audio format, look at your game software disc`s and they will inform you of the audio capabilities.

Feb 20, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Can't connect subwoofer to onkyo av receiver


you would need a y jack to connect those to the receiver

Feb 16, 2009 | Onkyo HTR500 Receiver

1 Answer

Clicking noise from Onkyo TX-SR606 during television broadcast


I seem to recall a sub-menu setting having to do with "auto shut off" or something like that.

My receiver is packed up, ready to take to Fry's, or I would find that submenu for you.

Jan 04, 2009 | Onkyo TX-SR606 Receiver

1 Answer

My Onkyo TX SV 535 Surround Sound wont work


when the stereo or mono listening mode is selected only front speaker and subwoofer produce sound--------make sure that speakers are configured correctly.
and you select surround sound in listening mode.

Aug 17, 2008 | Onkyo TX-SV535 Receiver

2 Answers

Onkyo Amp


Set your input to the amp at mono.Then check levels again.If it is still low you have a prob w/amp circuitry

Oct 16, 2007 | Onkyo TX-SR604 Receiver

1 Answer

Onkyo receiver playing in mono only


sounds like a reception problem. Is there a visual meter for the reception? Check your antenna.

Feb 02, 2007 | Onkyo TX-8210 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98829 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69804 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...