Question about Actiontec GT704WG Wireless Router (gs583ad3-01)

1 Answer

I have a actiontec gt704wg trying to connect another router behind it .... iam not able to ...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 171 Answers

Your other router has to have the following settings:

1) it's IP must be on the same subnet as your actiontec. The subnet is the "third" number in the ip address. So if your actiontec has ip of 192.168.1.0, your other router must have IP of 192.168.1.XXX where xxx is some number other than 0.

2) the dhcp server of your other router must be turned off

3) you must run a lan cable from a lan port on the actiontec to a lan port on the other router. Note that the internet/wan ports are NOT used on either router for the purpose of daisy-chaining routers together.

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I connect a GT704WG to a COMCAST SciAlt modem and have wireless


No. The uplink for the Actiontec is the DSL port. You would be better off purchasing a router from a retailer instead of a gateway modem/router combo like the Actiontec

Sep 24, 2010 | Actiontec GT704WG Wireless Router...

1 Answer

My actiontec gt704wg wont work


1. Check the light status of the dsl or cable light
(solid).
2. Go through the basic setup and see if you have the correct settings.

May 22, 2010 | Actiontec GT704WG Wireless Router...

1 Answer

Actiontec Gt704WG wireless problem


fist try to enter modem config site at 192.168.1.1
admin user: admin
admin pws: password
wireless setup
check if wireless is on
check chanel
las step
try this with ips suport is you reset mdoem it returns to factory settings
try to reset it with a paper clip or pen hold it for 20 seconds

May 03, 2010 | Actiontec GT704WG Wireless Router...

2 Answers

What is the ip code for the actiontec gt704wg router and where do i input this info?


if your router have DHCP enabled plug an connect your network card into your router.

when you see that it gives you an ip address just type in command prompt: ipconfig /all and at Gateway you will see your router address

Feb 21, 2010 | Actiontec GT704WG Wireless Router...

1 Answer

Have a GT704WG Actintec router and am having a


check channel must be on 11 for windows computers

Feb 12, 2010 | Actiontec GT704WG Wireless Router...

1 Answer

ActionTec GT704WG - can it be "unlocked" ?


hi,

you can try to reset the router itself,there is a little button at the back of it where you can insert a pin or a pencil,make sure that the router is on then press and hold the reset button for one minute then turn it off,then connect it to you ATT and access the firmware,if its still the same,theres no way for you to use it since thats the only way that you can do...

thanks and God Bless

Jan 26, 2010 | Actiontec GT704WG Wireless Router...

1 Answer

Actiontec GT704WG doesnt connect to internet


HI! all your computer is connected except for one, you are connected to to the local network but cant get an internet connection, I dont see any problem with your wireless connection bcoz you are connected to the lan, check the security settings of your browser on your windows vista, go to internet option and security, lower it down to medium security, so that you can access the internet or try using other browser like firefox or google chrome.. check your firewall settings as well on your windows vista..

Aug 08, 2009 | Actiontec GT704WG Wireless Router...

1 Answer

Got a used actiontec dsl router gt704wg and cant make it connect?


Go to http://www.actiontec.com/support/index.php and see if you can download the manual. You will need it to know how to set it up with the information provided by your DSL ISP.

Jun 11, 2009 | Actiontec GT704WG Wireless Router...

1 Answer

Actiontex gt704wg mac cloning


Go here:
http://www.actiontec.com/support/broadband/gt704-wg.html


If Actiontec doesn't have your answer, then you'll want to get a separate hub or router to connect both computers.

Jan 29, 2008 | Actiontec GT704WG Wireless Router...

Not finding what you are looking for?
Actiontec GT704WG Wireless Router (gs583ad3-01) Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Actiontec Routers Experts

Richard Schabler

Level 2 Expert

108 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you an Actiontec Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...