How do I get back to someone that answered my prayers?!

Most likely cause of the "Scanner could not be initialized" error on the HP Scanjet 3970 is due to using an incorrect power adapter and cord -- the only power module and cord that work for the HP Scanjet 3970 are these part numbers: 8120-6260 for the power cord and L1970-80003 for the power module / AC adapter I hope this info helps you.

Hello,
Here you are:
http://www.driverstock.com/download-HP-3970-driver/10-7-4669/index.html

Ok be sure to select the coresponding windows and type the security code accordingly.

Good luck

Uttam

i have tow truck flat bed the bed somestime no up

HP only have a basic vista driver for this scanner which won't give full functionality.

After you have UnScrewed and Opened Up the Scanner.
On the Circuit Board (Green Board with Electronic Components) just where you Plug in the Power Pin there is a Small Glass Tube Looking Component.
You need to replace that with a 1.2mA Fuse.

Hope this Helps

Hi, just go to HP drivers and solutions, i have Vista 64 bits.


Rgds, Auke.

not sure what you mean by what plugs go where but here is a link to the user manual.

http://h10032.www1.hp.com/ctg/Manual/bps05795.pdf

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=298549&prodTypeId=15179&prodSeriesId=298547&swLang=8&taskId=135&swEnvOID=228

Download the latest drivers, download the patch, install them both, that should fix your problem

Good luck

hi frined

take ur adper & show the store he will give u same needed code of power u have to nearest electronic or electrical store there u get a power cable

thmx using fixya

Witch OS do u have?