Question about LG 42LC2D 42 in. LCD HDTV

Open Question

Service Code for LG 23LS7D

I can get to the screen to input the 4 digit code but I need the code.

Thanks,
Bob

Posted by on

1 Suggested Answer

  • 36 Answers

SOURCE: I need the 4 digit code for my LG 42LD520 in

Here you can find almost all the Universal remote codes
http://kbase.x10.com/wiki/Universal_Remote_Code_List
you can also manually find it follow your universal remote control user guide If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.

  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.

Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Posted on Mar 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The problem is that I cannot change input sources on TV (no remote). The screen says that it must do an auto channel search. I do not have a cable provider/antenna tv channels at home. Help?


Without remote its not possible.
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electro-medical.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Jun 21, 2016 | Flat Panel Televisions

3 Answers

ILO DVDRO4


1 user region code/hacks May 24, 2007
icon_minipost.gifRegion code hack posted by Brushy, May 24 2007:
(1) Turn on Set
(2) Press DVD button on Control
(3) Press OPEN/CLOSE on Control to open tray
(4) Type in 0520 on Control
(5) Press UP: DOWN: LEFT: RIGHT buttons on control
in that order.
(6) Follow instructions that appear on screen and
press 0 (ZERO) on control.
(7) Press ENTER on control
(8) Press OPEN/CLOSE on control to close tray

Jul 04, 2008 | iLO 2600 Television

1 Answer

Have brought second hand Hitachi tv which just comes up that it has no signal. To retune i need a 4 digit code,is there any way i can by pass the code or put in something that the Tv will accept.


Hi Annette.

I'm not sure what level you're needing a code for. If you're looking for unversal remote codes to try to pair a remote to the TV, a listing can be found here
4 digit codes for TV sets including LCD Plasma and Panel TVs GE universal...

I'm not finding anything else about Hitachi TVs and a 4 digit code.

Is this 'no signal' coming in off of a cable, or off of broadcast TV? You may also want to check if there are multiple inputs and you're on a not-plugged-in input. For instance, the TV may have 3 HDMI inputs and a set of component video inputs. If, say, your cable box is connected to HDMI 2 and your DVR is plugged into HDMI 3, then if the system defaults to HDMI 1 when it turns on, perhaps it's showing some error code. You should have some sort of input select function. Try cycling through your inputs to make sure that the set is OK playing from other canned input like a DVD player. If so, then move that input through the imput ports to make sure they work.
If the TV has a direct cable coaxial hook-up, most, if not all cable companies anymore only broadcast in encrypted digital, meaning you'll need a cable box or something like a TiVo with a special cable card to see anything.

More specifics would need the make / model / year of the set.
Hoping this helps!
D

Nov 30, 2015 | Hitachi Flat Panel Televisions

2 Answers

Accidently switched settings to vga . have a black screen now .how can i switch it back


Hi Paul,
There is a key "SOURCE" on the remote control. Press it and there will be a list of inputs. Select the desired input by repeated pressing the source key or by pressing up/down key.

Apr 15, 2015 | Flat Panel Televisions

1 Answer

Just bought a !9" digital flat screen Apex. Hooked it to an indoor HDTV antenna. All I can get is "NO SIGNAL". What do I try next?? Bob E, Technical Dunce over 80.


Bob, If you have an hd ready tv, and hooked up the Ant. then the next thing you should do is go to your menu and select the tv feature and then scan for channels. This should program the channels for you. Most TV setups are like this. You should have a option for cable or antenna/tv input. select Antenna. You r should be good to go once the channel scan is done.

Hope that helps
Dan

Feb 26, 2015 | Flat Panel Televisions

1 Answer

I am trying to figure out how to change the input setting on my Dse G9442 lcd TV using the buttons on the tv itself. My remote is lost and I can't figure out how to select a new input. When I bring up...


To select the inputs, you should have its remote control. There is no input selector buttons at its front panel controls.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability.
Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.
Type in the brand name of your device, in the search box [at the top right] of the display window, and press enter to get all related posts. It will make surf easy
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.

Feb 08, 2015 | Flat Panel Televisions

1 Answer

Sinotec FLAT SCREEn, REMOTE CONTROL rc-n38 4 digit code for all in one remote. WHAT IS THE 4 DIGIT CODE. Cheers


0287,0281,2288. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too
http://remotesearch.blogspot.com/

Apr 21, 2014 | Flat Panel Televisions

1 Answer

Sanyo lcd-32k40 features


  • Model: Sanyo 32K40 Multi System LCD TV
  • World-Wide NTSC/PAL/SECAM Color System - Watch any video signal on this TV!!
  • World-Wide NTSC M, PAL BG, PAL I, Secam BG, DK/ PAL DK TV tuners
  • 32 inch LCD TV with 3 HDMI inputs and PC input
  • USB input for direct media playback
  • 45,000:1 Dynamic Contrast: While viewing either very bright or very dark scenes, it can be difficult to distinguish main images which blend into the background.
  • Dynamic Contrast dramatically mitigates this problem by adjusting the backlight intensity, providing up to a 4X improvement in contrast.
  • 6.5ms Response Time
  • Widescreen 16 X 9 Format
  • World-wide Dual Voltage 110-240 volts 50-60 hertz
  • HDTV monitor (HDTV tuner required for HD reception)
  • This is a multisystem TV. All Multi System TVs in the market do not have a digital TV tuner: What does this mean?
  • To watch digital channels (ATSC Broadcasting in US and DVBT broadcasting overseas) you need a digital source/tuner like a cable box, digital tuner, satellite service, etc.
  • To get the best quality video on this TV you need a source that has a digital connection like HDMI or component.
  • Wide Screen Mode allows you to watch conventional 4:3 aspect ratio broadcasts in wide screen (16:9) mode.
  • Steady Sound® equalizes volume levels so there is consistent output between programs and commercials.
  • Built-in hidden speakers includes 2 (5W x 2) speakers to deliver dynamic sound.
  • Component Video Input offers the best video quality for DVD (480p and 480i), and digital set-top box (1080p, 1080i, 720p, 480p and 480i) connections.
  • PC Input allows you to connect your PC and display the PC screen on your TV.
  • Surround Sound Audio Effect

Mar 04, 2011 | Sanyo 42 in. LCD TV

1 Answer

Screen is black on my Samsung LCD TV


Press your input button for the correct input your using for cable or viewing regular channels.

Apr 14, 2009 | Samsung LN-T4061F 40 in. LCD HDTV

1 Answer

How to hook my directv to digital input to lcd tv j32l637


I don't know what flat screen tv you have,but you must be aware of the coaxial input behind the TV.It could be analog input,digital input and OUTPUT!!
Anyway,if you connect your basic directv box to your digital input,it will not serve you any purpose to get HD channels and you don't have the HD directv box.The TV will not display digital channel for you because if you use coaxial input to TV,you should be under either channel 3 or 4 and be sure either channel had been saved under memory.In order to change channels,you will need to change it from your directv box.
JUST LIKE a VCR connect to TV.TV will be under channel 3 or 4,and you will change your channels from the VCR.Don't forget to scan all the channels from the VCR!
solutiondoct

Nov 11, 2008 | Flat Panel Televisions

Not finding what you are looking for?
LG 42LC2D 42 in. LCD HDTV Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a LG Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...