Question about Minolta magicolor 3300 Laser Printer

4 Answers

Reset the Minolta 3300 to factory default

Hi I need to reset a Minolta 3300 to factory default.  I do not know how to do this and can't seem to find it on the menu options (we've lost the admin password).

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Minolta Master
  • 1,879 Answers

Have to call minolta service to reset the unit to factory default.

Posted on Dec 07, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 149 Answers

According to minolta you need to contact their technical support ...here is there self hep page which eventually leads you to their support if you go through the self help as if you have forgotten/lost your admin password
http://printer.konicaminolta.net/support/casebase/index.html

Posted on Dec 07, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 162 Answers

Here's the manual - click here

Posted on Dec 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Minolta Master
  • 19,396 Answers

IF YOU WANT TO RESET THE TONER COUNTER, YOU MAY NEED A RESET CHIP ON THIS MODEL, SEE:

Reset Chips : Minolta Magicolor 2400w

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset hp 3015 reset


P3015 printer to factory defaults you need to follow the steps listed below.

First make sure the printer is turned on.
Next push the button labeled menu.
Push the down arrow until you reach the Configure device option. Select this option.
Push the down arrow until you reach the Resets menu. Select this option.
Push the down arrow until you reach the Restore Factory Settings option.
Select this option and the printer will restore to factory defaults.

Jul 26, 2014 | HP CE526AR LaserJet Enterprise P3015d...

1 Answer

Reset nvram


http://www.support.xerox.com/support/phaser-3300mfp/support/enus.html

Solution : Clear Memory and Restore Default Settings on the Machine NOTE:Clearing memory on the machine will remove information from the machine and restore factory default settings. Make sure that all fax jobs have been completed before clearing the memory, or jobs will be lost.
To clear the machine memory and restore factory default settings:
  1. Press the [Menu] button (located below the Display Screen on the Control Panel) until "System Setup" is displayed on the bottom line of the Display Screen.
  2. Press the [Enter] button.
  3. Press the left or right [Scroll] (arrow) button until "Clear Setting" is displayed.
  4. Press the [Enter] button.
  5. Press the left or right [Scroll] button until the option to be cleared is displayed. (Refer to the table below for additional information.)
  6. Press the [Enter] button. "Yes" will be displayed.
  7. Press the [Enter] button again to confirm.
  8. Repeat steps 3 through 7 to clear additional items.
  9. Press the [Stop / Clear] button to return to Standby mode.
Clear Memory Descriptions Options Description All Settings Clears all of the data stored in memory and resets all of the machine settings to the factory default settings. Fax Setup Restores all of the Fax options to the factory default settings. Copy Setup Restores all of the Copy options to the factory default settings. Scan Setup Restores all of the Scan options to the factory default settings. System Setup Restores all of the System options to the factory default settings. Network Restores all of the Network options to the factory default settings. Address Book Clears all of the fax number and e-mail address entries stored in memory. Sent Report Clears all records of sent faxes and e-mails. Fax Rcv Report Clears all records of received faxes. New Scan Report Clears the information about network scan sessions in memory.

May 21, 2014 | Xerox 3300MFP/X new 3300mfpx [a51t732]...

1 Answer

Mc3300dn print drivers


What version of Mac OS X are you using? You can find it by choosing "About This Mac" from the Apple menu.

Dec 24, 2013 | Minolta magicolor 3300 Laser Printer

1 Answer

How do i perform a cold reset on a laserjet 2600n printer


Via the Control Panel: The Resets menu makes it possible to reset factory settings, disable and enable Powersave, and update the printer after new supplies are installed. Configure device menu The Configure device menu makes it possible to change the printer's default print settings, adjust the print quality, change the system's configuration and I/O options, and reset the printer's default settings RESTORE FACTORY SETTINGS :Makes it possible to clear the page buffer, remove all perishable personality data, reset the printing environment, and return all default settings to factory defaults. Press Menu or (Select) to enter the MENUS.
  1. Press (Down Arrow) to highlight Configure device menu .
  2. Press (Select) to select Configure device menu
  3. Press (down arrow) to System setup menu
  4. Press (select) System setup menu
  5. Press (select) Resets menu
  6. Select RESTORE FACTORY SETTINGS.

Dec 03, 2010 | HP LaserJet 4600dn Color Printer

1 Answer

How do I reset a Xerox Phaser 4500 Centreware password to factory default.. or what is the factory default password? I have on which has been changed and nobody seems to know the PW anylonger


this should restore it to default.


