Question about Clarion Car Audio & Video

2 Answers

I have an error code 6 for a Clarion DRX5675, any fixes?

Posted by on

  • 1 more comment 
  • cmclini Dec 08, 2008

    Unfortunately I thought this was the problem but discs have been inserted correctly, I bought a laser CD cleaning disc and tried it all to no avail. I understand when the power is shut off for instance when a recent diode had to be replaced by the dealer due to recall this causes the error 6 code which requires some type of input on the stereo to erase and allow CD's to be heard. Any other thoughts? thanks

  • cmclini Dec 08, 2008

    yes I did try the reset button for even longer than 2 seconds and when the face plate was re-inserted and a CD was loaded after a couple of seconds and while small L like lights are running across the bottom of the faceplate as in trying to read the CD, error code six comes up. The cd does not have any scratches, was just cleaned and inserted properly. Any other thoughts? Thanks very much.

  • cmclini Dec 08, 2008

    Thank you again for your time and comments.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 290 Answers

Have you tried resetting the unit by pressing the reset button (bottom right, beneath the faceplate) and holding it for 2 seconds?

Posted on Dec 08, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 290 Answers

According to the manual, error code 6 is when the stereo can't read the table of contents on the CD. This could be due to scratches along the inner tracks of the disc, an audio CD-R that was not closed or finished, or the disc is being inserted upside down. If the error code only appears for a single or few discs, chances are it's not an issue with the player, but the disc(s) themselves.

Posted on Dec 07, 2008

  • Tygh Duval
    Tygh Duval Dec 08, 2008

    My best guess is that, somehow, the laser lens assembly in the unit has become misaligned. It's trying to read the CD, but isn't getting the info it's expecting. Unfortunately, I don't think there's much else you can do without a professional repair person's help. I wish I could help more!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jaguar Clarion CD Error code E5


google jaguar clarion cd error code e5

Aug 09, 2014 | Clarion Car Audio & Video

1 Answer

My Clarion BD216 channel up button won't work and the CD player has an error 6 code. Can this be fixed?


It could be, but at this point with a unit of that age, I would just replace it. Not worth fixing vs the cost of a good new radio being at or below $100

Oct 27, 2010 | Clarion BD-216 CD Player

1 Answer

Clarion 12 Disc CD Changer Model # CDC 1255z What


out of focus.
if all of your discs have the same error code 6, it is optical lens problem. have it checked to the nearest service center.

Jun 12, 2010 | Clarion CDC1255z 12-Disc CD Changer

1 Answer

Clarion drx7475 error 6 messages


I had this problem, my boyfriend says you need to warm up the car first, but all I do is really clean the cd before I put in the cd player. Hope this helps.

Dec 25, 2009 | Clarion Car Audio & Video

1 Answer

When i install cd it says error 6 on my clarion dxz465mp


Clarion Audio error codes:

Error Codes:

Error 1 Battery inside CD Changer needs to be replaced.

Error 2 CD error message. Mechanism has as eject problem or takes a long time to select CD.

Error 3 CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.

Error 4 Connection problem. Reconnect the data cable.

Error 5 CD error message. Could not read correct data due to CD ROM.

Error 6 CD error message. Could not read data from disc because it is upside-down.

Error 8 Tape Drive system defective. Eating tape or something wrong with the drive system.

Error 9 Weak RF. Try alternate frequency

Even though it says error 6 is an upside down cd, it just means the disc cant be read. usualy means the laser is dirty, out of adjustment, or not working.

Aug 19, 2009 | Clarion DXZ465MP CD Player

1 Answer

Error 6


Leave the radio powered up for up to 2 hours, the reason for ERROR 6 is the incorrect code has been inputted.

Aug 09, 2009 | Clarion DXZ545MP CD Player

1 Answer

I'm looking for a wiring diagram for a Clarion drx5675 does anyone know where i can find one? Or can someone give me the color coding to the wiring so i know where they go to, thx


Clarion uses the industry standard wiring colors. Not every unit will have all of the listed wires

SPEAKERS:
White = Left Front +
White/Black = Left Front –

Gray = Right Front +
Gray/Black = Right Front –

Green = Left Rear +
Green/Black = Left Rear-

Violet = Right Rear +
Violet/Black = Right Rear –

POWER/ACCESSORY:
Yellow 14ga = Battery Main/Memory
Yellow 18ga = Battery CeNET Power/Memory
Red = Accessory (ignition on)
Black = Ground
Blue = Antenna Turn On +
Blue/White = Remote Turn On (amps) +
Orange/White = Dimmer
Brown = Phone Mute
Orange or Mint Green= Parking Brake Video Lockout
White/Red = CCD (camera) input instant on +

RCA Cables:
Gray = Front Output
Black = Rear Output
Purple = Non-Fade or Subwoofer Output

Feb 21, 2009 | Clarion RAB250D

1 Answer

Error 6 code on clarion drb4675


http://www.clarion.com/us/en/MungoBlobs/691/553/DRB4675(Manual).pdf

page 15

error code 6 - the cd's table of contents cannot be read (for example, disc is upside down or scratched to hell)

try to get another cd to work, or reburn the same cd and see if it works then. if none of the cd's work, maybe its time to call up the service department for clarion (800-462-5274) and see what they can do if anything.

Aug 15, 2008 | Clarion Car Audio & Video

2 Answers

Error code 6 & error code 4


Error 6 & 4 it means laser is not reading the disc and unforutunally you need to replace the pick up laser assy.
You can get it from pacparts.com,but I reccomend you to take to a proffessional tech because this is a "static sensitive" item.

Dec 08, 2007 | Clarion DX-515 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Clarion Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4766 Answers

yadayada
yadayada

Level 3 Expert

67930 Answers

Marco Avila
Marco Avila

Level 2 Expert

56 Answers

Are you a Clarion Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...