Question about Onkyo Audio & Video Receivers

4 Answers

HAve onyko sr606. No picture or sound. Using HDMI with Panasonic Blu ray and cable box. Can hear mp3 player through headphones but not through speakers

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, I am assuming that the unit was operating fine before. Pls try a reset by:

  • turn it on;
  • while holding down the [VCR/DVR] button,
  • press the [ON/STANDBY] button.
Should that be not corrective, then the unit has to be opened up for diagnosis. Probable problem with the logic circuitry, auto-protect mode or the final/amplifier section.

Good luck and Thank you for using FixYa.

Posted on Dec 07, 2008

  • Louie  Role
    Louie Role Dec 12, 2008

    Hi again,



    Any updates or developments so far?



×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 304 Answers

Hi there,

check and correct all possible wrong connections.

try removing the sound video connections and put it back again on a right port.

please keep us more updated regarding this, an additional info much appreciated.

thanks

Posted on Dec 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,183 Answers

Hi,
Could you be more descriptive ,with the connections between Onkyo receiver, panasonic player and the cable box. So that we can help you out better.

thanks
proton

Posted on Dec 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 365 Answers

The system output is not working or the output cables may be damaged .please check it

Posted on Dec 07, 2008

  • JITHIN ANTONY Dec 14, 2008

    does the problem solved

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Onkyo TX-SR606 HDMI Input


The problem is the hdmi board in the receiver .they are having trouble with the smd regulator and smd capactors that they are using on the board,they have updated the new boards as i have not got any back when replacing with the new boards. I have replaced at least 35 hdmi boards on this model. If you call Onkyo they will tell you that you have a hdmi board bad and take it to an onkyo dealer.

Apr 01, 2010 | Onkyo TX-SR606 Receiver

2 Answers

No Audio


cant use both hdmi and opti outs try sum setting in blue ray but u nee dto plug all blue ray dish directto samsung hdmi then 1 master digital out form tv to sterio digital i n ok tell samsung your output also

Jan 20, 2008 | Sony STR-DG510 Receiver

5 Answers

I cannot get video signal from my Samsung p1590 Blu Ray player via HDMI to pass through my Onkyo TX-SR606 AV Receiver. I get video if I connect Blu Ray player directly to TV, and have tried all HDMI ports...


I think this one is for the Onkyo wizards:

I would write them via email here:

http://www.onkyousa.com/feedback_form.cfm

1-800-229-1687
However I did find this 2 page hookup manual with nice notes at link listed below that may help you solve the mystery:

(seems you may have to assign the digital input)

http://filedepot.onkyousa.com/Files/QuickHookup/TX-SR606_QSS_En_A.pdf?CFID=918117&CFTOKEN=40624545&jsessionid=f0306ea8a0d68bb60a49102e3e5510576756


Assigning the Digital Input
If there’s no sound, you’ll need to assign the digital inputs as
necessary using the setup menus on the TX-SR606’s display.
If you connect your DVD player to the AV receiver’s COAXIAL 1
DIGITAL IN, and your cable/satellite receiver to the COAXIAL 2
DIGITAL IN, as shown, it’s not necessary to assign the digital input.
The onscreen setup menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the
COMPONENT VIDEO OUT, use the TX-SR606’s display when changing settings.

Thanks for using FixYa!

Kelly

Feb 19, 2010 | Onkyo TX-SR606 Receiver

4 Answers

I just bought a Blue Ray player but my surround sound has a dvd player built in and only one input which I have my new Sharp TV plugged into. How can I hook up my Blue Ray . I have the HDMI cables


Depending on if your surround system has a hdmi input or not. if it does you can connect the blu-ray player to it. If it doesn't have an hdmi input you will have to run the hdmi cable from the blu-ray to the tv then run a set of rca cables (red and white plugs) from the tv audio out to the surround systems' audio input jacks to get sound through the surround system. Most surround systems don't have an auxiliary input for another video device.

Nov 21, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo tx-sr606 turns off during loud dvd sounds.


It sounds like you have a defective unit. I would contact the manufacturer and ask to RMA it.

Aug 08, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo TX-SR606 getting no sound from HDMI sources on speakers. I have a motorola cable box and a panasonic DMP BD-35K blueray player both attached to the SR606 via HDMI cables (HDMI3 and 1 respectively)...


Not sure if this is your fix, but I had what I thought was the same problem. I played with my Onkyo quite a bit ensuring the correct assignments for HDMI, audio and all that stuff. Turns out I neglected to make sure the output devices were properly assigned. Many devices aren't default to output sound over HDMI. I changed the audio out settings on the cable box to HDMI and suddenly the Onkyo worked great. I know, I'm an idiot for not checking that in the first place, but maybe someone out there is having the same trouble as well.

Feb 20, 2009 | Onkyo TX-SR606 Receiver

3 Answers

HDMI connection with Panasonic DMP-BD35K Blu-Ray Disc Player


Try hooking the Panasonic up straight to the tv without going through the receiver. If it displays a picture its obviously not the blu-ray player. May also be a problem with the HDMI cable itself. Hope this helps.

Jan 04, 2009 | Onkyo TX-SR506 Receiver

1 Answer

Connecting blu ray to surround sound receiver to tv


Hi, I have just completed this installation myself.
You are correct, HDMI to Amp Input from Bluray and then HDMI from Amp output to TV. Coloured cables are not required to operate the bluray now.
Good luck

Jan 02, 2009 | Onkyo TX-SR606 Receiver

2 Answers

How to connect BLU-RAY DVD player to Pioneer Plasma TV via HDMI


The best possible solution to your problem is :
Connect your blu ray player directly to the HDMI input of you Plasma and watch HD video....
and connect the 5.1/7.1 sound thru the optical or the coaxial link directly to your AVR 3805.
You will not loose anything on the Blu-Ray.
The sound is best processsed by the AVR3805, while the video, which is the real upgrade (BluRay) in terms of resolution of picture would be processed by your plasma.

Connect and Enjoy

Dec 16, 2008 | Denon AVR-3805 Receiver

2 Answers

Onkyo TX-SR606 HDMI output issues


HDMI switching is an ongoing problem for the 606. A number of people are having the same problem. Mine is at the local repair shop and Onkyo has told them the part is on backorder until April. I would look at another brand or upgrade to a higher leval Onkyo.

Dec 12, 2008 | Onkyo TX-SR606 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio & Video Receivers Experts

D. E. Hev

Level 3 Expert

1059 Answers

gbob59

Level 3 Expert

2963 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Onkyo Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...