a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to an Expert (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
SIMPLE ,READ THE USER MANUAL , SWITCH ON THE CAMERA AFTER INSERTING THE BATTERY IN THE RIGHT POLARITY. PRESS THE MENU BUTTON AND SET THE CAMERA TO AUTO MODE. START CLICKING PHOTOS AND YOU WILL IMPROVE OVER TIME AND USE. REGARDS PLZ. RATE THIS
The Olympus Stylus 7010 has a rechargeable lithium ion battery that will eventually wear out-- your battery could be at the point where it does not hold a charge any longer. Have you previously noticed a degradation in battery life? If so, you can try replacing the battery or connecting the camera to a constant power source (like an AC adapter) to troubleshoot.
First, Ascertain that an observation has least caused the device from fucntioning. For example, observe the device for physical malfucntions, ascertain that battery resources has least been malalliged to prevent regular functionality. Replace batteries that are depleted of capacities taking care to place the appropaite directions usually demarked on the battery and within device compartment area. Second, remote control device require appropiate direction toward receptable display device to capture signals. For example attempting to transmit remote signals from distance extrenously without receptables reach is least attainable. Also, the remote control has a transmittion sensor area also similar with the receptable display device. Malalligning either transmitter to receptables least captures signal responses when any made available. Refer to the devices user guide attain diagnostic materials amonsg pertinent details on attaining an improve television experince.
If you are using new batteries, then there is a problem on one of the circuit boards that is causing the system to pull too much current and it is exhausting the battery.
Most often, I have seen batteries that go defective in the way they can no longer hold proper charge no matter how much they are recharged. At this point you have to replace the battery with a new one.
The average lifespan of these camera batteries is about 2 to 3 years. If the batteries are stored and not used, they can become weak to hold charge after about 6 months. They go through a chemical degradation over time.
Try cleaning the connectors inside the battery compartment, top and bottom and then replace the rechargable batteries with disposable alkaline batteries and try again. If this works then the problem may be the rechargable battery pack.
I don't have a solution, but I have the same problem. Actually, I have that problem after I get it to turn on. The first part of the problem is that I can't get mine to turn on - with a fully charged and fucntional battery - without removing and rplacing the battery and switching on/off numerous times. Then, when it does come on, i get the exact white screen problem you decribe in your post above.