Question about Makita 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140

2 Answers

Mp3 or rca input in a makita 18 volt radio

Hey is there a way to open up a makita Lithiun ion radio and install a line in input for MP3  or ipod

Posted by on

  • TechTrainer May 11, 2010

    in short, yes there is a way to do it, but i think if someone was capable of wiring it up they wouldnt need instructions.



    if you want to give it a shot, just follow the line to the feed into the speaker and then locate the line running power. all you really need to do is hook into those.



    the bmr100w radio actually comes mp3 and ipod ready.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

You can buy a fm transmitter for about 15 bucks that will allow you to connect via radio.

Posted on Oct 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

See detail on Makita lxt202 click

Posted on Oct 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plugged my Makita Makita 7.2 18 volt ni-mh or li-ion battery Charger into 24O volt by mistake HELP


The circuit board is protected by means of a fuse and a varistor. The variatistor looks like a painted coin (penny-size) with a wire attached on each side. This is connected in parallel of the chargers main supply. The varistors job is to shortcircuit the main power (this causes the fuse to nlow) in the event of too high voltage, thus protecting the rest of the electronics.
you need A new varistor, new fuse and some basic soldering skulle.

enjoy :-)

Feb 10, 2014 | Makita 18V LXT Lithium - Ion Cordless...

1 Answer

I have a 18 volt makita cordless impact driver i can not get the driver bit out it seems to be stuck in the chuck very tight


Try holding the bit with pliers and running in reverse, maybe with a shot of oil. That might free it up. You can also try tapping it (firmly) on the side of the bit

Aug 18, 2011 | Makita 18V LXT Lithium - Ion Cordless...

1 Answer

Do you know if this screwgun will accept square head autofeed screws. Also can I use other bradnd screws than makita?


There is an accessory for a #2 square drive bit part number 784647-5 which you should be able to but at any store that sells Makita items. Also I would think (but am not certain) that any quality autofeed screws as long at the collation is the same should work.

May 03, 2011 | Makita BFR750 18-Volt LXT Lithium-Ion...

2 Answers

Between us my son and I have 10 18 volt batteries for our Makita power tools which we use in our Carpentry work of these 10 batteries 6 have failed. I have to say the reliabillity of the Ni-cad equipment...


Join the battery collectors club. I have 25 batteries, 12 guns, I quit buying the batteries, I found it cheaper to buy the gun with new batteries and charger once a year. Cause they don't even last that long. I have tried different brands too all the same. Got batteries?? Sure do.

May 15, 2010 | Makita Tools 18V 1/2" Lxt Lithium - Ion...

1 Answer

Between us my son and I HAVE 10 18 volt batteries for our Makita power tools which we use in our Carpentry work of these 10 batteries 6 have failed. I have to say the reliabillity of the Ni-cad equipment...


you got me. check your suppliers line of supply . I runas many lithium with a 10 man crew and we are punishing, to this day not a problem. we did have a problem using the smaller batteries, but no problems with the larger BL1830 batteries

Mar 28, 2010 | Makita Tools 18V 1/2" Lxt Lithium - Ion...

1 Answer

The Makita BL1815 battery will not charge, lights flash red/green, indicating bad battery. I replaced one open cell with known good cell, charger still reads bad battery although I can charge from an...


tried it a few times. got the charge up to around 13.9 and it still wont charge. i dont understand, because the battery isnt that old to begin with. thanks for the suggestion.

Dec 16, 2009 | Makita BL1815-2 18 Volt 1.5 Ah Compact...

1 Answer

My 18 volt makita battery wont charge and it is less than a year old. Do you know y? Can i fix it?


Those batterys need to be on the charger if they are not in the tool. I would try to get the store to exchange the entire set for a new one. If that fails ebay sells batterys pretty cheap.

Feb 25, 2009 | Makita Tools 18V 1/2" Lxt Lithium - Ion...

2 Answers

Makita BHP451 Question


Buy a hitachi li-ion 18 volt ds18dl.
All parts are repairable & replacebable should they breakdown. Ie gearbox.
Gearbox parts are not available on makita , only whole gearboix which can be expensive.
Cheers
Laurie

Aug 27, 2008 | Makita Tools 18V 1/2" Lxt Lithium - Ion...

Not finding what you are looking for?
Makita 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140 Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Makita Drills & Drill/Drivers Experts

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

River bottom

Level 2 Expert

174 Answers

Are you a Makita Drill and Drill/Driver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...