An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: I have a Mitsubishi ws-65907 tv How do I take the top...
There are 4 plastic plugs, two on each side, that cover the 4 screws that hold the top to the bottom. You will need an allen wrench to unscrew. You will have to take off screws from the back panel, and also pull the speaker grille off to unplug the wires going to the control panel when you split in half.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No,this problems is not the projection lamp problems.The tv now have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or look like 3D pictures.The tv convergence board,the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like 300-350 for parts and labors.
There are 4 plastic plugs (2 per side) that cover the allen wrench screws holding the top to the bottom. You will also have to take screws out of the back and pull the speaker grille to unhook the control panel. After unhooking and unscrewing everything, the tv will split in half.
look at this:
then these: ·http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm ·http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html