By default there is no username or password required to access CentreWare Internet Services. If a username and password have been configured for CentreWare Internet Services and you do not remember the username and / or password, reset the printer to factory defaults (NVRAM reset).
To reset the NVRAM, go to the front panel's Main Menu:
  1. Select Troubleshooting, then press the OK button.
  2. Select Service Tools, then press the OK button.
  3. Select Reset NVRAM, press the OK button.
  4. Select Reset NVRAM and Reset Printer NOW, then press the OK button to reset all the settings to their factory default values.


Mar 03, 2010 | Xerox Phaser 4500 Printer

3 Answers

How can I rest the admin password on Bizhub c250


still having trouble..if default password didnt work for you then try reseting it to default password by:
1) Utility/Counter
2) Details
3) press STOP zero zero + STOP zero one
and now your in Tech Mode
4) same page press STOP + Zero + C
5) modify admin password and retype and then exit
6) do not DO NOT touch any other options unless you know what your doing..you can lock the machine and would be able to work..rate if this helped you out

Feb 24, 2010 | Konica Minolta bizhub C250 All-In-One...

3 Answers

Konica Minolta Di 3010 - cannot clear trouble message


one thing you can try since you have already removed the fuser you can probably do this but i would not recommend it unless you are familiar and comfortable with the components of the machine turn the copier off remove the back cover you will see in the middle of the machine a metal cover with 4 or 5 screws, behind this cover is the main board it has many wires going to it through out the machine...remove the cover so u can see the board and all its connectors on the board there should be a little black button... turn the machine on press this button and the code should reset. If the code does not reset then the thermistor or thermostats are bad and the fuser needs to be rebuilt. as for the password 8 zeros or 1-8 are the defult passwords for the machine. you can also try 1247....

Apr 03, 2009 | Konica Minolta Printers & Copiers

1 Answer

Documax 3300 Printer reponse


Hi again,

Appreciate the direct "Ask Me".

The RAM Map is basically like the built-in memory of your mobile phone that holds your personalized settings/configurations (profile). Like in some phones (and even computers - personal settings), these settings from time to time do get mixed up. Doing a general reset then removes these personalized settings but reverts the unit back to factory default.

As outlined in here, it is relatively easy to reset, however, an initial step is required so that you could save your settings/configurations. An excerpt that addresses your concern:
  • You cannot do a default reset in the fashion as you would an XL Series printer. If you desire to reset the Non Volatile Ram in the Documax 3300 printers, you must first gain access to Menu 10.**Before resetting it you may need to be print the profile! To Print a Profile:
  1. Take the printer off-line
  2. Open the keypad door.
  3. Press the Feature UP key until "Print Profile" is displayed
  4. Press "Enter"
  • This will print the current profile only. You must repeat the above steps for each profile, after closing the keypad door.
  • To clear the printer buffer and reset all features in RAM, turn the printer off then turn it back on.
  • To reset all profiles to factory default, perform the following:
  1. Load paper into the printer
  2. Place the printer online
  3. Press and release the Profile key
  4. Press and release the Park key
  5. Open the keypad door and use the next menu key to scroll to menu 10.
  • Reset Printer NVM should be displayed. Press Enter. You will have to set any features that you have changed from factory.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Nov 11, 2008 | Printers & Copiers

1 Answer

Hi. I have a Konica Magicolor 3300, and it always prints a Startup Page each time I turn it on. Could you let me know how to disable Startup Page in Konica Magicolor 3300? Thanks.


It is under the Administrator Menu:

From an Idle state, Press:

Menu

Next - you should see "configuration administration" on the display.

Press the left or right arrow key until "Administration Startup Options" is displayed.

Press "select"

Press the left or right arrow key until "do start page" is displayed.

Press select.

Press the left or right arrow until "no" is displayed.

Press "online" (save changes *no? should be displayed)

Press "next" (right arrow) "save changes? yes" should be displayed.

Press "select" to save settings.

Press the select to reboot the system.

This came directly from the operators manual, and may differ depending on the firmware version of your machine. If this does not work, please let me know and I will research it further.







May 25, 2008 | Minolta Printers & Copiers

1 Answer

Resetting password


go to setup>and go to maintanance -->there is a option restore default>select that and after some time do power cycle>and rste me solved if its helps

Nov 15, 2007 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Minolta magicolor 3300 Laser Printer Logo

Related Topics:

972 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

john archer

Level 2 Expert

186 Answers

Are you a Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...