Question about Linksys Wireless-N WRT150N Router

2 Answers

I NEED TO TYPE IN THE PASSWORD

I AM TRYING TO CONFIGURE THE ROUTER BUT IT IS ASKING FOR A PASSWORD. WHERE WOULD i FIND THAT? I HAVE TRIED USING THE CDROM SEVERAL TIMES BUT IT DOESNOT DETECT THE ROUTER. I HAVE NOW INSTALLED IT WITHOUT THE CDROM BUT CANNOT CONFIGURE WITHOUT A PASSWORD. HELP!!!1

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,879 Answers

Reset the router (press and hold reset button located at the back for 30 secs)

access the router hard-wired using a browser. key-in 192.168.1.1 at the address bar.

default username (leave it blank) & admin for the password

Posted on Dec 07, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 162 Answers

Reset the router then use the cd again

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Zyxel P660HW-T1 v2 and when trying to use laptop wirelessly, the internet connection keeps dropping. While connected to the router by ethernet cable, internet is fine. All was working fine until...


For that you need to change wireless channel type in router. You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless->wireless channel type to 3 or 6 or 11 then save settings and restart router. . Let me know if you need further assistance. Thanks for using FixYa.

Jun 22, 2011 | Zyxel Prestige 660HW Wireless Router...

2 Answers

To change password


Hi,

Open new internet explorer tab and type

http://192.168.1.1/ (If it doesn' ask for username and password try below address)
http://www.routerlogin.net

Ckeck if it asks for username and password

If ask give

username : admin
password : password

Now will be navigated to router configuration area

Now our next job is to navigate to wireless settings ( left side)

security option click on wpa/wpa2


now on passphrase enter new password

click on save button to save the settings

That'a all

Note: all devices that is connected to router via wireless will loose the connection . Now you have reconnect it using the new password

Thanks

Vote me if you are satisfied with my answer







Mar 22, 2011 | NetGear WGR614 Wireless Router

3 Answers

My network setup is asking for a pin number that is on my router. Obviously there is no pin number for this particular router and my network is asking for a 4 or 8 digit number. What do I do?


If its asking for a pin number I would check the sticker on the bottom of the router. it may have the router PIN you are looking for. If not trying typing in your internet browser address bar 192.168.1.1 and find the network settings and see if there is a pin set up, if so write it down or clear it to have no PIN

Feb 28, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

Net gear router configuration


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.

Nov 10, 2010 | NetGear WGR614 Wireless Router

1 Answer

My linksys connection will not work for any reason.I tryed reseting the router and unplugging it.But its still not working.What might the problem be and how can i fix it?


For that you need to configure router again. Follow below procedure. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.

Oct 10, 2010 | Belkin F5D7234-4 Router

1 Answer

My router is powered up but not showing wlan illuminated, thinkmy child may have reset it at back please help


For that you need to configure your router.Follow below procedure to configure it. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.

Sep 15, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Was trying to connect my new router with my internet company we couldnt get it to connect we tried with ethernet cables and then without them


For that you need to configure your router. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Also enable DHCP so you can ip address from router. Let me know if you need further assistance. Thanks for using FixYa.

Sep 09, 2010 | Routers

1 Answer

Need to configure modem manually as per ATT. Thank You


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.

Sep 03, 2010 | Routers

1 Answer

The DVD instructions ask for Cnnection type, username password, ip address and more. THe internet company says that the modem handled this information and the router suppose to catch the ip from the modem....


For that you need to access your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
For belkin router http://192.168.15.1
or
http://192.168.2.1

If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Then WAN settings configure your router as pppoe connection then add user name and password then Enable DHCP then save and restart router.
Let me know if you need further assistance.
Thanks for using FixYa.

Dec 10, 2009 | Gateway 802.11g Wireless DSL/Cable Router...

1 Answer

Configuring the wireless router


goto start>>
click run
type cmd
type ipconfig
check what is ur default gateway
then goto internet explorer
type the default gateway in address bar
YOUR belkin router homepage will come up
If it asks you for any username and password
U will have to contact belkin to get that...
after entering the username and password
u will be able to check the configuration setings
Use one of your static IP's instead of Using the dhcp server to assign them.

If this helps please be sure to rate it!!

Jan 13, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

Not finding what you are looking for?
Linksys Wireless-N WRT150N Router Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...