Question about Koss KS3102 System

1 Answer

My kenwood surround sounds fuse blew and know theres no sound?

I have a kenwood sorround sound that i just got from a friend. i hooked it up and it worked realy good.. i wanted to hook up a nother speaker and when i did that i touched the 2 speaker wires together and i blew the fuse. so i toook it apart and wraped the fuse with a piece of aluminalfoil and put it bak together becuas.e i did not have any fuses.. i pluged it in the wall and it started smokin so i unpluged it real fast and left it unpluged for a few minutes and pluged it back up and it came on but there is no sound.. everything works but u cant hear no sound wat so ever.. i need some help cause i have no clue wat im doing

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 201 Answers

Never bridge a fuse in your life again this is the wrongest thing to do.. Check first there should be IC's skrewed onto a heatsink, some surrounds uses Transistors you should be able to see the burnt ic it will be cracked or burnt, replace that replace fuse if fuse still blow then replace all the ic's on heatsink..

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Don't know how to hook up kenwood ka-994


Hi,

Check the bellow link for the user manual of kenwood KA-994. In page number 4 of the user manual You can see how to make the connections to the receiver


Manual

Ajin

Mar 09, 2012 | Audio Players & Recorders

1 Answer

No sorround sound coming out of speakers out both left and right


I just repaired one for slow start .recapped the whole power supply board and now starts first go.I will check it out next week and post what I found

May 14, 2010 | Sherwood Audio Players & Recorders

1 Answer

Trying to connect a surround sound system to my lc320em9b but no sound.


SORROUND SOUNDS SYSTEM ON TV DEPENDS ON THE TV STATION UV OPEN,U CAN HAVE IT IF UR WATCHING STATIONS HAVE SOUND SURROUNDS ON A PLAYER,W/ SOROUND

Feb 28, 2010 | Emerson LC320EM9 32 in. LCD HDTV

1 Answer

I have a new dell inspiron. I just purchased Logitech x-540 surround sound speaker system. The right front, left front, and center speakers don't work. Everything seems to be hooked up right. Any ideas. Is...


Yes there has to be a configuration for the 5.4 surround sound... look if the hardware came with a CD to update the sound driver. or Check if the its correctly configured. on the control panel then click Sound, then depending what windows you have have to lookk for the configuration or properties area and configure as 5.0 or sorround etc.

Feb 21, 2010 | Logitech X-540 Multimedia Surround Sound...

1 Answer

No sound from Surround speakers of my onkyo reciever


Check speaker wireing make sure all positive and negative connections are correct. What cable are you running from tv or DVD player.check to see that wireing is correct on receiver for sorround speakers. Run audysee sound calibrator set up. Make sure correct settings for sorround sound in bluray player/DVD player

Sep 13, 2009 | Onkyo HT-S990THX System

1 Answer

No user manual


Hi there,

All speaker cables go into the surround sound system, they should be colour coded, then phono cables into the TV or just the the normal green audio cable into the green audio hole on the computer

Feb 18, 2009 | Durabrand 5.1 Surround Sound Computer...

1 Answer

Kenwood VR6070 speaker/amp problems


unit needs repair. Look at the b speakers. Conect a speaker or two to the B position. If you have no sound than your surrond sound is ok and the unit is bad. Sound comes directly into the b speaker and not threw the surrond system. My 6070 has a cold start up problem. no sound. time to purchase a new one. to costly to repair.

Dec 30, 2008 | Kenwood VR-6070 Receiver

1 Answer

Receiver compatible with tv


yes digital suround sound is optical spdif k like coxial digital if it dont have analog outs or does it have headphone jack in front run a eth in mini jack to rca offf that to video 1 of sterio ok

Feb 10, 2008 | Televison & Video

1 Answer

Sorround speakers


surround speakers will only function when the video that is being played is encoded with surround sound. like 5.1. otherwise it will only play in regular stereo mode.

Jan 09, 2007 | Panasonic PT-51G44 51" Rear Projection...

Not finding what you are looking for?
Koss KS3102 System Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Koss Audio Players & Recorders Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Koss Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...