Question about Uniden TRU 4465-2 Cordless Phone (TRU4465-2)
SOURCE: swicth from tone to pulse
1) When the phone is in standby mode, press and hold the caller id/menu key.
2) Press the vol/ / key three times to select Dial.
3) Press the select key to toggle between Tone and Pulse.
4) Press the end key or return the handset to the base unit to complete the setting. The handset returns to standby mode.
This phone also has a feature that allows you to use Pulse dialing to make calls, but allows you to switch to tone dialing for automated systems (like “Please Press 1 for English) here are the steps for that:
Initially make your call with the pulse dialing mode. Once your call connects, press
the */tone key. Enter the desired number. These digits will be sent as tone dialing.
Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
Posted on Apr 07, 2009
SOURCE: can't change to pulse dialing
The Vetech phone will only support tone dialing. It does have a menu option that turns tone on or off but it still will not allow pulse dialing. I had to change the phone service from pulse dialing to tone dialing to get the phones to work. As it turned out, the phone company no longer charges extra for the tone service.
Posted on May 13, 2009
Here's what the manual says: Changing the Dial Mode (Tone or Pulse Dialing) (HS1 only) Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you need to change your phone's dial mode. If you don't get a dial tone or can't connect to the telephone network, follow the steps below to modify your phone?s settings: With the phone in standby, press and hold [cid/menu]. Press [vol/ / ] to move the pointer to select DIAL. Press [select/channel] to set the phone to pulse dialing. Press [end]. Return the handset to the base. The handset communicates the new setting to the base, and the base activates the setting on any other handsets. Hope this helps out. K
Posted on Jun 05, 2009
Hi, Below is the link for your phone's manual. It describes how your phone was changed from tone to pulse in Section 3-1. I would go through those steps again to see if the phone could be changed back to tone in the same manner. Hope this helps! Hal
Posted on Jun 09, 2009
Tips for a great answer:
Apr 23, 2011 | Vtech VT 2461 Cordless Phone
Jun 05, 2009 | Uniden 2.4 GHz Cordless Phone System
Dec 12, 2008 | Phones
Oct 25, 2008 | Vtech 2467 Cordless Phone
Aug 15, 2008 | Uniden Cordless Phone
Mar 16, 2008 | Phones
Sep 19, 2007 | NorStar Polycom Soundstation ( Phone...
Jan 11, 2007 | GE 29439GE2 Corded Phone
Feb 12, 2009 | Uniden TRU 4465-2 Cordless Phone...
Sep 15, 2007 | Uniden TRU 4465-2 Cordless Phone...
17 people viewed this question
Usually answered in minutes!