Question about 2wire (1000-100052-000) 802.11g/b Wireless Adapter

1 Answer

Install 2wire 1701hg without installation CD

How can I install my new 2wire 1701hg wifi wireless dsl modem router without the installation CD? i lost the install cd

Posted by on

  • Anonymous Apr 27, 2009

    Hi,



    My issue is this, briefly: I have a Dell PC. Up until a week ago it had Windows 2K, and 2wire wireless 802.11g talking to a 1701HG. This all was running fine.



    OS needed to be reinstalled, but reinstalled Windows 98 instead, as I have neither W2K CD, nor key. Long story. Machine is running much better. Now I realize I have no 2wire CD.



    I found the driver and installed it, at least I hope the correct one, as the OS recognizes it. I downloaded config software from 2wire site that looks it is correct, altough may be for XP.



    Am unable to configure the wireless adapter, as it sort of hangs in the config process. Gives message "Auto Association to the Access Point failed"



    I have put many URLs into the browser, including gateway.2wire.net, and have come up with zilch. Will this even run on W2K.



    Any input would be appreciated.



    Thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,338 Answers

1. pull up browser(ie internet explorer)
2. type 192.168.1.254/setup or http://homeportal/setup in the address field. (click on i forgot my password if you forget it. then if you can't figure out the pw with the hint provided then go click on " i still forgot my password". you can then reset the system password)
3. setup your 2wire 1701 page, double check if key codes are there. it should be 522P-22P4-6262-22AT-F2NV
4. In time zone page, just choose the one then click next.
5. setup connection info page, just make sure the username is your primary email address with your ISP and also the correct password. fill out the username and password and confirm password fields ONLY then click next. And you're DONE!

you just have to wait till it successfully establish a connection.
if you're still having problem after doing that maybe twice or more then i suggest giving your ISP a call. they can also send you the 2wire cd if your ISP supports 2wire modem. AT&T does.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i connect in dsl modem with laptop?


If your laptop has no built in wifi, a USB receiver can access nearby (wireless capable) routers or router/modems. Otherwise a CAT5 cable can hardwire your computer or laptop to a DSL modem. CAT5 is a little wider than telephone connectors. Then install drivers (and make sure the modem is compatible with your providers requirements, they are not all the same.)

Nov 05, 2013 | 2wire (1000-000005-002) 802.11g/b Wireless...

1 Answer

Need detailed help setting up my 2wire 1701hg gateway. I have high speed att dsl internet. I tryed already but att redirects me to there website, I tried calling them but they keep trying to charge mt 49$...


I can help you to configure the modem... Before that i need answers for certain questions....
How many lights are litup in your modem...? Do u have the light called "Internet and DSL" lit up in your modem ? Do you know the connection type ??? PPPoE If so do u know what is the Username and password ??

May 23, 2011 | 2wire (1000-100052-000) 802.11g/b Wireless...

1 Answer

No CD to install.


Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Jul 09, 2010 | Belkin BLKF5D8053 (00312328000P) Wireless...

1 Answer

Lost my install cd


Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Apr 02, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Install wireless notebook adapter without CD


This is an easy one, go to this web site http://www.nodevice.com/driver/company/Linksys.html download the correct driver, after it is downloaded, if required uncompress it, & install it, REBOOT, THEN and NOT before insert ya USB Wifi and it should automatically install the drivers ya via the prior installed Drivers, and install itself, otherwise simply "Point" it to the place where ya stored the Downloaded driver and it should proceed to finish from there. REBOOT. Now you can setup ya Wifi connection.

Jan 21, 2010 | 2wire (1000-100052-000) 802.11g/b Wireless...

1 Answer

How do i connect 2wire wireless to computer


Are you trying to install the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online
through the modem.
If your computer is able to go online through the
modem
Then you need to connect the computer to the router
ad the modem to the router.
open the set up page of the router and change the
settings of the router according to the ISP.
Click Here for more information about routers and network

Jan 10, 2010 | 2wire 802.11g (66800007236) 802.11g/b...

1 Answer

I have Lynksys WRT150N wireless home router i want to connect it with 512Kpp dsl modem . i tried to setup from CD but i'm getting message ( the router is not able to connect to internet.Try to switch DSL...


connect it by the LAN cable and then it should come with a default IP address found on the box or the bottom of the the wifi router enter that in your address bar and you will need to type a username and password that is also found on the box of the wifi router then you can then configure it from there. good luck

Oct 10, 2009 | Linksys WRT150N Wireless N Router -...

1 Answer

2wire wireless usb adapter installation for desktop


elomarcillo1,
You are attempting to install a (brand name) 2wire wireless usb adapter, normally the SBC DSL CD is ONLY what you would use to set up your SBC DSL modem. You should have a specific 2wire CD that you put in your CD Drive when you want to install the 2wire wireless usb adapter. Can you locate this CD?

-ms

Nov 09, 2008 | 2wire (1000-100052-000) 802.11g/b Wireless...

2 Answers

I am having a problem with 2wire diver


I had to reload my computer and I don't have the install CD for my wireless 2wire. Where can I get the info to reinstall data?

Jun 15, 2008 | 2wire Computers & Internet

2 Answers

2wire dropping xp pc


hello!

you may try this and see if this help solve your problem

Step 1try to connect your computer directly to the modem and check if you will also experience problem
Step 2: Shutdown the computer.
Step 3: reset the router while power on then Unplug the router’s power cable.
Step 4: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 5: Plug in the Broadband modem’s power cable and wait for its lights to appear
stable.
Step 6: Plug in the router's power cable once the modem’s lights appear stable.
Step 7: Power on the computer on and configure router settings if neede
Step 8:test the Internet connection.

if this still didnot work, maybe you need to upgrade the firmware of your router

May 01, 2008 | 2wire (1000-100052-000) 802.11g/b Wireless...

Not finding what you are looking for?
2wire (1000-100052-000) 802.11g/b Wireless Adapter Logo

4,259 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

noti13

Level 1 Expert

15 Answers

William Dehn
William Dehn

Level 3 Expert

318 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...