I have just bought a Fuji 1gb xD memory card and when I insert it into the card slot in the Lexmark P4350 it gives the message "Memory card problem" and will not read the images on the card. I have checked the card in another card reader, and the Lexmark reads a Fuji 16mb xD card correctly. Any suggestions as to why it won't read the 1gb card?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is more of a general step that usually works with a lot of things, but try turning it off then on again with the memory card still inserted. If it still fails to mount & format it, try formatting it with another device if you have one.
Was your Lexmark P315 printer able to detect this particular memory card before? Try to re-insert the card - it could be due to a slight communication problem. Have you tried inserting a different known working compatible memory card into the printer's card slot? This could be due to faulty memory card.
Also, please refer to Memory Cards Supported by the Lexmark P315 Photo Jetprinter.
Here's the list of memory cards that works with the Lexmark P915 printer:
CompactFlash I & II SmartMedia Card Sony Memory Stick, Memory Stick PRO Secure Digital (SD) Card MultiMediaCard (MMC) Microdrive 4 Built-in Card Readers xD Card Sony Memory Stick Duo (with adapter)
To access the memory card reader without using the software provided, follow the steps below. If no card is inserted, the green light on the card reader will be on. Insert a memory card. • Insert the card with the brand name label facing up. • If there is an arrow on the card, make sure it points toward the printer. • If needed, make sure you connect the memory card to the adapter that came with it before inserting it into the slot. Wait for the light located to the right of the slots on the printer to come on. The light blinks to indicate the memory card is being read or is transmitting data. • The printer recognizes one memory card at a time. If you insert more than one memory card, a message appears on the display prompting you to remove all memory cards inserted. • If a USB flash drive is inserted together with the memory card, a message appears on the display prompting you to choose which memory device to use. When reading of images is complete, the number of photos found appears on the display. Then you can make your selection and print. these are the types of memory card supported by you printer. xD-Picture Card • Secure Digital (SD) • Secure Digital High Capacity (SDHC) • Mini Secure Digital (with adapter) • Micro Secure Digital (with adapter) • MultiMedia Card (MMC) • Reduced Size MultiMedia Card (with adapter) • MultiMedia Card mobile (with adapter) • Memory Stick (MS) • Memory Stick PRO • Memory Stick Duo (with adapter) or Memory Stick Duo PRO (with adapter)
Device cannot detect files on the memory card. Cause The memory card might be missing or inserted incorrectly.Verify that the memory card is inserted correctly.
The files might not be in the correct format.To
print from the device control panel, the files must be in the sRGB JPEG
format. To print other formats, you must use a software program on your
You might have inserted more than one memory card.Only one card slot can be occupied for the device to detect JPEG files. Verify that only one card is inserted.