Question about Office Equipment & Supplies

1 Answer

Hp laserjet 1100 - won't print under Win'98SE i've got this printer and can't use it on a computer under win98SE. under XP works fine! all the ports seems to be bussy, and request to increes the timeout printing. Connectivity: IEEE 1284-compliant bidirectional parallel. i used: - 1 PCI board for extra paralel port (LPT2) - 1 comm adaptor from 9 to 25 db (for serial port) - 1 usb adaptor to 25 db same result: ports are bussy, request to increes the timeout printing...and..nothing else... solutions pls! thank's

Posted by on

  • csi_79 Dec 07, 2008

    thanks a lot!

    i shall try!


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 461 Answers

Try changing the LPT port mode in the BIOS- there should be like SPP, EPP, ECP. As I recall there are different drivers for USB and Parallel and I don't think Serial is supported. If you installed HP drivers, Uninstall and use the Windows drivers.

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP laser jet 1100 will not print


Error indicating that:1.Paper jam.2.Cartridge missing or not seated properly.3.Cartridge access properly closed?action: Refix cartridge properly, check any paper jams in side. No result.. ***remove Formatter & power supply & clean as shown in snap shots.. 11_29_2011_4_30_29_pm.jpg11_29_2011_4_31_09_pm.jpg11_29_2011_4_31_33_pm.jpg11_29_2011_4_31_56_pm.jpgCarefully observe the snap shots..and do the trouble shoot.Best of luck.

Nov 28, 2011 | HP LaserJet 1100 Printer

1 Answer

Five computers networked with Linksys WRT320N router. Operating systems: Win 7.0 on 3 computers (two hardwired)(one laptop - wireless), Snow Leopard 10.8 on 1 (wireless), and XP on one (wireless). Also...


Sometimes this problem occures when you install a later model wireless router.
Try installing the latest Wireless card driver on the XP computer and the LAN card drivers on the other computers except the MAC.

Dec 31, 2009 | HP LaserJet P2015n Printer

1 Answer

Printer not print on win XP


You may wish to work throught the troubleshooter accessible in this link, or check to be sure that you have the most up to date drivers installed for your printer by scanning at hp, (see link on this page)
or following the instructions in this tutorial
or following these MS instructions

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!




Apr 29, 2009 | HP LaserJet 1100 Printer

1 Answer

My hp laserjet 1100 doesnt respond when i try to print


Not sure if this will help but if you right click on the printer and go to properties ( when your in printers and faxes ) and go to the ports tab I think it is and un tick the check box that says bi directional support and try it again.

Also what error are you getting thats printed off ?

what lights are on the printer and where are you getting the driver from, if the disc then try the latest driver from the hp website

Apr 22, 2009 | HP LaserJet 1100 Printer

1 Answer

HP 4050N drops pages when printing from WP4.2 under WIN98se


 
Hi there,
  • Unplug the printer cable from the computer.
  • Unistall the printer drivers from Device manager and also unistall the all the printer appications
  • restart the computer
  • try to download drivers from the website
  • after installing drivers and software it will ask you to connect the printer.
  • then you can connect the printer and and try to Print the test page.
Hope this help. Please Rate My Response! Thanks! 
PREM  

Mar 12, 2009 | HP LaserJet 4050 Printer

3 Answers

How to install hp laserjet p1505n network printer in windows 98


I can not find a win 98 driver for your printer on the HP website. DO yu have the instalation disk that was writen for win 98? If not try installing the printer through  the control panel. Either printers/fax or through install new hardware.The first being the preference. Some of the win OSs have printr drivers already installed.
If this does not work out, then the printer has no drivr available for that version of windows and you ewither have to upgrade to Xp or use a different printer which has a driver for win 98.  


http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us〈=en&product=3435671&

Jan 02, 2009 | Office Equipment & Supplies

2 Answers

Connect printer


XP and Win2000 are the same NT platform and are different from Win98SE and if you have the correct drivers installed for each then a single USB cable is sufficient as long as the printer is pointed to that port/device.

Mar 27, 2008 | HP DeskJet 722c InkJet Printer

2 Answers

Continuous garbage text when connected to pc


In reading this HP forum I have found many other LaserJet 1100 owners who are trying to do the same thing as you.

Many of them recommend various cable solutions from Sewell. When you contact Sewell, make sure to specify your printer model, and ask what specific cables and/or adapters you need to make it work vis USB. They sound quite knowledgeable, and seem to have dealth with this before.

Mar 06, 2008 | HP LaserJet 1100 Printer

2 Answers

HP1100


I am currently using this print server with the HP Laserjet 1100 on the parallel port and it works flawlessly.

Jan 15, 2008 | D-Link DP-G321 Print Server

5 Answers

Cant print from workstations


Try changing the driver for your HP LJP3005 on your XP machine. Use it with the HP LJ Series II driver.

Aug 10, 2007 | D-Link DP-301U (790069251979) Print Server

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98868 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...